Dinesh Industries > Lap Joint Flange

Lap Joint Flange

Carbon steel lap joint flange are similar to a Slip On flange. The main difference is at the radius located at the intersection on the face of the lap joint flange and the bore which has the ability to accommodate the flanged portion of the Stub End. While a Lap joint flange is not manufactured with a raised face, they are used in tandem with a stub end. The load or pressure bearing ability of a Lap joint flange is only slightly better than a slip on flange. Whereas in comparison to Welding Neck flanges, the fatigue life of this component is only one tenth that of the former. A  ASME B16.5 Lap Joint Flange is slipped over a pipe and is seated on the back of the stub end. Both the flange and the stub end are held together by the pressure of the bolts.

ASME B16.5 Lap Joint Flange

ASME B16.5 Lap Joint Flange

Stainless Steel Class 150 Lapped Joint Flange

Stainless Steel Class 150 Lapped Joint Flange

2 Inch Lap Joint Flanges

2 Inch Lap Joint Flanges

Cl.150 A105 Lap Joint Flange Ansi 16.5

Cl.150 A105 Lap Joint Flange Ansi 16.5

Jis 10k Lap Joint Flanges

Jis 10k Lap Joint Flanges

Carbon Steel Rf Lap Joint Flange

Carbon Steel Rf Lap Joint Flange

Manufactuer of Stainless Steel Lap Joint Flange as Per B16.5 Standard, View Dimensions of Carbon Steel Lapped Joint Flanges

Since the use of lap joint flanges includes a separate stub end component, the two-piece Lap joint flange connection works out to be a cost-effective solution. This is noticed especially when the alloys used in their manufacture can be of a lower grade e.g. carbon steel in comparison to the material of the stub end. As the material to make the stub end is required to match the pipe grade, due to its contact with the conveyed fluid, particularly for piping systems that are stainless steel or nickel alloy based.

Using a PN16 Lap Joint Flange can have certain special advantages, such as :

  • Freedom for the flange to swivel around the pipe, which in turn facilitates the alignment of opposing flange bolt holes.
  • Lack of contact between the flange and the fluid in the pipe often permits the manufacturer to use inexpensive carbon steel in conjunction with a corrosion resistant pipe.
  • In piping systems where erosion or corrosion could occur rapidly, the Stainless steel lap joint flange could be salvaged for re-use.

Specification Format of ASME B16.5 Lap Joint Flange

Size  1/2″ (15 NB) to 48″ (1200NB)
Coating/Surface Treatment Oil Black Paint, Yellow Transparent, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized.
Flange Face Type Manufacturer Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Pressure class 150#, 300#, 600#, 1500#
Export to Calgary, Montreal, Kuwait, Ernakulam, Thiruvananthapuram, Tehran, Howrah, Courbevoie, Ahvaz, Chennai, Gurgaon, Abu Dhabi, Mumbai, Muscat, Port-of-Spain, Noida, Janeiro, Lagos, Melbourne, Coimbatore, Surat, Gujarat, Khobar, Ranchi, Tau, Nagpur, Pimpri-Chinchwad, Ludhiana, Sydney, Santiago, Indore, Perth, Mexico, Hyderabad, New Delhi, Manama, Caracas, Rajkot, Bengaluru, Gimhae-si, Bangalore, London, Ankara, Riyadh, Jamshedpur, Baroda, Ahmedabad, Kanpur, Bogota, Vadodara, Ludhiana, Istanbul, Kolkata, Dammam
Pressure Ratings PN6, PN10, PN16, PN25, PN40, PN64 etc.
Dimensions and Pressure Ratings Table D, E, F, & H, ANSI, BS4504, MSS- SP-44, BS3293, PN6, 10, 16, 25, 64 BS10, DIN Standards
Standards ANSI B16.47 Series A & B, ANSI B16.5, MSS SP44, ASA, API-605, AWWA, Custom Drawings.
Test Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector

Looking to Buy 2 Inch Lap Joint Flanges from Suppliers, Ask For ready stock of Cl.150 A105 Lap Joint Flange Ansi 16.5 in Mumbai

View Asme Class 150 Lap Joint Flange Price List

Asme Class 150 Lap Joint Flange Price in India ASME B16.5 Lap Joint Flange Price in INR Lap Joint Flange Price in USD ASME B16.5 Lap Joint Flange Price in UAE Dirham
FLANGE: A105N 1 1/2 LAP JOINT 300 FLANGE A105N 1 1/2AP JOINT 300 Per Unit Rs. 2,003 US $26.96 UAE Dirham 99.06

View Sizes of Jis 10k Lap Joint Flanges, Refer Specification and Chemical Properties of Carbon Steel Rf Lap Joint Flange

Class 150 Lb Lap Joint Flange Dimensions

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G                
1/2 15 90 30 16 22.9 60.3 11.2 3 4 1/2 50 55 5/8 M14 0.8
3/4 20 100 38 16 28.2 69.9 12.7 3 4 1/2 50 65 5/8 M14 0.9
1 25 110 49 17 34.9 79.4 14.3 3 4 1/2 55 65 5/8 M14 0.9
1 1/4 32 115 59 21 43.7 88.9 15.9 5 4 1/2 55 70 5/8 M14 1.4
1 1/2 40 125 65 22 50 98.4 17.5 6 4 1/2 65 70 5/8 M14 1.4
2 50 150 78 25 62.5 120.7 19.1 8 4 5/8 70 85 3/4 M16 2.3
2 1/2 65 180 90 29 75.4 139.7 22.3 8 4 5/8 75 90 3/4 M16 3.2
3 80 190 108 30 91.4 152.4 23.9 10 4 5/8 75 90 3/4 M16 3.7
3 1/2 90 215 122 32 104.1 177.8 23.9 11 8 5/8 75 90 3/4 M16 5
4 100 230 135 33 116.8 190.5 23.9 11 8 5/8 75 90 3/4 M16 5.9
5 125 255 164 36 144.4 215.9 23.9 11 8 3/4 85 95 7/8 M20 6.8
6 150 280 192 40 171.4 241.3 25.4 13 8 3/4 85 100 7/8 M20 8.6
8 200 345 246 44 222.2 298.5 28.6 13 8 3/4 90 110 7/8 M20 13.7
10 250 405 305 49 277.4 362 30.2 13 12 7/8 100 115 1 M24 19.5
12 300 485 365 56 328.2 431.8 31.8 13 12 7/8 100 120 1 M24 29
14 350 535 400 79 360.2 476.3 35 13 12 1 115 135 1 1/8 M27 41
16 400 595 457 87 411.2 539.8 36.6 13 16 1 115 135 1 1/8 M27 54
18 450 635 505 97 462.3 577.9 39.7 13 16 1 1/8 125 145 1 1/4 M30 59
20 500 700 559 103 514.4 635 42.9 13 20 1 1/8 140 160 1 1/4 M30 75
24 600 815 663 111 616 749.3 47.9 13 20 1 1/4 150 170 1 3/8 M33 100

Lap Joint Flange Class 300 Dimensions Table

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G                
1/2 15 95 38 22 22.9 66.7 14.3 3 4 1/2 55 65 5/8 M14 1.2
3/4 20 115 48 25 28.2 82.6 15.9 3 4 5/8 65 75 3/4 M16 1.4
1 25 125 54 27 34.9 88.9 17.5 3 4 5/8 65 75 3/4 M16 1.4
1 1/4 32 135 64 27 43.7 98.4 19.1 5 4 5/8 70 85 3/4 M16 1.8
1 1/2 40 155 70 30 50 114.3 20.7 6 4 3/4 75 90 7/8 M20 2.7
2 50 165 84 33 62.5 127 22.3 8 8 5/8 75 90 3/4 M16 3.2
2 1/2 65 190 100 38 75.4 149.2 25.4 8 8 3/4 85 100 7/8 M20 4.6
3 80 210 117 43 91.4 168.3 28.6 10 8 3/4 90 110 7/8 M20 5.9
3 1/2 90 230 133 44 104.1 184.2 30.2 11 8 3/4 95 110 7/8 M20 7.7
4 100 255 146 48 116.8 200 31.8 11 8 3/4 95 115 7/8 M20 10
5 125 280 178 51 144.4 235 35 11 8 3/4 110 120 7/8 M20 12.7
6 150 320 206 52 171.4 269.9 36.6 13 12 3/4 110 120 7/8 M20 17.7
8 200 380 260 62 222.2 330.2 41.3 13 12 7/8 120 140 1 M24 26
10 250 445 321 95 277.4 387.4 47.7 13 16 1 140 160 1 1/8 M27 36
12 300 520 375 102 328.2 450.8 50.8 13 16 1 1/8 145 170 1 1/4 M30 52
14 350 585 425 111 360.2 514.4 54 13 20 1 1/8 160 180 1 1/4 M30 75
16 400 650 483 121 411.2 571.5 57.2 13 20 1 1/4 165 190 1 3/8 M33 86
18 450 710 533 130 462.3 628.6 60.4 13 24 1 1/4 170 195 1 3/8 M33 113
20 500 775 587 140 514.4 685.8 63.5 13 24 1 1/4 185 205 1 3/8 M33 143
24 600 915 702 153 616 812.8 69.9 13 24 1 1/2 205 230 1 5/8 M39 216
Are you looking for Mild Steel Raised Face Lap Joint Flange Manufacturer. View Pressure Rating of of Composite Lap Joint Flanges

Dimensions Table of Lap Joint Flange Class 400

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G              
1/2 15 95 38 22 22.9 66.7 14.3 3 4 1/2 75 5/8 M14 1.3
3/4 20 115 48 25 28.2 82.6 15.9 3 4 5/8 90 3/4 M16 1.5
1 25 125 54 27 34.9 88.9 17.5 3 4 5/8 90 3/4 M16 1.8
1 1/4 32 135 64 29 43.7 98.4 20.7 5 4 5/8 95 3/4 M16 2.3
1 1/2 40 155 70 32 50 114.3 22.3 6 4 3/4 110 7/8 M20 3.2
2 50 165 84 37 62.5 127 25.4 8 8 5/8 110 3/4 M16 4.1
2 1/2 65 190 100 41 75.4 149.2 28.6 8 8 3/4 120 7/8 M20 5.9
3 80 210 117 46 91.4 168.3 31.8 10 8 3/4 125 7/8 M20 7.3
3 1/2 90 230 133 49 104.1 184.2 35 10 8 7/8 140 1 M24 9.6
4 100 255 146 51 116.8 200 35 11 8 7/8 140 1 M24 11.8
5 125 280 178 54 144.5 235 38.1 11 8 7/8 145 1 M24 14.1
6 150 320 206 57 171.4 269.9 41.3 13 12 7/8 150 1 M24 20
8 200 380 260 68 222.2 330 47.7 13 12 1 170 1 1/8 M27 31
10 250 445 321 102 277.4 387.4 54 13 16 1 1/8 190 1 1/4 M30 42
12 300 520 375 108 328.2 450.8 57.2 13 16 1 1/4 205 1 3/8 M33 59
14 350 585 425 117 360.2 514.4 60.4 13 20 1 1/4 210 1 3/8 M33 82
16 400 650 483 127 411.2 571.5 63.5 13 20 1 3/8 220 1 1/2 M36 107
18 450 710 533 137 462.3 628.6 66.7 13 24 1 3/8 230 1 1/2 M36 130
20 500 775 587 146 514.4 685.8 69.9 13 24 1 1/2 240 1 3/4 M39 157
24 600 915 702 159 616 812.8 76.2 13 24 1 3/4 265 1 7/8 M45 232

Class 600 Lap Joint Flange Dimensions Chart

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G              
1/2 15 95 38 22 22.9 66.7 14.3 3 4 1/2 75 5/8 M14 1.3
3/4 20 115 48 25 28.2 82.6 15.9 3 4 5/8 90 3/4 M16 1.4
1 25 125 54 27 34.9 88.9 17.5 3 4 5/8 90 3/4 M16 1.8
1 1/4 32 135 64 29 43.7 98.4 20.7 5 4 5/8 95 3/4 M16 2.3
1 1/2 40 155 70 32 50 114.3 22.3 6 4 3/4 110 7/8 M20 3.2
2 50 165 84 37 62.5 127 25.4 8 8 5/8 110 3/4 M16 4.1
2 1/2 65 190 100 41 75.4 149.2 28.6 8 8 3/4 120 7/8 M20 5.9
3 80 210 117 46 91.4 168.3 31.8 10 8 3/4 125 7/8 M20 7.3
3 1/2 90 230 133 49 104.1 184.2 35 11 8 7/8 140 1 M24 9.6
4 100 275 152 54 116.8 215.9 38.1 11 8 7/8 145 1 M24 16.8
5 125 330 189 60 144.4 266.7 44.5 11 8 1 165 1 1/8 M27 29
6 150 355 222 67 171.4 292.1 47.7 13 12 1 170 1 1/8 M27 36
8 200 420 273 76 222.2 349.2 55.6 13 12 1 1/8 190 1 1/4 M30 52
10 250 510 343 111 277.4 431.8 63.5 13 16 1 1/4 215 1 3/8 M33 77
12 300 560 400 117 328.2 489 66.7 13 20 1 1/4 220 1 3/8 M33 91
14 350 605 432 127 360.2 527 69.9 13 20 1 3/8 235 1 1/2 M36 105
16 400 685 495 140 411.2 603.2 76.2 13 20 1 1/2 255 1 5/8 M39 150
18 450 745 546 152 462.3 654 82.6 13 20 1 5/8 275 1 3/4 M42 182
20 500 815 610 165 514.4 723.9 88.9 13 24 1 5/8 285 1 3/4 M42 232
24 600 940 718 184 616 838.2 101.6 13 24 1 7/8 330 2 M48 332

Dimension of Class 900 Lap Joint Flange

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G              
1/2 15 120 38 32 22.9 82.6 22.3 3 4 3/4 110 7/8 M20 1.8
3/4 20 130 44 35 28.2 88.9 25.4 3 4 3/4 115 7/8 M20 2.3
1 25 150 52 41 34.9 101.6 28.6 3 4 7/8 125 1 M24 3.6
1 1/4 32 160 64 41 43.7 111.1 28.6 5 4 7/8 125 1 M24 4.1
1 1/2 40 180 70 44 50 123.8 31.8 6 4 1 140 1 1/8 M27 5.5
2 50 215 105 57 62.5 165.1 38.1 8 8 7/8 145 1 M24 11.5
2 1/2 65 245 124 64 75.4 190.5 41.3 8 8 1 160 1 1/8 M27 16.5
3 80 240 127 54 91.4 190.5 38.1 10 8 7/8 145 1 M24 12
4 100 290 159 70 116.8 235 44.5 11 8 1 1/8 170 1 1/4 M30 24
5 125 350 190 79 144.4 279.4 50.8 11 8 1 1/4 190 1 3/8 M33 38
6 150 380 235 86 171.4 317.5 55.6 13 12 1 1/8 190 1 1/4 M30 50
8 200 470 298 114 222.2 393.7 63.5 13 12 1 3/8 220 1 1/2 M36 78
10 250 545 368 127 277.4 469.9 69.9 13 16 1 3/8 235 1 1/2 M36 112
12 300 610 419 143 328.2 533.4 79.4 13 20 1 3/8 255 1 1/2 M36 148
14 350 640 451 156 360.2 558.8 85.8 13 20 1 1/2 275 1 5/8 M39 182
16 400 705 508 165 411.2 616 88.9 13 20 1 5/8 285 1 3/4 M42 193
18 450 785 565 190 462.3 685.8 101.6 13 20 1 7/8 325 2 M48 258
20 500 855 622 210 514.4 749.3 108 13 20 2 350 2 1/8 M52 317
24 600 1040 749 267 616 901.7 139.7 13 20 2 1/2 440 2 5/8 M64 608
Ask for free sample of Lap Joint Flange Asme B16.47, We stock Aluminum Lap Joint Flanges in various sizes

Lap Joint Flange Class 1500 Dimensions Table

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G              
1/2 15 120 38 32 22.9 82.6 22.3 3 4 3/4 110 7/8 M20 1.8
3/4 20 130 44 35 28.2 88.9 25.4 3 4 3/4 115 7/8 M20 2.3
1 25 150 52 41 34.9 101.6 28.6 3 4 7/8 125 1 M24 3.7
1 1/4 32 160 64 41 43.7 111.1 28.6 5 4 7/8 125 1 M24 4.1
1 1/2 40 180 70 44 50 123.8 31.8 6 4 1 140 1 1/8 M27 5.5
2 50 215 105 57 62.5 165.1 38.1 8 8 7/8 145 1 M24 9.8
2 1/2 65 245 124 64 75.4 190.5 41.3 8 8 1 160 1 1/8 M27 16.4
3 80 265 133 73 91.4 203.2 47.7 10 8 1 1/8 180 1 1/4 M30 21.8
4 100 310 162 90 116.8 241.3 54 11 8 1 1/4 195 1 3/8 M33 33
5 125 375 197 105 144.4 292.1 73.1 11 8 1 1/2 250 1 5/8 M39 59
6 150 395 229 119 171.4 317.5 82.6 13 12 1 3/8 260 1 1/2 M36 75
8 200 485 292 143 222.2 393.7 92.1 13 12 1 5/8 290 1 3/4 M42 118
10 250 585 368 178 277.4 482.6 108 13 12 1 7/8 335 2 M48 198
12 300 675 451 219 328.2 571.5 123.9 13 16 2 375 2 1/8 M52 264
14 350 750 495 241 360.2 635 133.4 13 16 2 1/4 405 2 3/8 M56 341
16 400 825 552 260 411.2 704.8 146.1 13 16 2 1/2 445 2 5/8 M64 454
18 450 915 597 276 462.3 774.7 162 13 16 2 3/4 495 2 7/8 M72 590
20 500 985 641 292 514.4 831.8 177.8 13 16 3 540 3 1/8 M76 792
24 600 1170 762 330 616 990.6 203.2 13 16 3 1/2 615 3 5/8 M90 1248

Class 2500 Lap Joint Flange Dimensions Chart

Lap Joint Flange dimensions

Size in Inch Size in mm Outer Diameter Flange Thick. Lapped Thick. Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
    A B C D E G              
1/2 15 135 43 40 22.9 88.9 30.2 3 4 3/4 120 7/8 M20 3.2
3/4 20 140 51 43 28.2 95.2 31.8 3 4 3/4 125 7/8 M20 3.7
1 25 160 57 48 34.9 108 35 3 4 7/8 140 1 M24 5
1 1/4 32 185 73 52 43.7 130.2 38.1 5 4 1 150 1 1/8 M27 7.5
1 1/2 40 205 79 60 50 146 44.5 6 4 1 1/8 170 1 1/4 M30 10
2 50 235 95 70 62.5 171.4 50.9 8 8 1 180 1 1/8 M27 17.5
2 1/2 65 265 114 79 75.4 196.8 57.2 8 8 1 1/8 195 1 1/4 M30 23
3 80 305 133 92 91.4 228.6 66.7 10 8 1 1/4 220 1 3/8 M33 37.8
4 100 355 165 108 116.8 273 76.2 11 8 1 1/2 255 1 5/8 M39 57
5 125 420 203 130 144.4 323.8 92.1 11 8 1 3/4 300 1 7/8 M45 95
6 150 485 235 152 171.4 368.3 108 13 8 2 345 2 1/8 M52 148
8 200 550 305 178 222.2 438.2 127 13 12 2 380 2 1/8 M52 221
10 250 675 375 229 277.4 539.8 165.1 13 12 2 1/2 490 2 5/8 M64 425
12 300 760 441 254 328.2 619.1 184.2 13 12 2 3/4 540 2 7/8 M72 500

Pressure Rating of Lap Joint Weld Neck Flange

Flanges pressure rating in psig for Socket Weld Flange ASME
Temperature (F°) 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 285 740 985 1480 2220 3705 6170
200 260 680 905 1360 2035 3395 5655
300 230 655 870 1310 1965 3270 5450
400 200 635 845 1265 1900 3170 5280
500 170 605 805 1205 1810 3015 5025
600 140 570 755 1135 1705 2840 4730
650 125 550 730 1100 1650 2745 4575
700 110 530 710 1060 1590 2655 4425
750 95 505 675 1015 1520 2535 4230
800 80 410 550 825 1235 2055 3430
850 65 320 425 640 955 1595 2655
900 50 230 305 460 690 1150 1915
950 35 135 185 275 410 685 1145
1000 20 85 115 170 255 430 715

Most Selling types of ASME B16.5 Lap Joint Flange

Asme Lap Joint Flange

Asme Lap Joint Flange

Aluminum Lap Joint Flange

Aluminum Lap Joint Flange

A105 Lap Joint Flange

A105 Lap Joint Flange

Ansi Lap Joint Flange

Ansi Lap Joint Flange

Asme Class 150 Lap Joint Flange

Asme Class 150 Lap Joint Flange

Awwa Lap Joint Flange

Awwa Lap Joint Flange

B16.5 Lap Joint Flange

B16.5 Lap Joint Flange

Lap Joint Backing Flange

Lap Joint Backing Flange

Lap Joint Flange Asme B16.47

Lap Joint Flange Asme B16.47

Lap Joint Blind Flange

Lap Joint Blind Flange

Cs Lap Joint Flange

Cs Lap Joint Flange

Composite Lap Joint Flange

Composite Lap Joint Flange

2 Inch Lap Joint Flange

2 Inch Lap Joint Flange

Jis 10k Lap Joint Flange

Jis 10k Lap Joint Flange

Large Diameter Lap Joint Flange

Large Diameter Lap Joint Flange

Ms Lap Joint Flange

Ms Lap Joint Flange

Available Material of Composite Lap Joint Flange

Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Brass 3602 / 2604 / H59 / H62 / etc.
Monel ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Titanium ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7

ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5

Alloy Steel ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
Carbon Steel ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Copper Nickel ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Copper T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Inconel ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750
Incoloy ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges
Super Duplex S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Hastelloy ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges
Aluminium 5052 /6061/ 6063 / 2017 / 7075 / etc.
Alloy 20 ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Duplex S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
254 Smo ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Nickel ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Other material Tin bronze, Alumunum bronze, Lead bronze
Nimonic Nimonic 75, Nimonic 80A, Nimonic 90

Check Material we Manufacturer and Exported in Below Countries

lap joint weld neck flange Japan, Thailand, Malaysia, Czechia
slip on lap joint flange Malaysia, Russia, UAE, Malaysia
forged b16.5 raised face lap joint flange Malaysia, Malaysia, Philippines, UK
pressed lap joint flange South Korea, Singapore, Singapore, Bahrain
pn16 lap joint flange Canada, Philippines, Belgium, Dammam -KSA
rf lap joint flange Europe, Norway, Malaysia, United Arab Emirates (UAE)
cuni lap joint flange Australia, NY 12203 (USA), China, Sweden
class 600 lap joint flange South Africa, Los Alamos -Mexico, Malaysia, United Kingdom -UK
galvanized lap joint flange Indonesia, UK, Nigeria, Philippines
Forged ASME B16.5 Inconel 600 Lap Joint Flange Germany, Iran, Singapore, Chile
hdpe lap joint flange Turkey, Canada, Dubai, Europe
150# 304 Stainless Steel Raised Face Lap Joint Flange Saudi Arabia (KSA), Malaysia, Singapore, Egypt
4 inch lap joint flange USA, Romania, Ellington -United States, Netherlands
composite lap joint flange Malaysia, Europe, Thailand, Qatar
cl.150 a105 lap joint flange ansi 16.5 France, Hong Kong, UAE, Oman
UNS N06600 Nickel Alloy LJ Flanges Italy, Poland, Malaysia, Philippines
Class 150 ASTM SS304 Forged Lap Joint Flanges Spain, Mexico, UK, Singapore
Titanium Lap Joint Flange Colombia, Bangladesh, Finland, Malaysia
ASME B16.5 EN 150lb 1/2" – 96"LJF Flange Taiwan, Kuwait, Brazil, South Africa