Alloy 20 Pipe Bends

Alloy 20 Pipe Bends

Manufacturer of Alloy 20 Mitered Pipe Bend, Alloy 20 Customized Pipe Bend

Supplier of Alloy 20 Long Radius Bend, Alloy 20 Pipe Bend in India

Alloy 20 Pipe Bend manufacuter in IndiaAlloy 20 Pipe Bend

Alloy 20 U Pipe Bend Manufactuer of IndiaAlloy 20 U Pipe Bend

Alloy 20 Piggable Pipe Bend Manufactuer of IndiaAlloy 20 Piggable Pipe Bend

Standard Specification for Alloy 20 Pipe Fittings:

Specifications : ASTM B366 & ASME SB366

Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75

Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Outer Diameter : 38.0 mm – 206.0 mm

Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request

Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm

Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°

Equivalent Grades for Alloy 20 Pipe Fittings:

STANDARD WERKSTOFF NR. UNS EN AFNOR
Alloy 20 2.4660 N08020 NiCr20CuMo Z2NCUD31-20AZ

Chemical Composition Alloy 20 Pipe Fittings

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3.00 – 4.00 32.00 – 38.00 19.00 – 21.00 29.85 min* 2.00 – 3.00 0.045 max

Mechanical Composition Alloy 20 Pipe Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Alloy 20 8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30 %

Exporter of Alloy 20 J Pipe Bend, Alloy 45 Deg. Pipe Bend

Stockholder of Alloy 20 10D Pipe Bend, ANSI B16.9 Alloy 3D Pipe Bends in Mumbai
Check price list and standard of Alloy 20 Hot Induction Bend

Comments are closed.