Ring Type Joint Flanges RTJ Flanges Manufacturer In India

ANSI b16.5 Ring type joint flange

Ring type joint flange connection, slip on flange ring type joint manufacturer in India

Exporter of stainless steel rtj flanges, Weld neck ring type joint flange in Singapore, Nigeria

ANSI B16.5 Ring type joint Flanges

ANSI B16.5 Ring type joint Flanges

Stainless steel Ring type joint Flanges

Stainless steel Ring type joint Flanges

Carbon steel Ring type joint Flanges

Carbon steel Ring type joint Flanges

Ring joint flange have grooves cut into their faces which accept steel Ring Gaskets. RTJ flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming the gasket to make Intimate Contact inside the grooves, creating a metal to metal seal.

A ring type joint flange may have a raised face with a ring groove machined into it. For ring type joint weld neck flange that seal with BX ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the compressed gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension.

An ASME ring type joint flange may have a raised face with a ring groove machined into it. For RTJ flanges that seal with BX ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the already coined gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension. Ring type joint flange specification says an RTJ flange may have a raised face with a ring groove machined into it.

Ring type joint flange dimensions are 1/2” to 60 inches, DN 12mm to DN 1500mm. Ring type joint flange pressure rating includes Class 150 to Class 2,500, PN 2.5 to PN 250. An slip on flange ring type joint usually has a raised face with the groove machined into the face of the flange.

ring type joint flange connection are used for high pressure applications up to pressures as high as 15,000 psi (103 MPa). The ring type joint blind flange usually come in blind, slip-on, threaded and weld neck.

The benefits of using an rtj flange ring type joint flange and ring is that the gasket is confined to a groove and has two sealing surfaces. It also is self-actuating meaning that the sealing pressure increases when the process pressure increases.

Ring Type Joint Flanges Specification

Product Type Ring Type Joint Flanges / RTJ Flanges
Size Range From 1/2″ to 84″.
Pressure Class Ratings from 150lbs to 2,500lbs.
Standards ANSI, MSS, API, AWWA, DIN, JIS, BS and GB. ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN

ASME/ ANSI B16.5 Ring Type Joint Flanges Manufacturing Materials :

Dimensions Base Material Pressure Rating
ASME B16.5 ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
API 605 ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
ASME B16.47series A & B ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
EN1092-1 ASTM A182 (Forgings) PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. PN250. PN320. PN400.
BS4504 BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160.
BS10 BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings)

 

Typical Stainless Steel 18/8 Grade Designations:

ASTM
BS
DIN
EURONORM
304
304S15
X5 Cr Ni 18 10
1.4301
304L
304S11
X2 Cr Ni 18 9
1.4307
316
316S31
X5 Cr Ni Mo 17 12 2
1.4401
316L
316S11
X2 Cr Ni Mo 17 13 2
1.4404
321
321S31
X6 Cr Ni 18 10
1.4541
316Ti
320S31
X6 Cr Ni Mo Ti 17 12 2
1.4571
SMO
254SMO
X1 Cr Ni Mo Cu N 20 18 7
1.4547

Types of Ring type joint Flanges

Stainless Steel Ring type joint Flanges Dimensions

  • Stainless Steel Class 150 Ring type joint Flanges
  • Stainless Steel Class 300 Ring type joint Flanges
  • Stainless Steel Class 600 Ring type joint Flanges
  • Stainless Steel Class 900 Ring type joint Flanges
  • Stainless Steel Class 1500 Ring type joint Flanges
  • Stainless Steel Class 2500 Ring type joint Flanges

ANSI ASME B16.5 Ring type joint Flanges Dimensions

  • ANSI ASME B16.5 Class 150 Ring type joint Flangess
  • ANSI ASME B16.5 Class 300 Ring type joint Flangess
  • ANSI ASME B16.5 Class 400 Ring type joint Flangess
  • ANSI ASME B16.5 Class 600 Ring type joint Flangess
  • ANSI ASME B16.5 Class 900 Ring type joint Flangess
  • ANSI ASME B16.5 Class 1500 Ring type joint Flangess
  • ANSI ASME B16.5 Class 2500 Ring type joint Flangess
Carbon Steel Ring type joint Flanges Dimensions

  • Carbon Steel Class 150 Ring type joint Flanges
  • Carbon Steel Class 300 Ring type joint Flanges
  • Carbon Steel Class 600 Ring type joint Flanges
  • Carbon Steel Class 900 Ring type joint Flanges
  • Carbon Steel Class 1500 Ring type joint Flanges
  • Carbon Steel Class 2500 Ring type joint Flanges
Class 150 Ring type joint Flanges Dimensions

  • 30 class 150 Ring type joint Flanges
  • class 150 spectacle High Hub Blinds
  • 42 class 150 Ring type joint Flanges
  • ansi class 150 Ring type joint Flanges
  • 24 class 150 Ring type joint Flanges
  • ANSI b16.5 class 150 Ring type joint Flangess
  • ASME b16.5 class 150 Ring type joint Flanges

ANSI B16.5 Ring Type Joint Flanges Dimensions & Weight Chart:

 ANSI B16.5 Ring Type Joint Flanges Dimensions

Class150

NPS

GrooveNo.

PitchDia

P

DepthE

Note (1)

WidthF

Radiusat bottom

R

R11
34.14
5.54
7.14
0.8
R12
39.67
6.35
8.74
0.8
R13
42.88
6.35
8.74
0.8
R14
44.45
6.35
8.74
0.8
1
R15
47.63
6.35
8.74
0.8
R16
50.8
6.35
8.74
0.8
R17
57.15
6.35
8.74
0.8
R18
60.33
6.35
8.74
0.8
R19
65.07
6.35
8.74
0.8
R20
68.27
6.35
8.74
0.8
R21
72.23
7.92
11.91
0.8
2
R22
82.55
6.35
8.74
0.8
R23
82.55
7.92
11.91
0.8
R24
95.25
7.92
11.91
0.8
R25
101.6
6.35
8.74
0.8
R26
101.6
7.92
11.91
0.8
R27
107.95
7.92
11.91
0.8
R28
111.13
9.53
13.49
1.5
3
R29
114.3
6.35
8.74
0.8
R30
117.48
7.92
11.91
0.8
R31
123.83
7.92
11.91
0.8
R32
127
9.53
13.49
1.5
R33
131.78
6.35
8.74
0.8
R34
131.78
7.92
11.91
0.8
R35
136.53
7.92
11.91
0.8
4
R36
149.23
6.35
8.74
0.8
R37
149.23
7.92
11.91
0.8
R38
157.18
11.13
16.66
1.5
R39
161.93
7.92
11.91
0.8
5
R40
171.45
6.35
8.74
0.8
R41
180.98
7.92
11.91
0.8
R42
190.5
12.7
19.84
1.5
6
R43
193.68
6.35
8.74
0.8
R44
193.68
7.92
11.91
0.8

 

Class150

NPS

GrooveNo.

PitchDia

P

DepthE

Note (1)

WidthF

Radiusat bottom

R

R45
211.12
7.92
11.91
0.8
R46
211.14
9.53
13.49
1.5
R47
228.6
12.7
19.84
1.5
8
R48
247.65
6.35
8.74
0.8
R49
269.88
7.92
11.91
0.8
R50
269.88
11.13
16.66
1.5
R51
279.4
14.27
23.01
1.5
10
R52
304.8
6.35
8.74
0.8
R53
323.85
7.92
11.91
0.8
R54
323.85
11.13
16.66
1.5
R55
342.9
17.48
30.18
2.4
12
R56
381
6.35
8.74
0.8
R57
381
7.92
11.91
0.8
R58
381
14.27
23.01
1.5
14
R59
396.88
6.35
8.74
0.8
R60
406.4
17.48
33.32
2.4
R61
419.1
7.92
11.91
0.8
R62
419.1
11.13
16.66
1.5
R63
419.1
15.88
26.97
2.4
16
R64
454.03
6.35
8.74
0.8
R65
469.9
7.92
11.91
0.8
R66
469.9
11.13
16.66
1.5
R67
469.9
17.48
30.18
2.4
18
R68
517.53
6.35
8.74
0.8
R69
533.4
7.92
11.91
0.8
R70
533.4
12.7
19.84
1.5
R71
533.4
17.48
30.18
2.4
20
R72
558.8
6.35
8.74
0.8
R73
584.2
9.53
13.49
1.5
R74
584.2
12.7
19.84
1.5
R75
584.2
17.48
33.32
2.4
24
R76
673.1
6.35
8.74
0.8
R77
692.15
11.13
16.66
1.5
R78
692.15
15.88
26.97
2.4
R79
692.15
20.62
36.53
2.4

Class150

NPS

GrooveNo.

PitchDia

P

DepthE

Note (1)

WidthF

Radiusat bottom

R

NOTES:

(1) The height of the raised portion is equal to the depth of the groove dimension, E, but is not subjected to the tolerances for E. Former full-face contour may be used.

(2) For ring joints with lapped flanges in Classes 300 and 600, ring and groove number R30 is used instead of R31.

 

Manufacturing standard

ANSI, JIS, DIN, EN, BS4504, GOST etc.

Face

Raised Face (RF), Flat Face(FF), Ring-Type Joint (RTJ),Tongue-and-Groove (T&G), Male-and-Female (M&F)

Surface treatment

Anti Rust Oil, Black Paint Coating, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized, etc.

Pressure:
America Series: Class 150, Class 300, Class 600, Class 900A, Class 1500, Class 2500.
Europe Series: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400.
Flange Material Carbon steel  ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH
P250GH, P280GHM 16MN, 20MN ,20#
Stainless steel  ASTM A182, F304/304L, F316/316L
Alloy steel ASTM A182 A182 F12, F11, F22, F5, F9, F91etc.
Flange Standard                       ANSI Class 150 Flanges-Class 2500 Flanges
DIN 6Bar 10Bar 16Bar 25Bar 40Bar
JIS 5K Flanges-20K Flanges
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar

Stainless Steel and Carbon Steel Ring type joint flanges Price List in India

Types of Ring type joint flanges Price Unit
stainless steel Ring type joint flanges class 150 $22.45 NOS
stainless steel Ring type joint flanges class 300 $25.39 NOS
stainless steel Ring type joint flanges class 600 $31.19 NOS
carbon steel Ring type joint flanges class 150 $75.89 NOS
carbon steel Ring type joint flanges class 300 $88.12 NOS
carbon steel Ring type joint flanges class 600 $99.52 NOS
Ring type joint flanges ansi b16 5 class 150 $75.56 NOS
Ring type joint flanges ansi b16 5 class 300 $95.56 NOS

Available material and grades in Ring type joint flangess

  • 304 stainless steel Ring type joint flanges manufacturer
  • 304l stainless steel Ring type joint flanges manufacturer
  • 304h stainless Ring type joint flanges manufacturer
  • 316 stainless spectacle Ring type joint flanges manufacturer
  • 317 stainless steel Ring type joint flanges manufacturer
  • 321 stainless steel Ring type joint flanges manufacturer
  • Stainless 300lb Ring type joint flanges manufacturer
  • Stainless steel 900lb Ring type joint flanges manufacturer
  • Stainless 2500lb Ring type joint flanges manufacturer
  • Stainless 600lb Ring type joint flanges manufacturer
  • Stainless 2500lb Ring type joint flanges manufacturer
  • Stainless Steel Ring type joint flanges manufacturer
  • Stainless spectacle Ring type joint flanges manufacturer
  • Class 150 stainless Ring type joint flanges manufacturer
  • Class 300 stainless Ring type joint flanges manufacturer
  • Stainless 316 High Hub Blinds Flange manufacturer
  • Stainless Steel 321 class 150 Ring type joint flanges manufacturer
  • Stainless Steel 316l Ring type joint flanges manufacturer
  • Stainless 304l Ring type joint flanges manufacturer
  • Stainless 900lb Ring type joint flanges manufacturer
  • Stainless 304h Ring type joint flanges manufacturer
  • Stainless 317 Ring type joint flanges manufacturer
  • Stainless 316h Ring type joint flanges manufacturer
  • stainless Ring type joint High Hub Blinds
  • stainless Ring type joint flanges
  • Ring type joint flanges stainless
  • 304 stainless spectacle flange
  • 316 stainless Ring type joint flanges
  • 317 stainless Ring type joint flanges
  • stainless 321 Ring type joint flanges
  • stainless 316l Ring type joint flanges
  • 304 stainless spectacle flange
  • 316 stainless Ring type joint Ring type joint flanges
  • 317 stainless rtj Ring type joint flanges
  • stainless 321 plate Ring type joint flanges
  • stainless 321h Ring type joint flanges
  • ASTM A105 carbon steel High Hub Blinds manufacturer
  • ASTM A350 carbon High Hub Blinds manufacturer
  • ASTM A182 lf2 carbon Ring type joint flanges manufacturer
  • ASTM A694 F42 carbon Ring type joint flanges manufacturer
  • ASTM A694 F46 carbon Ring type joint flanges manufacturer
  • ASTM A694 F52 carbon Ring type joint flanges manufacturer
  • ASTM A694 F60 carbon steel Ring type joint flanges manufacturer
  • ASTM A694 F65 carbon Ring type joint flanges manufacturer
  • ASTM A694 F70 carbon Ring type joint flanges manufacturer
  • 321h Stainless steel 900lb Ring type joint flanges manufacturer
  • 317 Stainless 1500lb High Hub Blinds manufacturer
  • Carbon steel High Hub Blinds manufacturer
  • Carbon steel High Hub Blinds manufacturer
  • A105 carbon steel High Hub Blinds manufacturer
  • A350 carbon steel High Hub Blinds manufacturer
  • A182 lf2 carbon steel High Hub Blinds manufacturer
  • A694 F42 carbon steel High Hub Blinds manufacturer
  • A694 F46 carbon High Hub Blinds manufacturer
  • A694 F52 carbon Ring type joint flanges manufacturer
  • A694 F60 carbon Ring type joint flanges manufacturer
  • A694 F65 carbon Ring type joint flanges manufacturer
  • A694 F70 carbon steel spectacle flange manufacturer
  • carbon steel 300lb Ring type joint flanges manufacturer
  • carbon 900lb Ring type joint flanges manufacturer
  • carbon steel 2500lb Ring type joint flanges manufacturer
  • carbon 600lb Ring type joint flanges manufacturer
  • carbon 2500lb Ring type joint flanges manufacturer
  • carbon Ring type joint Ring type joint flanges
  • carbon Ring type joint flanges
  • High Hub Blinds carbon flange
  • rtj carbon Ring type joint flanges
  • spectacle carbon Ring type joint flanges
  • Ring type joint carbon Ring type joint flanges
  • carbon a105n Ring type joint flanges
  • carbon a105 Ring type joint flanges

We are exporting Ring type joint flanges in following countries

MIDDLE EAST
Saudi Arabia
Kuwait
Jordan
Turkey
Iran
Iraq
Bahrain
Oman
Uae
Qatar
Yemen
Syria
AFRICA

Nigeria
Sudan
Algeria
Angola
Egypt
Equatorial Guinea
South Africa
Libya
The Republic Of Congo
Gabon

NORTH AMERICA

Jamaica
Costa Rica
Puerto Rica
Usa
Canada
Bahamas
Denmark
Mexico
Trinidad And Tobago

EUROPE

Russia
Uk
Norway
Spain
Portugal
Ireland
Croatia
Slovenia
Belgium
Hungary
Albania
Austria
Switzerland
Slovakia
Netherland
Greece
Czech Republic
Germany
France
Italy
Malta

ASIA

Japan
Sri Lanka
Maldives
Singapore
Malaysia
South Korea
Indonesia
India
Thailand
Vietnam
Mayanmar
Taiwan
Cambodia

SOUTH AMERICA

Brazil
Chile
Argentina
Bolivia
Ecuador
Paraguay
Venezuela
Colombia
Uruguay

ASTM A182 Stainless Steel Ring Type Joint Flange, rtj flange ring type joint flange supplier in India

Ready stock of ASME ring type joint flange, Ring type joint blind flange as per customer requirement
Check ring type joint flange dimensions, standards and price list

Comments are closed.