ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes. Dinesh Industries is a manufacturer and supplier of the ASTM A234 wpb fittings in different dimensions and grades. the pipes and fittings could be of carbon steel or alloy steels. Depending on the application requirement, the material grade and the dimensions change. We are leading Manufacturer A234 Grade WPB Reducer.
ASTM A234 WPB Pipe Fittings
ASTM A234 grade WPB Elbow
ASME SA234 WPB Reducer
There are different types of fittings that fit different purposes as well. Our ASME SA234 wpb elbow is used in pressure pipes under elevated temperatures to change the direction of the line. This is usually a 45 degree angle turn or a 90 degree angle turn. There are different types of elbows as well. We supply the A234 wpb tee which connects three pieces of pipes together. They could be equal in diameter and with the equal tee and different sizes fit into the unequal tee. Our SA234 wpb reducer components are used for reducing the diameter of the piping. There are different standards such as the A234 wpb end cap ASME b16.9 which determine the diameter range of the pipe fittings. We are biggest Manufacturer and Supplier of SA234 WPB Elbow. The source raw material for manufacturing ASTM A234 WPB steel pipe fittings may be from steel pipe, such as ASTM A106 Gr.B and C. It can also be manufactured from steel plate, as ASTM A516 Gr 70, ASTM A572, ASTM A285 Gr.C.
ASTM A234 Wpb Fittings Manufacturer
Table of Content
ASTM A234 WPB Fittings
size | CS ASTM A234 Seamless Butt Weld Fittings: 1/2″ – 10″ CS ASTM A234 gr WPB Welded Butt Weld Fittings: 1/2″ – 48″ |
---|---|
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Carbon Steel sch 40 A234 Fittings Manufacturer |
|
Type | DN15-DN1200 |
Connection | Welding |
Size Range | ½” NB to 120″ NB CS ASTM A234 Seamless Butt Weld Fittings: 1/2″ – 24″ CS ASTM A234 gr WPB Welded Butt Weld Fittings: 1/2″ – 120″ CS ASTM A234 Two Joint / Two Halve Fittings 6” to 48” |
SA234 Grade WPB fittings Manufacturer | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D . Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
Manufacturing process | Push, Press, Forge, Cast, etc. |
Surface treatment | Sand blasting, Sand Rolling, Sand Blasting |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Key markets and industries |
|
Application & Industrial Uses |
|
How To Order |
|
ASTM A234 WPB Fittings are used for the pressure piping systems of moderate and high temperature services. It covers steel fittings of seamless and welded types. A234 Gr WPB Fittings Manufacturer in Mumbai
A234 WPB Fittings Price Per Piece in India | ASTM A234 WPB Fittings Price in INR | ASTM A234 WPB Fittings Price in USD | ASTM A234 WPB Fittings Price in UAE Dirham |
CARBON STEEL SEAMLESS PIPE FITTING 90 ELBOW ASTM A234 WPB B16.9 SMLS SIZE 16 SCH20 | 5,224 | $71.38 | UAE Dirham 262.17 |
ASTM A234 GR. WPB B16.9 BW R=1.5D, SCH-40 Size: 50mm | 115 | $1.57 | UAE Dirham 5.77 |
ASTM A234 WPB 8 SCH. 40 90 DEG. LR ELBOWS | 59 | $0.81 | UAE Dirham 2.96 |
90 ELBOW ASTM A234 WPB B16.9 SMLS SIZE 16 SCH10 | 35 | $0.48 | UAE Dirham 1.76 |
90 ELBOW ASTM A234 WPB B16.9 SMLS SIZE 18 STD | 49 | $0.67 | UAE Dirham 2.46 |
ASTM A234 WPB 90 Degree LR Elbow, SCH 60, 16 Inch, Butt Weld
ASTM A234 gr WPB Cap
45 Degree LR Elbow, ASTM A234 WPB, 22 Inch, 0.375 Inch, BW
90D LR Elbow, A234 WPB, B16.9, DN200, SCH 40, BW Ends
ASTM A234 WPB Tee
A234 WPB Seamless Long Radius Elbow, 90 Degree, 2 Inch, SCH 40
ASTM A234 Gr Wpb End Cap
A234 WPB Material
A234 WPB Fittings
A234 WPB SMLS Elbow, 4 Inch, SCH 40, Long Radius
A234 WPB 90 Degree Elbow, Long Radius, 6 Inch, SCH 40, Black
Carbon Steel ASTM A234 Wpb 45 Elbow
A234 WPB Elbow
ASTM A234 WPB Concentric Reducer
ASTM A234 gr WPB Elbow
Welded 90D Elbow, 26 Inch, LR, ASTM A234 WPB
A234 Grade Wpb Eccentric Reducer
A234 WPB 90 Deg Elbow, 10 Inch, SCH 40, LR Elbow
ASTM A234 WPB pipe Fittings
Pipe Caps, ASTM A234 WPB, Butt Weld, ANSI B16.9
BW 90 Deg Elbow, ASTM A234 WPB, DN1200, WT Sch XS, LR, ASME B16.9
ASTM A234 WPB Fittings
ASTM A234 Gr Wpb-w Reducing Tee
A234 WPB 90D LR Elbow, ASME B16.9, 12 Inch, SCH 80, OD 300mm
ASTM A234 WPB Cap
Long Radius Elbow, 90 Degree, A234 WPB, 10 Inch, SCH 40, Seamless
90 Degree FBE Lined Elbow, ASTM A234 WPB, 8 Inch, SCH 40, B16.9
ASTM A234 WPB Reducer
45D & 90D Elbow, A234 WPB, 3 Inch, Butt Weld Ends
ASTM A234 Grade Wpb Short Radius Elbow
ASTM A234 WPB Elbow
3LPE Coated Elbow, ASTM A234 WPB, 10 Inch, SCH 40, B16.9, FEB Lined
Item | Tensile Strength (KSI) | Yield Strength (KSI) |
WPB | 60 | 35 |
Grade | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V | Nb |
WPB | 0.3 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
Pipe | Fittings | Flanges | Valves | Bolts & Nuts |
---|---|---|---|---|
A106 Gr A | A234 Gr WPA | A105 | A216 Gr WCB | A193 Gr B7 A194 Gr 2H |
A106 Gr B | A234 Gr WPB | A105 | A216 Gr WCB | |
A106 Gr C | A234 Gr WPC | A105 | A216 Gr WCB |
Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:
Carbon Steel A234 WPB Smls Pipe Fittings | Carbon Steel WPB Short Stub End |
---|---|
WPB Carbon Steel Fittings | A234 Carbon Steel Long Stub End |
A234 WPB Weld Fittings | Carbon Steel A234 Short Stub End |
ASTM A234 Gr WPB Fittings | A234 WPB Long Stub End |
A234 WPB Carbon Steel Fittings | ASTM A234 WPB Fittings |
ASTM A234 Carbon Steel Fittings | CS A234 Short Stub End |
ASTM A234 Reducer | A234 Long Stub End |
SA234 Grade WPB End Cap | Carbon Steel sch 40 A234 Short Stub End |
A234 WPB B16.9 Bend | ASTM A234 WPB Carbon Steel Long Stub End |
Grade WPB Short Stub End | A234 Gr WPB Long Stub End |
ASME SA A234 Grade WPB Seamless Fittings | A234 WPB Short Stub End |
A234 WPB Carbon Steel Buttweld Fittings | A234 WPB equal straight cross |
ASTM A234 WPB Sch 40 Pipe Fittings | CS ASTM A234 equal cross |
SA234 Grade WPB | CS ASTM A234 gr WPB equal welded cross |
ASTM A234 WPB steel pipe fittings | WPB Carbon Steel 4-way cross pipe fitting |
ERW A234 WPB Carbon Steel Fittings | ASTM A234 Carbon Steel B16.9 Cross |
Welded A234 WPB pipe fittings | CS ASTM A234 WPB butt welded equal cross b16.9 |
ASTM A234 WPB Material | Carbon Steel SA234 Grade WPB Fittings |
CS ASTM A234 WPB Fittings | ASTM A234 WPB B16.9 BW Fittings |
A234 WPB Carbon Steel Long Stub End | ASTM A234 Grade WPB Seamless Fittings |
CS A234 WPB Short Stub End | ASTM A234 WPB Seamless Pipe Fittings |
Carbon Steel ASTM A234 Long Stub End | ASTM A234 WPB Ansi B16.9 Buttweld Pipe Fittings |
ASTM A234 WPB Short Stub End | A234 WPB Welded Fittings |
SA234 Grade WPB Long Stub End | A234 WPB Smls |
A234 Steel Weld Fittings Manufacturer in India. We are supplying the SA 234 Gr WPB Fittings in various specifications so that we can meet the demand for various applications. Manufacturer of A234 WPB Material in Mumbai. View SA234 WPB Elbow Price List
Grade and Marking Symbol
|
WPB
|
WPC, WP11 CL1, WP12 CL2
|
WP1
|
WP11 CL1, WP22 CL1, WP5 CL1, WP9 CL1
|
WPR
|
WP11 CL3, WP22 CL3, WP2 CL3, WP9 CL3
|
WP91
|
WP911
|
WP12 CL1
|
Tensile strength, range Ksi [MPa]
|
60-95 [415-655] |
70-95 [485-655]
|
55-80 [380-550]
|
60-85 [415-585] |
63-88 [435-605]
|
75-100 [520-690]
|
85-110 [585-760]
|
90-120 [620-840]
|
60-85 [415-585]
|
Yield strength, min, Ksi [MPa] (0.2% offset or 0.5% extension- under-load)
|
35 [240]
|
40 [275]
|
30 [205]
|
30 [205]
|
46 [315]
|
45 [310]
|
60 [415]
|
64 [440]
|
32 [220]
|
WPB, WPC, WP11, WP22 |
WP91 | |||
---|---|---|---|---|
Longitundinal | Transverse | Longitundinal | Transverse | |
Standard round specimen, or small proportioanl specimen, min % in 4 D |
22 | 14 | 20 | 13 |
Rectangular speicmen for wall thickness 5/16″ and over, and for all small sizes tested in full section; min % in 2 in. |
30 | 20 A | ||
Rectangular speicimen for wall thickness less than 5/16″; min % in 2 in (1/2″ wide specimen) |
B | B |
Nom. Pipe Size | ASTM A234 WPB 90° Elbows | ASTM A234 WPB 45° Elbows | ASTM A234 WPB 180° Return Long Radius Elbow | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Long Radius | Short Radius | 3R | Long Radius | 3R | STD | XS | ||||||||
STD | XS | SCH. 160 | XXS | STD | XS | STD | XS | STD | XS | STD | XS | |||
½ | .18 | .25 | – | – | – | – | – | – | .09 | .19 | – | – | .35 | – |
¾ | .19 | .25 | – | – | – | – | – | – | .09 | .19 | – | – | .40 | .65 |
1 | .40 | .50 | .60 | .75 | .25 | – | – | – | 0.25 | .31 | – | – | .75 | 1.00 |
1¼ | .60 | .90 | 1.00 | 1.38 | .4 | – | – | – | 0.38 | .50 | – | – | 1.25 | 1.75 |
1½ | .90 | 1.15 | 1.80 | 1.50 | .56 | .75 | – | – | .40 | .69 | – | – | 1.88 | 2.39 |
2 | 1.60 | 2.20 | 3.25 | 3.50 | 1.00 | 1.50 | 3.00 | 4.00 | .81 | 1.19 | 1.5 | 2.1 | 3.23 | 4.40 |
2½ | 3.25 | 4.00 | 5.13 | 7.00 | 2.13 | 2.80 | 6.00 | 8.00 | 1.75 | 2.13 | 3.00 | 4.00 | 6.50 | 8.00 |
3 | 5.00 | 6.50 | 8.50 | 11.0 | 3.00 | 4.25 | 10.0 | 13.0 | 2.63 | 3.50 | 5.00 | 7.00 | 10.25 | 13.00 |
3½ | 6.75 | 8.35 | – | 16.0 | 4.50 | 6.00 | 13.0 | 18.0 | 3.50 | 4.50 | 7.00 | 9.00 | 13.00 | 16.75 |
4 | 9.00 | 13.5 | 18.0 | 20.0 | 6.25 | 8.50 | 18.0 | 25.0 | 4.50 | 6.10 | 9.00 | 13.0 | 18.5 | 25.0 |
5 | 15.0 | 22.0 | 32.0 | 36.0 | 9.60 | 14.0 | 29.0 | 43.0 | 7.50 | 10.7 | 15.0 | 22.0 | 30.0 | 44.0 |
6 | 24.5 | 35.0 | 57.0 | 65.0 | 18.0 | 23.0 | 45.0 | 70.0 | 12.0 | 17.5 | 23.0 | 35.0 | 50.0 | 70.0 |
8 | 50.0 | 71.0 | 120 | 118 | 34.0 | 47.5 | 90.0 | 140 | 23.0 | 35.0 | 45.0 | 70.0 | 95.0 | 142 |
10 | 88.0 | 107 | 260 | – | 58.0 | 70.0 | 159 | 218 | 43.0 | 53.0 | 80.0 | 109 | 117 | 215 |
12 | 125 | 160 | 450 | – | 80.0 | 104 | 233 | 310 | 62.0 | 84.0 | 117 | 155 | 230 | 320 |
14 | 160 | 205 | 572 | – | 105 | 140 | 298 | 400 | 80.0 | 100 | 149 | 200 | 325 | 400 |
16 | 206 | 276 | – | – | 132 | 174 | 390 | 520 | 100 | 135 | 195 | 260 | 412 | 550 |
18 | 260 | 340 | – | – | 167 | 219 | 495 | 660 | 126 | 167 | 248 | 330 | 510 | 690 |
20 | 320 | 420 | – | – | 210 | 275 | 610 | 810 | 160 | 206 | 305 | 405 | 640 | 830 |
22 | 394 | 520 | – | – | – | – | 735 | 980 | 197 | 260 | 368 | 490 | 787 | 1040 |
24 | 460 | 600 | – | – | 298 | 392 | 875 | 1170 | 238 | 300 | 438 | 585 | 890 | 1200 |
26 | 550 | 729 | – | – | – | – | 1030 | 1370 | 275 | 365 | 515 | 685 | – | – |
30 | 734 | 975 | – | – | – | – | 1370 | 1830 | 367 | 488 | 685 | 915 | – | – |
36 | 1062 | 1412 | – | – | – | – | 1970 | 2630 | 531 | 706 | 985 | 1315 | – | – |
We are Manufacturer of A234 Grade WPB Pipe Fittings in Various Types Such as eccentric reducers, Elbows, Tee, concentric reducers, Stub End. Dinesh Industries is Manufacturer & Supplier of A234 Gr WPB Material as per ASME B16.9 Standards.
Nominal Pipe Size |
Outside Diameter |
Inside Diameter |
Wall Thickness |
Center To End |
Pipe Schedule |
Weight Pounds |
1 | 1.32 | 1.05 | 0.133 | 1 | 40 | 0.25 |
1 1/4 | 1.66 | 1.38 | 0.14 | 1.25 | 40 | 0.39 |
1 1/2 | 1.9 | 1.61 | 0.145 | 1.5 | 40 | 0.53 |
2 | 2.38 | 2.07 | 0.154 | 2 | 40 | 0.97 |
2 1/2 | 2.88 | 2.47 | 0.203 | 2.5 | 40 | 2 |
3 | 3.5 | 3.07 | 0.216 | 3 | 40 | 3 |
3 1/2 | 4 | 3.55 | 0.226 | 3.5 | 40 | 4.3 |
4 | 4.5 | 4.03 | 0.237 | 4 | 40 | 6.1 |
5 | 5.56 | 5.05 | 0.258 | 5 | 40 | 9.7 |
6 | 6.63 | 6.07 | 0.28 | 6 | 40 | 16.7 |
8 | 8.63 | 7.98 | 0.322 | 8 | 40 | 32.4 |
10 | 10.75 | 10.02 | 0.365 | 10 | 40 | 56.3 |
12 | 12.75 | 12 | 0.375 | 12 | * | 79.4 |
14 | 14 | 13.25 | 0.375 | 14 | 30 | 104 |
16 | 16 | 15.25 | 0.375 | 16 | 30 | 129 |
18 | 18 | 17.25 | 0.375 | 18 | * | 163 |
20 | 20 | 19.25 | 0.375 | 20 | 20 | 210 |
24 | 24 | 23.25 | 0.375 | 24 | 20 | 297 |
30 | 30 | 29.25 | 0.375 | 30 | * | 480 |
36 | 36 | 35.25 | 0.375 | 36 | * | 692 |
42 | 42 | 41.25 | 0.375 | 42 | * | 967 |
48 | 48 | 47.25 | 0.375 | 48 | * | 1,340 |
Nominal Pipe Size |
Outside Diameter |
Inside Diameter |
Wall Thickness |
Center To End |
Pipe Schedule |
Weight Pounds |
1/2 | 0.84 | 0.622 | 0.109 | 1.5 | 40 | 0.16 |
3/4 | 1.05 | 0.824 | 0.113 | 1.5 | 40 | 0.17 |
1 | 1.32 | 1.049 | 0.133 | 1.5 | 40 | 0.4 |
1 1/4 | 1.66 | 1.38 | 0.14 | 1.88 | 40 | 0.55 |
1 1/2 | 1.9 | 1.61 | 0.145 | 2.25 | 40 | 0.8 |
2 | 2.38 | 2.07 | 0.154 | 3 | 40 | 1.6 |
2 1/2 | 2.88 | 2.47 | 0.203 | 3.75 | 40 | 3.2 |
3 | 3.5 | 3.07 | 0.216 | 4.5 | 40 | 4.8 |
3 1/2 | 4 | 3.55 | 0.226 | 5.25 | 40 | 6.6 |
4 | 4.5 | 4.03 | 0.237 | 6 | 40 | 8.9 |
5 | 5.56 | 5.05 | 0.258 | 7.5 | 40 | 15.1 |
6 | 6.62 | 6.07 | 0.28 | 9 | 40 | 24 |
8 | 8.62 | 7.98 | 0.322 | 12 | 40 | 47.8 |
10 | 10.75 | 10.02 | 0.365 | 15 | 40 | 83.4 |
12 | 12.75 | 12 | 0.375 | 18 | * | 123 |
14 | 14 | 13.25 | 0.375 | 21 | 30 | 155 |
16 | 16 | 15.25 | 0.375 | 24 | 30 | 206 |
18 | 18 | 17.25 | 0.375 | 27 | * | 262 |
20 | 20 | 19.25 | 0.375 | 30 | 20 | 324 |
24 | 24 | 23.25 | 0.375 | 36 | 20 | 466 |
30 | 30 | 29.25 | 0.375 | 45 | * | 720 |
36 | 36 | 35.25 | 0.375 | 54 | * | 1,039 |
42 | 42 | 41.25 | 0.375 | 63 | * | 1,420 |
48 | 48 | 47.25 | 0.375 | 72 | * | 2,000 |
SCH40 DN50 ASTM A234 WPB Reducing Tee | Dammam -KSA, Philippines, Indonesia, Belgium |
16Inch Elbow Seamless 90 Degree 3D SCH. STD ASME B16.9 ASTM A234 WPB | Qatar, Europe, France, Thailand |
carbon steel ASTM A234 WPB 1/2" BW tube Elbow STD 1.5D B16.9 90D | Czechia, Thailand, Germany, Malaysia |
ASTM A234 WPB 3 inch carbon steel sch40 pipe end caps | Malaysia, Bangladesh, USA, Finland |
ANSI A234 WPB DN250 SCH 40 Seamless carbon steel Tee | South Africa, Kuwait, Saudi Arabia (KSA), Brazil |
ASTM A234 WPB 4" sch 40 butt weded pipe fitting elbow | Bahrain, Singapore, South Africa, Singapore |
ASTM A234 GR WPB 90 degree high pressure carbon steel elbow | Philippines, UK, Australia, Nigeria |
CAP CARBON STEEL 1" STD A234 WPB | Oman, Hong Kong, Malaysia, UAE |
Sch40 astm a234 gr. wpb ansi b16.9 carbon steel elbows | Chile, Iran, Italy, Singapore |
ASTM a234 wpb butt welded carbon steel stub end | United Arab Emirates (UAE), Norway, Turkey, Malaysia |
ASTM A234 WPB 90Deg ELBOW CS SMLS BW 2" SCH40 | Netherlands, Russia, Malaysia, Dubai |
astm a234 wpb ansi b16.9 butt-welding carbon steel pipe tee | Egypt, Mexico, Spain, UK |
A234 WPB SMLS BW LR CS 90 degree elbow | United Kingdom -UK, Malaysia, Europe, UAE |
ELBOW 20Inch 45 DEG BE WELDED SCH STD CS LR GR WPB ASTM A234 ASME B16.9 | UK, Poland, Canada, Ellington -United States |
elbow 90 degree LR smls ASTM A234GR WPB 2INCH | Philippines, Canada, Malaysia, Singapore |
1" CS black concentric reducer buttweld fitting ASTM A234 WPB | Europe, Romania, Japan, Malaysia |
ASTM A234 wpb 90 degree sch80 carbon steel elbow | Sweden, Malaysia, Colombia, China |
ASTM A234 WPB 1/2" BUTT WELD SS SCH 10 LONG RADIUS 90 DEGREE ELBOW | Malaysia, Los Alamos -Mexico, Taiwan, Philippines |
90 DEG ELBOW BW ASME B16.9 SR A234 WPB WELDED | Singapore, NY 12203 (USA), South Korea, Malaysia |