ASME B16.5 Pipe reducer Flanges are generally produced by a Reducing Flanges Manufacturer between the size range of NPS 1/2 through NPS 24 Metric/Inch. The standard used by them is the ASME B16.5 which covers several points such as materials, dimensions, marking, testing, tolerances, pressure-temperature ratings, and methods of designating openings for pipe flanges like the ASME B16.5 Reducing flange and flanged fittings. Besides these points, the ASME B16.5 standard also includes requirements and recommendations regarding the flange bolting, flange gaskets, as well as flange joints.
ASME B16.5 Reducing Flange
Stainless Steel Reducing Flanges
Cast Iron Reducing Flange
Ductile Iron Reducing Flange
Raised Face Weld Neck Reducing Flange
Class 300 Carbon Steel Reducing Companion Flange
Reducing Flanges are a type of fittings that are used to change the size of a pipe in a system. Although the Reducing flange fittings are known to be suitable for changing the line size, these flanges ideally should not be used if the application frequently shows signs of an abrupt transition. An abrupt transition would create unwanted turbulence, as at pump connections. A Carbon steel reducing flange consists of a flange with one specified diameter that has a bore of a different and smaller, diameter. With the exception of the bore and hub dimensions, these flanges will have dimensions of the larger pipe size. Applications for the stainless steel reducing flange involve being used in industries such as oil field, off-shore and water system, shipbuilding, power plants and in industrial vessels.
Table of Content
Cast Iron Reducing Flange Manufacturer
Coating/Surface TreatmentOil Black Paint, Yellow Transparent, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized.
Size | 1/2″ (15 NB) to 48″ (1200NB) |
Flange Face Type Manufacturer | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
Pressure Ratings | PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Dimensions and Pressure Ratings | Table D, E, F, & H, ANSI, BS4504, MSS- SP-44, BS3293, PN6, 10, 16, 25, 64 BS10, DIN Standards |
Standards | ANSI B16.47 Series A & B, ANSI B16.5, MSS SP44, ASA, API-605, AWWA, Custom Drawings. |
Pressure class | 150#, 300#, 600#, 1500# |
Test | Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector |
---|
Reducing Threaded Flange
Reducing Socket Weld Flange
Reducing Filler Flange
Weld Neck Reducing Flange
Socket Weld Reducing Flange
Slip On Reducing Flange
Class 150 Reducing Flange
Din Reducing Flange
Jis Reducing Flange
Asme B16.5 Reducing Flange
Asme 16.5 Reducing Flange
Ss Reducing Flange
Brass Reducing Flange
B16.47 Reducing Flange
Brass Reducing Companion Flange
Ductile Iron Reducing Flange
ASME B16.5 Reducing Flange Price in India | Class 150 Reducing Flange Price in INR | Reducing Flange Price in USD | ASME B16.5 Reducing Flange Price in UAE Dirham |
FLANGES ) REDUCING WNRT J FLANGE 2X1 SCH40S 300#SS316 MOC:ASTM A182 F316 ASME B16.5 Per Unit | Rs. 5,599 | US $75.33 | UAE Dirham 276.67 |
NPS (Inches) |
DN (mm) |
FLANGE OD A MM |
FLANGE THICKNESS D MM |
SLIP ON FLANGE WEIGHT (KGS) | WELD NECK FLANGE WEIGHT (KGS) | BLIND FLANGE WEIGHT (KGS) |
1/ 2 | 15 | 88.9 | 11.2 | 0.4 | 0.5 | 0.4 |
3/ 4 | 20 | 98.6 | 12.7 | 0.6 | 0.7 | 0.6 |
1 | 25 | 108 | 14.2 | 0.8 | 1 | 0.9 |
1 1/ 4 | 32 | 117.3 | 15.7 | 1 | 1.3 | 1.2 |
1 1/ 2 | 40 | 127 | 17.5 | 1.3 | 1.7 | 1.5 |
2 | 50 | 152.4 | 19.1 | 2.1 | 2.6 | 2.4 |
2 1/ 2 | 65 | 177.8 | 22.4 | 3.3 | 4.1 | 3.9 |
3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
3 1/ 2 | 90 | 215.9 | 23.9 | 4.8 | 6.1 | 6.2 |
4 | 100 | 228.6 | 23.9 | 5.3 | 6.8 | 7.0 |
5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
6 | 150 | 279.4 | 25.4 | 7.5 | 10.6 | 11.3 |
8 | 200 | 342.9 | 28.4 | 12.1 | 17.6 | 19.6 |
10 | 250 | 406.4 | 30.2 | 16.5 | 24 | 28.6 |
12 | 300 | 482.6 | 31.8 | 26.2 | 36.5 | 43.2 |
14 | 350 | 533.4 | 35.1 | 34.6 | 48.4 | 58.1 |
16 | 400 | 596.9 | 36.6 | 44.8 | 60.6 | 76.1 |
18 | 450 | 635 | 39.6 | 48.9 | 68.3 | 93.7 |
20 | 500 | 698.5 | 42.9 | 61.9 | 84.5 | 122.0 |
24 | 600 | 812.8 | 47.8 | 86.9 | 115 | 185.0 |
Nominal Size | Type | Ø A | D | Liner Thickness |
|
DN1 | DN2 | ||||
In. | In. | mm | mm | mm | |
3/4″ | 1/2″ | 1 | 98.5 | 30 | 5.0 |
1″ | 1/2″ | 1 | 108 | 30 | 5.0 |
1″ | 3/4″ | 1 | 108 | 30 | 5.0 |
1.1/2″ | 1/2″ | 1 | 127 | 30 | 5.0 |
1.1/2″ | 3/4″ | 1 | 127 | 30 | 5.0 |
1.1/2″ | 1″ | 1 | 127 | 30 | 5.0 |
2″ | 1/2″ | 3 | 152 | 30 | 5.0 |
2″ | 3/4″ | 2 | 152 | 30 | 5.0 |
2″ | 1″ | 2 | 152 | 30 | 5.0 |
2″ | 1.1/2″ | 1 | 152 | 30 | 5.0 |
3″ | 3/4″ | 3 | 190.5 | 35 | 5.0 |
3″ | 1″ | 3 | 190.5 | 35 | 5.0 |
3″ | 1.1/2″ | 2 | 190.5 | 35 | 5.0 |
3″ | 2″ | 1 | 190.5 | 35 | 5.0 |
4″ | 3/4″ | 3 | 228.6 | 35 | 5.0 |
4″ | 1″ | 3 | 228.6 | 35 | 5.0 |
4″ | 1.1/2″ | 3 | 228.6 | 35 | 5.0 |
4″ | 2″ | 3 | 228.6 | 35 | 5.0 |
4″ | 3″ | 2 | 228.6 | 35 | 5.0 |
6″ | 3/4″ | 3 | 280 | 40 | 5.0 |
6″ | 1″ | 3 | 280 | 40 | 5.0 |
6″ | 1.1/2″ | 3 | 280 | 40 | 5.0 |
6″ | 2″ | 3 | 280 | 40 | 5.0 |
6″ | 3″ | 3 | 280 | 40 | 5.0 |
6″ | 4″ | 2 | 280 | 40 | 5.0 |
8″ | 1″ | 3 | 343 | 35 | 5.0 |
8″ | 1.1/2″ | 3 | 343 | 35 | 5.0 |
8″ | 2″ | 3 | 343 | 40 | 5.0 |
8″ | 3″ | 3 | 343 | 40 | 5.0 |
8″ | 4″ | 3 | 343 | 40 | 5.0 |
8″ | 6″ | 2 | 343 | 40 | 5.0 |
10″ | 1″ | 3 | 406 | 35 | 2.5 |
10″ | 1.1/2″ | 3 | 406 | 35 | 2.5 |
10″ | 2″ | 3 | 406 | 35 | 2.5 |
10″ | 3″ | 3 | 406 | 35 | 2.5 |
10″ | 4″ | 3 | 406 | 35 | 2.5 |
10″ | 6″ | 3 | 406 | 35 | 2.5 |
10″ | 8″ | 2 | 406 | 35 | 3.5 |
12″ | 1″ | 3 | 483 | 35 | 3.5 |
12″ | 1.1/2″ | 3 | 483 | 35 | 3.5 |
12″ | 2″ | 3 | 483 | 35 | 3.5 |
12″ | 3″ | 3 | 483 | 35 | 3.5 |
12″ | 4″ | 3 | 483 | 35 | 3.5 |
12″ | 6″ | 3 | 483 | 35 | 3.5 |
12″ | 8″ | 3 | 483 | 35 | 3.5 |
12″ | 10″ | 2 | 483 | 35 | 3.5 |
14″ | 12″ | 1 | 533 | 40 | 3.5 |
16″ | 12″ | 3 | 597 | 40 | 3.5 |
16″ | 14″ | 2 | 597 | 35 | 3.5 |
Stainless Steel | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Brass | 3602 / 2604 / H59 / H62 / etc. |
Monel | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Titanium | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Alloy Steel | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Carbon Steel | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Copper Nickel | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Copper | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Inconel | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 |
Incoloy | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
Super Duplex | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Hastelloy | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Aluminium | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Alloy 20 | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Duplex | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
254 Smo | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
Nickel | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Other material | Tin bronze, Alumunum bronze, Lead bronze |
Nimonic | Nimonic 75, Nimonic 80A, Nimonic 90 |
NPS | DIAMETER | THICKNESS | DIA. | WELDING | MIN. | MIN. | MIN. | NECK | WELDING | JOINT | |||
DN | O | T | A | B | C | D | E | F | G | H | |||
1/2 | 5.25 | 1.19 | 1.38 | 0.88 | .90 | 0.93 | 2.88 | 1.56 | 1.56 | ||||
15 |
133 | 30.5 | 34.9 | 22.2 | 22.9 | 23.5 | 73.0 | 40 | 40 | ||||
3/4 | 5.50 | 1.25 | 1.69 | 1.09 | 1.11 | 1.14 | 3.12 | 1.69 | 1.69 | ||||
20 |
140 | 32.0 | 42.9 | 27.8 | 28.2 | 29.0 | 79.4 | 43 | 43 | ||||
1 | 6.25 | 1.38 | 2.00 | 1.36 | 1.38 | 1.41 | 3.50 | 1.88 | 1.88 | ||||
25 |
159 | 35.0 | 50.8 | 34.5 | 34.9 | 36.0 | 88.9 | 48 | 48 | ||||
1 1/4 | 7.25 | 1.50 | 2.50 | 1.70 | 1.72 | 1.75 | 3.75 | 2.06 | 2.06 | ||||
32 |
184 | 38.5 | 63.5 | 43.3 | 43.7 | 44.5 | 95.2 | 52 | 52 | ||||
1 1/2 | 8.00 | 1.75 | 2.88 | 1.95 | 1.97 | 1.99 | 4.38 | 2.38 | 2.38 | ||||
40 |
203 | 44.5 | 73.0 | 49.6 | 50.0 | 50.5 | 111.4 | 60 | 60 | ||||
2 | 9.25 | 2.00 | 3.62 | To be | 2.44 | 2.46 | 2.50 | 5.00 | 2.75 | 2.75 | |||
50 |
235 | 51.0 | 92.1 | 61.9 | 62.5 | 63.5 | 127.0 | 70 | 70 | ||||
2 1/2 | 10.50 | 2.25 | 4.12 | specified | 2.94 | 2.97 | 3.00 | 5.62 | 3.12 | 3.12 | |||
65 |
267 | 57.5 | 104.8 | 74.6 | 75.4 | 76 | 142.9 | 79 | 79 | ||||
3 | 12.00 | 2.62 | 5.00 | by | 3.57 | 3.60 | 3.63 | 6.62 | 3.62 | 3.62 | |||
80 |
305 | 67.0 | 127.0 | 90.7 | 91.4 | 92 | 168.2 | 92 | 92 | ||||
4 | 14.00 | 3.00 | 6.19 | purchaser | 4.57 | 4.60 | 4.63 | 7.50 | 4.25 | 4.25 | |||
100 |
356 | 76.5 | 157.2 | 116.1 | 116.8 | 118 | 190.5 | 108 | 108 | ||||
5 | 16.50 | 3.62 | 7.31 | 5.66 | 5.69 | 5.69 | 9.00 | 5.12 | 5.12 | ||||
125 |
419 | 92.5 | 185.7 | 143.7 | 144.5 | 145 | 228.6 | 130 | 130 | ||||
6 | 19.00 | 4.25 | 8.50 | 6.72 | 6.75 | 6.75 | 10.75 | 6.0 | 6.0 | ||||
150 |
483 | 108.0 | 215.9 | 170.7 | 171.4 | 171 | 273.0 | 152 | 152 | ||||
8 | 21.75 | 5.00 | 10.62 | 8.72 | 8.75 | 8.75 | 12.50 | 7.0 | 7.0 | ||||
200 |
552 | 127.0 | 269.9 | 221.5 | 222.2 | 222 | 317.5 | 178 | 178 | ||||
10 | 26.50 | 6.50 | 12.75 | 10.88 | 10.92 | 10.88 | 16.50 | 9.0 | 9.0 | ||||
250 |
675 | 165.5 | 323.8 | 276.2 | 277.4 | 276 | 419.4 | 229 | 229 | ||||
12 | 30.00 | 7.25 | 15.00 | 12.88 | 12.92 | 12.94 | 18.25 | 10.0 | 10.0 | ||||
300 |
760 | 184.5 | 381.0 | 327.0 | 328.2 | 329 | 463.6 | 254 | 254 |
Flanges pressure rating in psig for Reducing Flange ASME |
|||||||
Temperature (F°) | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
-20 to 100 | 285 | 740 | 985 | 1480 | 2220 | 3705 | 6170 |
200 | 260 | 680 | 905 | 1360 | 2035 | 3395 | 5655 |
300 | 230 | 655 | 870 | 1310 | 1965 | 3270 | 5450 |
400 | 200 | 635 | 845 | 1265 | 1900 | 3170 | 5280 |
500 | 170 | 605 | 805 | 1205 | 1810 | 3015 | 5025 |
600 | 140 | 570 | 755 | 1135 | 1705 | 2840 | 4730 |
650 | 125 | 550 | 730 | 1100 | 1650 | 2745 | 4575 |
700 | 110 | 530 | 710 | 1060 | 1590 | 2655 | 4425 |
750 | 95 | 505 | 675 | 1015 | 1520 | 2535 | 4230 |
800 | 80 | 410 | 550 | 825 | 1235 | 2055 | 3430 |
850 | 65 | 320 | 425 | 640 | 955 | 1595 | 2655 |
900 | 50 | 230 | 305 | 460 | 690 | 1150 | 1915 |
950 | 35 | 135 | 185 | 275 | 410 | 685 | 1145 |
1000 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |