Standard ASME B16.9 wraps in several points which acts as a guideline for the manufacturer of wrought grade buttwelding fittings produced in a factory such as elbows, tees, reducers etc. These fittings for e.g. eccentric reducer, produced by the Eccentric reducer manufacturers need to conform to the values of the following points i.e. ratings, testing, overall dimensions, tolerances, and markings. Depending on the requirement of the industry, these reducers could be produced with their size ranging anywhere between DN 15 to DN 1200. A reducer is a kind of a fitting device that could be used in piping systems in order to help the worker to modify, or in this case, reduce the size of the flow from large to small by reducing the size of the pipe.
ASME B16.9 Eccentric Reducer
Stainless Steel Eccentric Reducer
Carbon Steel Eccentric Reducer
Reducers could be further classified into two kinds – concentric and Stainless Steel Eccentric Reducer. Speaking about an eccentric pipe reducer, this is a type of fitting that has one edge which is parallel to connecting pipe. The presence of this feature is what prevents the accumulation of air. Typically the ASME B16.9 Eccentric reducer is used to maintain the same bottom of the pipe in a system. These fittings are extensively used when the pipe runs long on a sleeper or a pipe rack in addition to which there are several other pipes that are also supported from the same top of steel. Exceptions are at pump suction where the Carbon Steel Eccentric reducer is required to have its flat side up in order to avoid bubble formation in the pump inlet which in turn could lead to cavitation. Thus, damaging the impellers of the pump.
Table of Content
Specifications | Eccentric Reducer |
---|---|
Eccentric Reducer Pipe Fittings size | Seamless Butt Weld Fittings: 1/2″ – 10″ Welded Butt Weld Fittings: 1/2″ – 48″ |
Eccentric Reducer Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Eccentric Reducer Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Eccentric Reducer Types | Seamless / ERW / Welded / Fabricated Pipe Fittings |
Eccentric ReducerType | DN15-DN1200 |
Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings |
Size Range | ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
Eccentric Reducer Fittings | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
Manufacturing process | Push, Press, forge, Cast, etc. |
Eccentric Reducer Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Key markets and industries for Eccentric Reducer |
|
Code RCD REISO | Ø BIG | Ø SMALL | HEIGHT H mm | THEORETICAL WEIGHT KG | ||||
---|---|---|---|---|---|---|---|---|
DN | D mm | Thickness S mm | DN | d mm | Thickness s mm | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1″1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1″1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1″1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1″1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1″1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2″1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1″1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1″1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1″1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1″1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2″1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1″1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2″1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2″1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2″1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
Eccentric Reducer type | Eccentric Reducer Price in India | Eccentric Reducer Price in USD | Eccentric Reducer Price in UAE Dirham |
---|---|---|---|
ASTM A234 CS WPB 3/4″ x 1/2″ Eccentric Reducer Price in India | INR 6096.17 / Kg | USD $ 88.06 /Kg | AED 323.26 UAE Dirham |
ASTM A234 Carbon Steel 1″ x 2″ x 1/4″ Eccentric Reducer Price List | INR 8585.46 / Kg | USD $ 122.86 /Kg | AED 451.29 UAE Dirham |
Carbon Steel Gr WPB 3″ x 2″ Eccentric Reducer in Mumbai | INR 6220.72 / Kg | USD $ 89.02 /Kg | AED 326.99 UAE Dirham |
ASTM A403 WP 304 B16.9 BW Reducer R=1.5D, SCH-40S | INR 84.38 / Kg | USD $ 1.19 /Kg | AED 4.36 UAE Dirham |
ASTM A403 WP 304 B16.9 BW Reducer R=1.5D, SCH-40S | INR 362.81 / Kg | USD $ 5.11 /Kg | AED 18.75 UAE Dirham |
NPS | LBS | KG |
3/4-1/2 | 0.17 | 0.08 |
3/4-3/8 | 0.15 | 0.07 |
1-3/4 | 0.4 | 0.18 |
1-1/2 | 0.4 | 0.18 |
1.1/4-1 | 0.5 | 0.23 |
1.1/4-3/4 | 0.4 | 0.18 |
1.1/4-1/2 | 0.4 | 0.18 |
1.1/2-1.1/4 | 0.7 | 0.32 |
1.1/2-1 | 0.62 | 0.28 |
1.1/2-3/4 | 0.54 | 0.24 |
1.1/2-1/2 | 0.5 | 0.23 |
2-1.1/2 | 0.9 | 0.41 |
2-1.1/4 | 0.84 | 0.38 |
2-1 | 0.76 | 0.34 |
2-3/4 | 0.7 | 0.32 |
2.1/2-2 | 1.5 | 0.68 |
2.1/2-1.1/2 | 1.38 | 0.63 |
2.1/2-1.1/4 | 1.25 | 0.57 |
2.1/2-1 | 1.25 | 0.57 |
3-2.1/2 | 2 | 0.91 |
3-2 | 1.8 | 0.82 |
3-1.1/2 | 1.7 | 0.77 |
3-1.1/4 | 1.6 | 0.73 |
3.1/2-3 | 3.15 | 1.43 |
3.1/2-2.1/2 | 2.88 | 1.31 |
3.1/2-2 | 2.75 | 1.25 |
3.1/2-1.1/2 | 2.5 | 1.13 |
3.1/2-1.1/4 | 2.4 | 1.09 |
4-3.1/2 | 3.5 | 1.59 |
4-3 | 3.38 | 1.53 |
4-2.1/2 | 3.25 | 1.47 |
4-2 | 3 | 1.36 |
4-1.1/2 | 2.88 | 1.31 |
5-4 | 6 | 2.72 |
5-3.1/2 | 5.75 | 2.61 |
5-3 | 5.5 | 2.49 |
5-2.1/2 | 5.25 | 2.38 |
5-2 | 5 | 2.27 |
6-5 | 8.5 | 3.86 |
6-4 | 8.25 | 3.74 |
6-3.1/2 | 8.25 | 3.74 |
6-3 | 8 | 3.63 |
6-2.1/2 | 7.25 | 3.29 |
8-6 | 13.2 | 5.99 |
8-5 | 12 | 5.44 |
8-4 | 11 | 4.99 |
8-3.1/2 | 11 | 4.99 |
10-8 | 22 | 9.98 |
10-6 | 21.5 | 9.75 |
10-5 | 21 | 9.53 |
10-4 | 20 | 9.07 |
12-10 | 34 | 15.42 |
12-8 | 32 | 14.51 |
12-6 | 31 | 14.06 |
12-5 | 30 | 13.61 |
14-12 | 60 | 27.22 |
14-10 | 59.2 | 26.85 |
14-8 | 58.5 | 26.54 |
14-6 | 58 | 26.31 |
16-14 | 71 | 32.21 |
16-12 | 70 | 31.75 |
16-10 | 69.5 | 31.52 |
16-8 | 68.5 | 31.07 |
16-6 | – | – |
18-16 | 85 | 38.56 |
18-14 | 84 | 38.1 |
18-12 | 83 | 37.65 |
18-10 | 82 | 37.19 |
18-8 | – | – |
20-18 | 125 | 56.7 |
20-16 | 124 | 56.25 |
20-14 | 122 | 55.34 |
20-12 | 120 | 54.43 |
20-10 | – | – |
20-8 | – | – |
22-20 | 142 | 64.41 |
22-18 | 138 | 62.6 |
22-16 | 131 | 59.42 |
22-14 | 123 | 55.79 |
22-12 | – | – |
22-10 | – | – |
24-22 | – | – |
24-20 | 150 | 68.04 |
24-18 | 148 | 67.13 |
24-16 | 145 | 65.77 |
24-14 | – | – |
24-12 | – | – |
24-10 | – | – |
26-24 | 207 | 93.89 |
26-22 | 200 | 90.72 |
26-20 | 190 | 86.18 |
26-18 | 182 | 82.55 |
26-16 | – | – |
26-14 | – | – |
26-12 | – | – |
28-26 | 224 | 101.6 |
28-24 | 216 | 97.98 |
28-22 | 210 | 95.25 |
28-20 | 199 | 90.26 |
30-28 | 241 | 109.32 |
30-26 | 232 | 105.23 |
30-24 | 224 | 101.6 |
30-22 | 220 | 99.79 |
30-20 | 220 | 99.79 |
NPS | LBS | KG |