ASME B16.9 Cap
Standard ASME B16.9 takes into consideration many variables which then act as a recommendation for the manufacturer of wrought alloy buttwelding fittings produced in a factory such as elbows, caps, crosses, tees, reducers etc. These fittings including the pipe end caps are required to conform to the values such as ratings, testing methods used, overall dimensions, tolerances that are given, as well as markings that need to be on the fitting. Although the pipe ends could be produced with their size ranging anywhere from DN 15 to DN 1200, the size chosen will eventually depend on the requirement of the industry.
ASME B16.9 Cap
Stainless Steel End Cap
ANSI B16.9 Pipe Cap
Carbon Steel Pipe Cap
ANSI B16.9 End Cap
4 Inch End Cap
We are leading Stainless Steel End Cap Manufacturer, View Sizes and Weight Chart of Stainless Steel Pipe Cap
The ASME B16.9 Cap is a fitting used in a piping system that acts as a protective device. Which means pipes ends, which are also referred to as pipe caps are designed with the intention of protecting the ends of pipes with various shapes. The primary purpose of using an ANSI B16.9 End Pipe Cap is to build waterproof connections. Pipe ends are also used to close or seal the ends of either a hydraulic or a pneumatic piping/ tubing system. Copper pipe end cap, as fitting is a highly demanded, integral part of any piping system. The Carbon Steel End Cap could also be used as a piping header for future connection. One of the most commonly used materials to produce this fitting is stainless steel. A Stainless Steel End Cap is able to offer much more than the conventionally used carbon steel or an alloy steel grade with its increased corrosion resistance as well as high mechanical properties.
Steel Pipe End Cap Manufacturer
ASME B16.9 Cap Specification Table
| Specification : | ASME B16.9 |
| Size Chart : | SLMS Cap : To 1/2″ – 10″ Weld Pipe Cap : To 1/2″ – 48″ |
| Type : | BW / SMLS / Welded / Fabricated / ERW |
| Manufacturers Process : | Push, Press, forge, Cast, Marking, Packing In Boxes For Sale. |
| Export to | Mumbai, Gujarat, Janeiro, Indore, Port-of-Spain, Montreal, Bangalore, Ahmedabad, Noida, Coimbatore, Santiago, Perth, Surat, Kolkata, Melbourne, Rajkot, Khobar, Riyadh, Baroda, Dammam, Hyderabad, Calgary, Bogota, Ankara, Caracas, Courbevoie, Muscat, Manama, Abu Dhabi, Ernakulam, London, Ludhiana, Kuwait, Thiruvananthapuram, Tehran, New Delhi, Bengaluru, Gurgaon, Ludhiana, Ahvaz, Kanpur, Howrah, Pimpri-Chinchwad, Chennai, Istanbul, Jamshedpur, Nagpur, Mexico, Gimhae-si, Sydney, Lagos, Ranchi, Vadodara, Tau |
| Size Range : | ½” NB to 24″ NB in Schedule 10s, Schedule40s, Schedule 80s, Schedule 160s |
| Standard : | ASME B16.25, ASME B16.9, BS10, BS4504, ANSI B16.28, JISB2313, ASME B16.38, MSS-SP-43, JISB2311, ASME B16.47, BS4504, MSS SP-75 DIN2605, BS1560, BS, JISB2312, GB, ISO, DIN |
| Origin And Mills : | Russian, India, Japanese, USA |
| Connection Type : | Welding |
| Industries For Use : | Nuclear Power Plant Oil And Gas Industry Petrochemical Industry |
| Thickness :: | SCH10, 120, STD 40, 20, 60, XS, 80, 30, 100, 140 |
Refer ANSI B16.9 End Cap Price List Ex Mumbai, View Copper Pipe End Cap Dimensions
Various Types of Steel Pipe End Cap
Asme B16.9 Weld Cap
Asme B16.9 Pipe Cap
Brass End Cap
Copper Pipe End Cap
4 Inch End Cap
Stainless Steel End Cap
24 Carbon Steel Pipe Cap
Stainless Steel Pipe Cap
Stainless Pipe Cap
2 Inch Aluminum Pipe Cap
brass pipe end cap
copper gas pipe end cap
Leading Manufacturer of 24 Carbon Steel Pipe Cap, Purchase 4 Inch End Cap at factory price,
Carbon Steel End Cap Dimension Chart
| Code FOSTD – FOXS | Nominal Diameter | Wall Th. S mm | Height H mm |
Theoretical Weight kg | |||
|---|---|---|---|---|---|---|---|
| Poll. | D mm | STD | XS | STD | XS | ||
| 5 | 1/2 | 21.34 | 2.77 | 3.73 | 25.4 | 0.03 | – |
| 7 | 3/4 | 26.67 | 2.87 | 3.91 | 25.4 | 0.06 | 0.08 |
| 10 | 1 | 33.40 | 3.38 | 4.55 | 38.1 | 0.10 | 0.14 |
| 12 | 1” 1/4 | 42.16 | 3.56 | 4.85 | 38.1 | 0.14 | 0.18 |
| 25 | 2” 1/2 | 73.02 | 5.16 | 7.01 | 38.1 | 0.41 | 0.45 |
| 15 | 1” 1/2 | 48.26 | 3.68 | 5.08 | 38.1 | 0.16 | 0.23 |
| 20 | 2 | 60.32 | 3.91 | 5.54 | 38.1 | 0.27 | 0.32 |
| 30 | 3 | 88.90 | 5.49 | 7.62 | 50.8 | 0.65 | 0.82 |
| 60 | 6 | 168.27 | 7.11 | 10.97 | 88.9 | 2.92 | 4.10 |
| 40 | 4 | 114.30 | 6.02 | 8.56 | 63.5 | 1.15 | 1.54 |
| 50 | 5 | 141.30 | 6.55 | 9.52 | 76.2 | 1.90 | 2.59 |
| 120 | 12 | 323.9 | 9.52 | 12.70 | 152 | 13.6 | 17.0 |
| 80 | 8 | 219.07 | 8.18 | 12.70 | 101.6 | 5.07 | 7.3 |
| 100 | 10 | 273 | 9.27 | 12.70 | 127 | 9.1 | 12.0 |
| 200 | 20 | 508 | 9.52 | 12.70 | 229 | 35.60 | 46.98 |
| 140 | 14 | 355.6 | 9.52 | 12.70 | 165 | 14.42 | 19.8 |
| 160 | 16 | 406.4 | 9.52 | 12.70 | 178 | 18.86 | 25.89 |
| 180 | 18 | 457.2 | 9.52 | 12.70 | 203 | 27.65 | 36.52 |
| 240 | 24 | 609.6 | 9.52 | 12.70 | 267 | 46 | 64.60 |
Price List of ASME B16.9 Cap
| ASME B16.9 Cap Price in India | Pipe End Cap Price in INR | ASME B16.9 Cap Price in USD | Pipe Cap Price in UAE Dirham |
| ASME SA234 GR WP91 CAP 18 THK 55.68MM BEVELLED END ASME B16.9 SEAMLESS Per Kg | Rs. 1,264 | US $17.00 | UAE Dirham 62.43 |
Check Pressure Rating & Dimensions of Asme B16.9 Weld Cap and Steel Pipe End Cap
Stainless Steel End Cap Weight
| Normal Pipes Size | STD | XS | Schedule 160 | XXS |
| 1.1/4 | 0.14 | 0.18 | 0.23 | 0.34 |
| 2 | 0.27 | 0.34 | 0.57 | 0.68 |
| 1 | 0.09 | 0.14 | 0.18 | 0.23 |
| 1.1/2 | 0.18 | 0.23 | 0.27 | 0.41 |
| 2.1/2 | 0.41 | 0.45 | 0.79 | 1.13 |
| 4 | 1.13 | 1.36 | 2.68 | 3.4 |
| 3 | 0.68 | 0.79 | 1.32 | 1.81 |
| 3.1/2 | 0.91 | 1.13 | – | 2.72 |
| 5 | 2.04 | 2.49 | 4.54 | 5.44 |
| 10 | 9.07 | 11.34 | 25.85 | – |
| 6 | 2.95 | 4.08 | 6.8 | 8.16 |
| 8 | 5.44 | 7.26 | 14.06 | 13.61 |
| 18 | 24.49 | 32.66 | – | – |
| 12 | 13.61 | 16.33 | 43.09 | – |
| 14 | 16.33 | 20.41 | – | – |
| 22 | 42.64 | 56.7 | – | – |
| 16 | 18.14 | 24.49 | – | – |
| 30 | 78.02 | 103.87 | – | – |
| 20 | 34.02 | 39.01 | – | – |
| 24 | 43.54 | 58.97 | – | – |
| 26 | 53.98 | 72.12 | – | – |
| NPS | STD | XS | SCH 160 | XXS |
ASME B16.9 Cap Tolerance Chart
| DIMENSIONAL TOLERANCES – CAPS | ||||
| For all fittings | Caps | |||
| Nominal Pipe Size (NPS) | Outside Ø at Bevel | Inside Ø at End | Wall Thickness t / t1 |
Overall Length E |
| 1/2 a 2 1/2 | 1 | 0,8 | Not | 4 |
| 3 a 3 1/2 | 1 | 1,6 | less | 4 |
| 4 | +2 -1 | 1,6 | than | 4 |
| 5 a 6 | +3 -1 | 1,6 | 87,50% | 7 |
| 8 | 2 | 1,6 | of nominal | 7 |
| 10 | +4 -3 | 3,2 | tickness | 7 |
| 12 a 18 | +4 -3 | 3,2 | 7 | |
| 20 a 24 | +6 -5 | 4,8 | 7 | |
| 26 a 30 | +7 -5 | 4,8 | 10 | |
| 32 a 48 | +7 -5 | 4,8 | 10 | |
Pipe End Cap Material
| Stainless Steel | ASTM A403 WP Gr. 309, 304, 347, 310, 316, 304H, 316L, 321, 317L, 904L |
| Carbon Steel | ASTM A234 WPBW, WPHY 60, WPB, WPHY 42, WPHY 65, WPHY 52, WPHY 46, WPHY 70. |
| Duplex Steel | ASME SA 815 UNS NO S31803, ASTM A 815, S32205. Werkstoff No. 1.4462 |
| Nickel Alloy | ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 6625 (INCONEL 625), UNS 2201 (NICKEL 201 ), UNS 6601 ( INCONEL 601 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 4400 (MONEL 400 ), UNS 6600 (INCONEL 600 ), UNS 10276 ( HASTELLOY C 276 ) |
| Low Temperature Carbon Steel | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel | ASTM A234 Gr. WP9, WP5, WP11, WP1, WP22, WP12, WP91 |
Ask for free sample of 2 Inch Aluminum Pipe Cap, We stock Brass End Cap in various sizes
Check Below Countries Who Buy From Us ANSI B16.9 End Cap
| ASME B16.9 Carbon Steel Large Pipe End Cap | China, Sweden, Colombia, Malaysia |
| asme b16.9 butt weld caron steel pipe cap | Malaysia, United Arab Emirates (UAE), Turkey, Norway |
| SCH40 ASME B16.9 BW ASTM A403 GR. WP316L STAINLESS STEEL CAP | Finland, Malaysia, USA, Bangladesh |
| Cap A234 WBP48Inch SCH40 Carbon Steel End Cap BW B16.9 | Belgium, Dammam -KSA, Indonesia, Philippines |
| Stainless Pipe Cap | Singapore, Bahrain, South Africa, Singapore |
| 2 Inch Aluminum Pipe Cap | Brazil, South Africa, Saudi Arabia (KSA), Kuwait |
| Brass End Cap | Thailand, Qatar, France, Europe |
| Copper Pipe End Cap | Ellington -United States, UK, Canada, Poland |
| 4 Inch End Cap | UAE, Oman, Malaysia, Hong Kong |
| Butt-Weld Alloy Steel Pipe Cap | Malaysia, Czechia, Germany, Thailand |
| Stainless steel Cap Female ASME B16.9 | UAE, United Kingdom -UK, Europe, Malaysia |
| CAP SMLS BW SCH20, ASME B16.9 | Malaysia, Singapore, South Korea, NY 12203 (USA) |
| Asme B16.9 Butt Weld Titanium Pipe Cap | Dubai, Netherlands, Malaysia, Russia |
| B16.9 24" 36" Large Galvanized Pipe End Cap | Nigeria, Philippines, Australia, UK |
| MSS SP-75 Stainless Steel Pipe Cap | Philippines, Malaysia, Taiwan, Los Alamos -Mexico |
| 8 in. Schedule 40 304L, Cap Buttweld | Singapore, Philippines, Malaysia, Canada |
| 2-1/2 in. Straight Standard Stainless Steel Pipe Cap | Singapore, Chile, Italy, Iran |
| Sch 20 * Sch 40 Inch Seamless Pipes End Cap | UK, Egypt, Spain, Mexico |
| 2 inch. Weld Pipe End Cap Copper | Malaysia, Europe, Japan, Romania |