ANSI b16.5 Stainless Steel Socket Weld Flange
Manufacturer of ASME b16.5 SWRF Flange, carbon steel socket weld flange
SS socket weld flange, ASME B16.5 Class 150 Socket weld Flanges exporter in Kuwait, Qatar
ANSI B16.5 Socket Weld Flanges
Stainless steel Socket Weld Flanges
Carbon steel Socket Weld Flanges
Table Of Content
An ANSI socket weld flange is very similar in appearance to a Slip-On flange. The back side of this center opening is then counter bored to form the appropriate size socket to take the pipe outside diameter. steel socket weld flanges are available in pressure from 150# and up and pipe schedule 40 to schedule 160. When it comes to specifying the pipe schedule, it ensures that ID of the SW Flange matches the ID of pipe for smooth fluid flow.
In socket weld blind flange, the diameter of the smaller bore is the same as the inner diameter of the matching pipe. socket weld flange class 150 are primarily used to make flanged joints where required in small sizes in socket welded pipe specs.
The negative of this socket weld companion flange is that it can be more expensive than a slip-on due to more intricate machining, and they can be less readily available than slip-ons due to the fact that the bottom half of the inside diameter must be made to the same schedule as the pipe that is being used.
These socket weld RTJ flanges were initially developed for use on smaller sizes of pipe at higher pressure ratings. They are more used on lower pressure temperature as well today. DINESH INDUSTRIES offers these socket weld raised face flange in stainless and alloy material.
Ring joint socket weld flange contains a shoulder inside the flange that acts as a guide to set the depth at which the pipe is welded to the flange. They are fabricated by inserting the pipe end into the flange until it bottoms out against the shoulder, followed by retracting the pipe 1/8 inches before welding it in place. Aside from the fact that this practice was originally employed to reduce cracking due to thermal stresses in stainless steel superheaters, but over the years has become standard practice for the installation of all socket weld reducing flange.
Socket weld flange specifications
| Product Type | Socket Weld Flanges, SW forged Flange, Socket welding Flanges, ASME 16.5 Socket Weld Flanges / SWRF Flanges |
|---|---|
| Size | ½” (15 NB) to 48″ (1200NB) |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
| Stainless Steel Socket Weld Flanges | ASTM A182 F202 stainless steel, A240 F304 stainless steel, 304L stainless steel, 304H stainless steel, 316 stainless steel, 316L stainless steel, 316Ti stainless steel, 316LN stainless steel, 310S stainless steel, 317L stainless steel, 321 stainless steel, 410 stainless steel, 420 stainless steel, 440C stainless steel, 202 stainless steel, F904L stainless steel |
| Carbon Steel Socket Weld Flanges | ASTM A105 Carbon, ASME SA105 Carbon, ASTM A350 Carbon, ASME A350 Carbon, ASTM A181 carbon, A516 gr 70 carbon, A694 F42 carbon, A694 F46 carbon, A694 F52 carbon, A694 F60 carbon, A694 F65 carbon |
| Alloy Steel Socket Weld Flanges | ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 |
| Duplex Steel Socket Weld Flanges | ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 |
| Specialize | As per drawing |
| Standard | ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673B.S : BS4504 , BS4504, BS1560, BS10 |
| Connection Type / Flange Face Type | Ring Type Joint, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove |
Socket weld flange standard
- ASTM A182 – ASME SA182 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
- ASME B16.5– Pipe Flanges and Flanged Fittings’
- MSS SP-6 – Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings’
ANSI B16.5 socket weld flange material
| Dimensions | Base Material | Pressure Rating |
|---|---|---|
| ASME B16.5 | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| API 605 | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| ASME B16.47series A & B | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| EN1092-1 | ASTM A182 (Forgings) | PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. PN250. PN320. PN400. |
| BS4504 | BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) | PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. |
| BS10 | BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) |
Manufacturer of following types of socket weld flanges in India
ASTM A182 Stainless Steel F316 Socket Weld Flanges
ASTM A182 Stainless Steel F304L Socket Weld Flange
Stainless Steel Socket Weld Flange
Carbon Steel Socket Weld Flanges
Types of Socket weld Flanges
|
Stainless Steel Socket weld flanges Dimensions
|
ANSI ASME B16.5 Socket weld flanges Dimensions
|
Carbon Steel Socket weld flanges Dimensions
|
High Nickel Alloy Socket weld Flanges
|
ANSI B16.5 socket weld flange dimensions
150 lb socket weld flange dimensions
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore Socket Weld | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
|
1/2″
|
90
|
11.2
|
35.05
|
30
|
22.2
|
14
|
4
|
15.87
|
60.3
|
|
3/4″
|
100
|
12.7
|
42.92
|
38
|
27.7
|
14
|
4
|
15.87
|
69.9
|
|
1″
|
110
|
14.3
|
50.80
|
49
|
34.5
|
16
|
4
|
15.87
|
79.4
|
|
1 1/4″
|
115
|
15.9
|
63.50
|
59
|
43.2
|
19
|
4
|
15.87
|
88.9
|
|
1 1/2″
|
125
|
17.5
|
73.15
|
65
|
49.5
|
21
|
4
|
15.87
|
98.4
|
|
2″
|
150
|
19.1
|
91.94
|
78
|
61.9
|
24
|
4
|
19.05
|
120.7
|
|
2 1/2″
|
180
|
22.3
|
104.65
|
90
|
74.6
|
27
|
4
|
19.05
|
139.7
|
|
3″
|
190
|
23.9
|
127.00
|
108
|
90.7
|
29
|
4
|
19.05
|
152.4
|
300# socket weld flange dimensions
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore Socket Weld | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
|
1/2″
|
95
|
12.7
|
35.05
|
38
|
22.2
|
21
|
4
|
15.87
|
66.7
|
|
3/4″
|
115
|
14.3
|
42.92
|
48
|
27.7
|
24
|
4
|
19.05
|
82.6
|
|
1″
|
125
|
15.9
|
50.80
|
54
|
34.5
|
25
|
4
|
19.05
|
88.9
|
|
1 1/4″
|
135
|
17.5
|
63.50
|
64
|
43.2
|
25
|
4
|
19.05
|
98.4
|
|
1 1/2″
|
155
|
19.1
|
73.15
|
70
|
49.5
|
29
|
4
|
22.22
|
114.3
|
|
2″
|
165
|
20.7
|
91.94
|
84
|
61.9
|
32
|
8
|
19.05
|
127.0
|
|
2 1/2″
|
190
|
23.9
|
104.65
|
100
|
74.6
|
37
|
8
|
22.22
|
149.2
|
|
3″
|
210
|
27.0
|
127.00
|
117
|
90.7
|
41
|
8
|
22.22
|
168
|
600# socket weld flange dimensions
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore Socket Weld | >Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
|
1/2″
|
95
|
14.3
|
35.05
|
38
|
22.2
|
22
|
4
|
15.87
|
66.7
|
|
3/4″
|
115
|
15.9
|
42.92
|
48
|
27.7
|
25
|
4
|
19.05
|
82.6
|
|
1″
|
125
|
17.5
|
50.80
|
54
|
34.5
|
27
|
4
|
19.05
|
88.9
|
|
1 1/4″
|
135
|
20.7
|
63.50
|
64
|
43.2
|
29
|
4
|
19.05
|
98.4
|
|
1 1/2″
|
155
|
22.3
|
73.15
|
70
|
49.5
|
32
|
4
|
22.22
|
114.3
|
|
2″
|
165
|
25.4
|
91.94
|
84
|
61.9
|
37
|
8
|
19.05
|
127.0
|
|
2 1/2″
|
190
|
28.6
|
104.65
|
100
|
74.6
|
41
|
8
|
22.22
|
149.2
|
|
3″
|
210
|
31.8
|
127.00
|
117
|
90.7
|
46
|
8
|
22.22
|
168.3
|
|
Manufacturing standard |
ANSI, JIS, DIN, EN, BS4504, GOST etc. |
|
Face |
Raised Face (RF), Flat Face(FF), Ring-Type |
|
Surface treatment |
Anti Rust Oil, Black Paint Coating, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized, etc. |
America Series: Class 150, Class 300, Class 600, Class 900A, Class 1500, Class 2500.
Europe Series: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400.
| Flange Material | Carbon steel | ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH |
| P250GH, P280GHM 16MN, 20MN ,20# | ||
| Stainless steel | ASTM A182, F304/304L, F316/316L | |
| Alloy steel | ASTM A182 A182 F12, F11, F22, F5, F9, F91etc. | |
| Flange Standard |
ANSI | Class 150 Flanges-Class 2500 Flanges |
| DIN | 6Bar 10Bar 16Bar 25Bar 40Bar | |
| JIS | 5K Flanges-20K Flanges | |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar | |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Stainless Steel and Carbon Steel Socket weld Flange Price List in India
| Types of Socket weld flanges | Price | Unit |
|---|---|---|
| stainless steel Socket weld flanges class 150 | $22.45 | NOS |
| stainless steel Socket weld flanges class 300 | $25.39 | NOS |
| stainless steel Socket weld flanges class 600 | $31.19 | NOS |
| carbon steel Socket weld flanges class 150 | $75.89 | NOS |
| carbon steel Socket weld flanges class 300 | $88.12 | NOS |
| carbon steel Socket weld flanges class 600 | $99.52 | NOS |
| Socket weld flanges ansi b16 5 class 150 | $75.56 | NOS |
| Socket weld flanges ansi b16 5 class 300 | $95.56 | NOS |
Available material and grades in socket weld flanges
|
|
We have ready stock available in following countries
| MIDDLE EAST Saudi Arabia Kuwait Jordan Turkey Iran Iraq Bahrain Oman Uae Qatar Yemen Syria |
AFRICA
Nigeria NORTH AMERICA Jamaica |
EUROPE
Russia |
ASIA
Japan SOUTH AMERICA Brazil |
Flat face socket weld flange, Socket weld blind flange supplier at best price in India
Ready stock of ANSI b16.5 class 150 socket-weld flanges, Socket weld flange as per customer requirement
Check ASME b16.5 reducing flange dimensions, Raised face socket weld flange dimensions
Comments are closed.