ASTM A234 WP91 Pipe Fittings
Purchase NABL Tested ASME SA234 WP91 Cap, View WP 91 Alloy Steel Fittings Dimensions
ASTM A234 WP91 Pipe Fittings are weldable pipe fittings that are applied with pressure pipe systems at elevated temperatures and the material grad is denoted by the number 91. There are different material grades in the same standard and they all have different mechanical properties. Dinesh Industries is a large supplier of the fittings in this grade. Our ASTM A234 WP91 pipe fittings are used in applications that require high temperatures and high pressures such as the hydraulic systems, underwater pipes, petroleum refineries, oil and gas industries and applications in the food processing an power generation plants.
Manufacturer of A234 Grade WP91 Elbow, Check ASME SA234 WP91 Material Size Range
We supply the ASME SA234 WP91 pipe fittings in different types and sizes. There are tees, elbows, bends, reducers and crosses in the WP 91 alloy steel fittings. Each of them have unique functionalities. The WP91 elbow is used to turn the pipe direction. The elbows are usually at 45 degree, 90 degree or 180 degrees of angle. The WP91 reducer on the other hand reduces the diameter of the pipe. There are two types, the concentric and eccentric types. The WP 22 tee is a tri-junction of pipes that can come with different sizes or the same size to fit in various sizes of pipes. Our WP22 fittings are manufactured with high standards and you can contact us for any inquiries.
Table of Content
Specification List of ASTM A234 WP91 Pipe Fittings
| Specification | ASTM A234 / ASME SA234 |
| Dimensions | ASME B16.28, ASME/ANSI B16.9, MSS-SP-43 |
| Size | 1/2″ NB to 24″NB in. |
| Type | Welded / Seamless / Fabricated |
| Thickness | Sch XXS, Sch 5s, Sch 80s, Sch 10s, Sch 160s, Sch 40s |
| Surface Treatment | Hot galvanized, Rust-proof black oil, Transparent oil |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Pipe Fittings Forms | Swedge Nipple, Pipe Nipple, Reducers, Caps, Short Radius Elbow, 2D Elbow, Long Radius Elbow, Unequal Crosses, 3D Elbow, Reducing Nipple, Butt Tee Fittings, Bend, 5D Elbow, 10D Elbow, Equal Cross, Stub End, Pipe / Piggable Bend, Pipe Elbow |
The process of A234 WP91 pipe fittings manufacturing is called “wrought” which means it is casted or forged. Normally elbows, tees, reducers are manufactured from ASTM A234 WP91 Plates, But large sizes fittings are manufactured in pieces and welded together
Composition Chart Of ASME SA234 WP91 Buttweld Fittings
| Grade | C | Mn | Si | S | P | Cr | Mo |
| A234 WP91 | 0.05-0.2 | 0.3-0.8 | 0.5-1 | ≤0.030 | ≤0.030 | 1-1.5 | 0.44-0.65 |
Mechanical Characteristics Of ASME SA234 WP91 Fittings
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 WP91 | 415 – 585 | ≥205 | ≥20 |
Dimensions & Weight of ASTM A234 WP91 Fittings
Available Testing Facilities of WP 91 Alloy Steel Fittings
- Eddy current examining
- Hydrostatic analysis
- Small tests
- Large-scale test
- X-ray test
- Impact analysis
- Pitting protection test
- Firmness test
- Positive material recognition
- Prompt test
- Chemical examination-Spectro analysis