Dinesh Industries > Stainless Steel 304L Pipe Fittings

Stainless Steel 304L Pipe Fittings

A stainless-steel pipe fitting which comprises chromium and nickel contents of 18% and 8% respectively is stainless steel 304L fittings. Lower rates of corrosions are exhibited by 304L graded pipe fittings, when compared to other carbon-based alloys; although they provide uniformity in their performance to resist corrosion in wide range of corrosive environments.

Adding to this, you would see utilization of ASTM A403 WP304L pipe fittings in scenarios where they resist intergranular corrosions, which are resulted due to welding process. Adding to this, they also resist heat on susceptible alloys.
SS 304L reducer also provide good resistance to oxidation scenarios up to temperatures of 16000F, and 16900F when in continuous servicing.

We are ASTM A403 WP304L elbow manufacturer in India at lowest possible price that complies with international standards

Stainless Steel 304L Pipe Fittings

Stainless Steel 304L Pipe Fittings

ASTM A403 WP304L Elbow

ASTM A403 WP304L Elbow

SS 304L Reducer

SS 304L Reducer

UNS S30403 Stub End

UNS S30403 Stub End

DIN 1.4306 End Cap

DIN 1.4306 End Cap

SA403 WP304 Tee

SA403 WP304 Tee

Thanks to the presence of higher contents of chromium and nickel. They are even resistant to carbide precipitation and not only this, you would also observe industries who utilize UNS S30403 tee above the recommended temperature limit. Excellent weldability characteristics are exhibited by this grade, which help to resist corrosion very easily and summing up to this, comes the cracking resistance.

On the other hand, you can also forge A403 WP304L elbow by the means of uniform heating up to 2100-23000F of temperature limit. Very important to note that this forging should not be done below the temperature of 17000F.

Considering this, we at Dinesh Industries, are known to be one of the largest and reputed Stainless steel 304l pipe fittings manufacturer in India, where we provide top-notch services to our customers, without any hindrances or issues. Our experienced manufacturers aim to fulfill wide range of industrial standards, by also assuring them quality service and product genuineness.

We also prioritize customer’s happiness and simplicity; where we help them to choose their desired product to meet their needs and standards.

Specification List of Stainless Steel 304L Pipe Fittings

Dimensional standard for SS 304l fittings Schedule size range
  • MSS SP-75
  • ANSI/ ASME B16.9
  • MSS-SP-83
  • ANSI/ ASME B16.25
  • MSS-SP-43 (Type A/ Type B)
  • JIS B2313
  • ANSI/ ASME B16.28
  • MSS-SP-95
  • JIS B2312
  • ANSI/ ASME B16.25
  • API 590-605
  • SCH 80
  • SCH 20
  • SCH 40
  • SCH 10
  • SCH 60
  • SCH 120
  • SCH 100
  • STD
  • SCH 140
  • XH
  • SCH 160
  • XXH
  • Welded: 1/2″ to 48″
  • Seamless: 1/2″ to 10″
Ends of 304l stainless steel pipe fittings A403 wp304l
manufacturing technique
ASTM standard
Bevelled  Hot forming ASTM A403
ASTM A403 wp304l-wx reducer types ASTM A403 wp304l tee types ASTM A403 gr wp304l elbow types
  • Eccentric reducer
  • Concentric reducer
  • Reducing Tee (Unequal)
  • Equal Tee (Straight Tee)
  • 45 degree elbow
  • short radius elbow
  • 90 degree elbow
  • long radius elbow
  • 180 degree elbow
Additional services SS 304l pipe fittings

bevel types
Production method
  • Welding
  • Threading
  • Saw cutting
  • Grinding
  • Hot dipped galvanized
  • Torch cutting
  • Beveling
  • Plasma cutting
  • Polishing
  • Plain Bevel
  • Compound Bevel
  • Seamless fittings
  • Fabricated
  • Welded fittings
Bending angle Bending technique of 304l ss pipe fittings Other types of 304l stainless fittings
  • 90°
  • 30°
  • 45°
  • 15°
  • 60°
  • 180°
  • 135°
  • Rotary Draw Bending
  • Ram-Type Bending
  • Mandrel Bending
  • Hot Induction Bending
  • Roll Bending
  • Stub End
  • Cross
  • Cap
Custom & special stainless steel 304l pipe fittings manufacturer in India ASTM A403 grade wp304l fittings
testing reqirements
Our SS 304l pipe fittings meet the requirements of
  • Stub End
  • Tee
  • Cap
  • Elbow( 45° C, 90° C,180° C)
  • Reducer
  • Pipe Bend
  • 100% Radiography Tested
  • Magnetic Particle Examination
  • PMI test
  • Ultrasonic test
  • HIC tested
  • NACE TM-0284
  • Sour service
  • MTC EN 10204 / 3.1B
  • NACE MR0103
  • NACE MR0175
  • ISO 15156
Manufacturing process WP304l-wx pipe bending radius ASTM A403 gr. wp304l
elbow radius
  • Push
  • Cast
  • Press
  • Forge
  • 8D bend
  • 180 degree long radius bend
  • 1D bend
  • 4D bend
  • 5D bend
  • 10D bend
  • 3D bend
  • 180 degree short radius bend
  • Long radius (45 & 90 degree)
  • Short radius (45 & 90 degree)

 

Origin SS 304l 90 degree elbow marking WP304l-S fittings connection
  • Japanese
  • Russian
  • Ukraine
  • USA
  • European
  • Korean
  • Indian
  • Manufacturer logo / name
  • Sizes
  • Material grade
  • Manufacturing date

 

welding

 

As a oldest supplier, you can buy SS 304L reducer and tee in Mumbai with the necessary certifications and standard dimensions.

Available Sizes of 304L SS Fittings

  • SS A403 WP304L Seamless ButtWeld Fittings : 1/2 – 10 inch
  • 304L Stainless Steel Welded Pipe Fittings : 1/2″ – 48″
  • Stainless Steel 1.4306 Fittings : ½” NB to 24″ NB

As we are stainless steel 304l pipe fittings manufacturer in India, get quote on adaptable and outstanding UNS S30403 stub end and DIN 1.4306 end cap for various industrial application, dial right away

View Stainless Steel 304L Pipe Fittings Price List

304L stainless steel fittings Price Per Piece in India SS 304L Weld Fittings Price in INR SS 304L Butt weld Pipe Fittings Price in USD SS 304L Seamless Fittings Price in UAE Dirham
STAINLESS STEEL SA 403 GR WP304L DN150,SCH 40S,45 DEGREE ELBOW(LR) Per Kg 528 US $7.27 UAE Dirham 26.71
ELBOW LJW02 S.S304 / SATIN FINISH Per Kg 962 US $13.25 UAE Dirham 48.66
STAINLESS STEEL SA 403 GR WP304L DN25,SCH 10S,EQUAL TEE,ASME,BW,SMLS Per Kg 801 US $11.03 UAE Dirham 40.52

Check estimated delivery time in different countries

Export to Product Size Price Estimated delivery days from India
Saudi Arabia SCH 40 45 Degree Elbow 1/2 in. US $14.48 7
South Africa 3/4 in. US $14.48 25-30
USA 1-1/4 in. US $24.94 40-60
Qatar 1 in. US $14.48 7
Kazakhstan 2 in. US $23.96 45-60
Malaysia 1-1/2 in. US $19.88 10
Bangladesh 2-1/2 in. US $49.28 15
Nepal 3-1/2 in. US $270.66 7
Bhutan 3 in. US $47.30 7
Vietnam 4 in. US $87.88 10
Thailand 6 in. US $231.04 7
Cambodia 5 in. US $292.17 9
Australia 3/4 in. US $23.41 21
Russia 1/2 in. US $23.23 20
Kenya 1 in. US $23.41 19
Japan 1-1/2 in. US $26.58 7
Sri lanka 1-1/4 in. US $31.63 6
Norway 2-1/2 in. US $65.31 45
Yemen 2 in. US $31.63 21
Jordan 3 in. US $65.07 21

Different Types of SS 304L Pipe Fittings

Werkstoff No 1.4301 Fittings

Werkstoff No 1.4301 Fittings

ASTM A403 SS 304L Pipe Fittings

ASTM A403 SS 304L Pipe Fittings

ASTM 403 Wp 304L Buttweld Fittings

ASTM 403 Wp 304L Buttweld Fittings

ASTM A403 Grade WP304L Elbow

ASTM A403 Grade WP304L Elbow

SS 304L Butt weld Pipe Fittings

SS 304L Butt weld Pipe Fittings

Wp 304L Stainless Steel Reducer

Wp 304L Stainless Steel Reducer

304L SS Tee

304L SS Tee

ASME SA403m SS 304L Stub End

ASME SA403m SS 304L Stub End

ASTM Grade 304L Seamless Pipe Fittings

ASTM Grade 304L Seamless Pipe Fittings

A403 WP304L Equal Tee

A403 WP304L Equal Tee

SA 403 Gr WP304L End Pipe Cap

SA 403 Gr WP304L End Pipe Cap

SS Grade 304L Cross

SS Grade 304L Cross

SA 403 Grade WP304L Reducing Tee

SA 403 Grade WP304L Reducing Tee

Stainless Steel 304L Butt weld Fittings

Stainless Steel 304L Butt weld Fittings

ASME SA403 WP304L Weld Fittings

ASME SA403 WP304L Weld Fittings

SS 1.4301 BW Fittings

SS 1.4301 BW Fittings

ASTM SS 304L Seamless Fittings

ASTM SS 304L Seamless Fittings

Stainless Steel UNS S30403 Pipe Fittings

Stainless Steel UNS S30403 Pipe Fittings

ASTM A403 WP304L Elbow

ASTM A403 WP304L Elbow

1.4301 SS 304L Equal Tee

1.4301 SS 304L Equal Tee

If you require any help fulfilling the conditions for SS 304L pipe fittings, please get in touch with us and look over our supply options to learn how much it will cost to finish your job.

Mechanical Characteristics of 304L Stainless Steel Fittings

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201

Composition Chart of ASTM A403 304L Buttweld Fittings

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2.0 max 1.0 max 0.045 max 0.03 max 18 – 20 8 – 13

Equivalent Material of ASME SA403 WP304L Seamless Fittings

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S11 58E 1.4301 X5CrNi18-10 2332 SUS 304L
Having difficulties obtaining ASME SA 403 grade WP304L butt weld fittings like reducing tee, cross, concentric/ eccentric reducer ? Don’t worry; as a stockist, we focus on the supply and fast delivery of it.

SS 304L Elbow Degree

ASME SA403m SS 304L Elbow 90deg. SR

ASME SA403m SS 304L Elbow 90deg. SR

Grade 304L Stainless Steel 90 Degree Elbow

Grade 304L Stainless Steel 90 Degree Elbow

ASTM A403 304L Elbow 90deg. LR

ASTM A403 304L Elbow 90deg. LR

ASTM A403 Gr WP304L Elbow 180deg. LR

ASTM A403 Gr WP304L Elbow 180deg. LR

Grade 304L SS Elbow 180deg. SR

Grade 304L SS Elbow 180deg. SR

SA 403 WP304L 45 Degree Elbow

SA 403 WP304L 45 Degree Elbow

A403 WP304L Elbow 45deg. LR

A403 WP304L Elbow 45deg. LR

Stainless Steel 304L 180 Degree Elbow

Stainless Steel 304L 180 Degree Elbow

Types Of UNS S30403 Elbow Joint Pipe

sch 40 90 degree Stainless Steel UNS S30403 seamless Pipe Elbows

sch 40 90 degree Stainless Steel UNS S30403 seamless Pipe Elbows

EN 10253-3 TYPE B  Werkstoff No 1.4301 Elbow

EN 10253-3 TYPE B Werkstoff No 1.4301 Elbow

304L Stainless Steel SR Elbow

304L Stainless Steel SR Elbow

SA 403 Gr WP304L Miter Bend

SA 403 Gr WP304L Miter Bend

ASTM Grade 304L Buttweld Elbow

ASTM Grade 304L Buttweld Elbow

EN 10253-3 TYPE A  Material SS 1.4301 Elbow

EN 10253-3 TYPE A Material SS 1.4301 Elbow

Butt welded SS UNS S30403 LR Seamless elbows

Butt welded SS UNS S30403 LR Seamless elbows

EN 10253-4 type a ASTM A403 Grade WP304L Elbow

EN 10253-4 type a ASTM A403 Grade WP304L Elbow

SCH80 high pressure ASME SA403 WP304L elbow

SCH80 high pressure ASME SA403 WP304L elbow

SS Grade 304L Reducing Elbow

SS Grade 304L Reducing Elbow

A403-WP304l-wx LR Elbow

A403-WP304l-wx LR Elbow

A403 gr.WP304l welded elbows

A403 gr.WP304l welded elbows

304l stainless steel Return Bends

304l stainless steel Return Bends

SA 403 Grade WP304L ASME B16.9 SCH 40 elbow

SA 403 Grade WP304L ASME B16.9 SCH 40 elbow

EN 10253-4 TYPE B ASTM A403 gr wp 304l Elbow

EN 10253-4 TYPE B ASTM A403 gr wp 304l Elbow

Various Radius Types of SA 403 WP304L Elbows

SA 403 Grade WP304L 180º Bends

SA 403 Grade WP304L 180º Bends

1.4301 SS 304L short radius bend

1.4301 SS 304L short radius bend

AISI 304L SS long radius bend

AISI 304L SS long radius bend

ASTM 403 Wp 304L 2D  Pipe Bend

ASTM 403 Wp 304L 2D Pipe Bend

SS 304L 1D Pipe Bend

SS 304L 1D Pipe Bend

304L SS Hot Induction Bend

304L SS Hot Induction Bend

ASTM A403 SS 304L 10D Pipe Bend

ASTM A403 SS 304L 10D Pipe Bend

ASTM SS 304L 3D  Pipe Bend

ASTM SS 304L 3D Pipe Bend

Wp 304L Stainless Steel 1.5D Pipe Bend

Wp 304L Stainless Steel 1.5D Pipe Bend

ASTM A403 WP304L 5D Pipe Bend

ASTM A403 WP304L 5D Pipe Bend

Ready Stock of SS 304L Buttweld Pipe Fittings

ASTM A403 WP304L Fittings ASME SA403 WP304L Pipe Fitting
UNS S30403 90 Degree Elbow Stainless Steel 1.4306 End Cap
SS A403 WP304L 45 Degree Elbow 304L SS Buttweld Fitting
UNS S30403 3D Elbow Stainless Steel 304L End Cap
304L SS 5D Elbow ASME SA403 WP304L Reducer
SS A403 WP304L Equal Cross ASME SA403 WP304L Pipe Cap
ASTM A403 WP304L Lateral Tee Stainless Steel 1.4306 Cross Tee
Stainless Steel 304L 1D Elbow 304L Stainless Steel Short Stub End
304L SS Stub End ASTM A403 WP304L Pipe Cap
ASTM A403 WP304L Buttweld Fittings Stainless Steel 1.4306 Pipe Bend
SS A403 WP304L Pipe Fittings Stainless Steel 304L Long Stub End
304L SS Eccentric Reducer Stainless Steel 1.4306 Long Radius Elbow
ASME SA403 WP304L Equal Tee Stainless Steel 304L Stub End
UNS S30403 Concentric Reducer SS A403 WP304L 5D Elbow
304L Stainless Steel Concentric Reducer UNS S30403 Short Radius Elbow
304L Stainless Steel Reducing Cross 304L SS Equal Cross

Stainless Steel 304L Pipe Fittings Dimensions

Nominal
PipeSize
Outside
Diameter
90° Elbows 45° Elbows 180° Returns
(inches)
Long Radius
Short Radius
Long Radius
Long Radius
(mm)
(inches)
Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2
21.3
0.840
1 1/2
5/8
2
1 7/8
3/4
26.7
1.050
1 1/8
7/16
2 1/4
1 11/16
1
33.4
1.315
1 1/2
1
7/8
3
2 3/16
1 1/4
42.2
1.660
1 7/8
1 1/4
1
3 3/4
2 3/4
1 1/2
48.3
1.900
2 1/4
1 1/2
1 1/8
3
4 1/2
3 1/4
2
60.3
2.375
3
2
1 3/8
4
6
4 3/16
2 1/2
73.0
2.875
3 3/4
2 1/2
1 3/4
5
7 1/2
5 3/16
3
88.9
3.500
4 1/2
3
2
6
9
6 1/4
3 1/2
101.6
4.000
5 1/4
3 1/2
2 1/4
7
10 1/2
7 1/4
4
114.3
4.500
6
4
2 1/2
8
12
8 1/4
5
141.3
5.563
7 1/2
5
3 1/8
10
15
10 5/16
6
168.3
6.625
9
6
3 3/4
12
18
12 5/16
8
219.1
8.625
12
8
5
12
24
16 5/16
10
273.1
10.750
15
10
6 1/4
15
30
20 3/8
12
323.9
12.750
18
12
7 1/2
18
36
24 3/8

SA 403 WP304L BW Fittings Manufacturer Which is used in various industries

Elbow

ASTM A403 Grade WP304L Bends

  • ASME SA403m SS 304L 45° bend R=D+100
  • Grade 304L Stainless Steel bend 90° R=D+100
  • ASTM A403 304L 45° bend type 2D
  • ASTM A403 Gr WP304L bend 90° type 2D
  • Grade 304L SS 45° bend type 5D
  • SA 403 WP304L orbital welding bend 90°
  • A403 WP304L orbital welding bend 45°
  • Stainless Steel 304L bend 90° with straight ends
  • SA 403 Grade WP304L bend 45° with straight ends
  • 1.4301 SS 304L 45° seamless bend type 3D
  • AISI 304L SS seamless bend 90° type 3
  • ASTM 403 Wp 304L 180° seamless bend type 3D
  • SS 304L 45° seamless bend type 2D
  • 304L SS seamless bend 90° type 2D
  • ASTM A403 SS 304L seamless bend 90° type 5D
 bend

SA 403 WP304L T- and Y-bends

  • Wp 304L Stainless Steel T-piece, welded EN 10253-4/A
  • ASTM A403 WP304L T-piece, welded branch
  • Stainless Steel UNS S30403 T-piece reduced, welded
  • Werkstoff No 1.4301 T-piece reduced EN 10253-3
  • 304L Stainless Steel T-piece reduced short extended
reducer

SS 304L Reducer

  • ASTM Grade 304L Y-bend, welded
  • Material SS 1.4301 T-bend, welded
  • SS UNS S30403 T-bend reduced
  • ASTM A403 Grade WP304L branch bend DIN 2619
cap

Stainless Steel 304L cap

  • ASME SA403 WP304L branch bend, similar DIN 2619
  • ASTM SS 304L reducer DIN EN 10253-4/A
  • SS Grade 304L reducer DIN EN 10253-3
  • SA 403 Gr WP304L seamless reducer, concentric
  • Wp 304L Stainless Steel seamless reducer, eccentric
collar

304L Stainless Steel collar

  • Stainless Steel UNS S30403 torispherical head DIN 28011
  • Werkstoff No 1.4301 torispherical head, flat
  • ASTM A403 Grade WP304L cap EN 10253
  • ASME SA403 WP304L cap with central hole
  • SS Grade 304L semi-elliptical head DIN 28013
  • ASTM A403 WP304L welding collar PN 6
Tee

ASME SA403m SS 304L Tee

  • Grade 304L Stainless Steel welding collar PN 10
  • ASTM A403 304L pressed collar EN1092-1/type37
  • ASTM A403 Gr WP304L reduction collar
  • Grade 304L SS branch saddle, short
  • SA 403 WP304L stub end, short length

AISI 304L SS Stub End, Cap, Tee Dimensions

Nominal Caps Outside Straight Tees Stub Ends Straight Crosses
Pipe Diameter
Size  
(inches) Length (mm) (inches) Center to End Lap Diameter Long Length Short Length Center to End
(inches) (inches) (inches) (inches) (inches) (inches)
1/2 1 21.3 0.84 1 1 3/8 3 2
3/4 1 26.7 1.05 1 1/8 1 11/16 3 2
1 1 1/2 33.4 1.315 1 1/2 2 4 2 1 1/2
1 1/4 1 1/2 42.2 1.66 1 7/8 2 1/2 4 2 1 7/8
3 1/2 2 1/2 101.6 4 3 3/4 5 1/2 6 3 3 3/4
1 1/2 1 1/2 48.3 1.9 2 1/4 2 7/8 4 2 2 1/4
2 1 1/2 60.3 2.375 2 1/2 3 5/8 6 2 1/2 2 1/2
2 1/2 1 1/2 73 2.875 3 4 1/8 6 2 1/2 3
3 2 88.9 3.5 3 3/8 5 6 2 1/2 3 3/8
4 2 1/2 114.3 4.5 4 1/8 6  3/16 6 3 4 1/8
8 4 219.1 8.625 7 10 5/8 8 4 7
10 5 273.1 10.75 8 1/2 12 3/4 10 5 8 1/2
5 3 141.3 5.563 4 7/8 7  5/16 8 3 4 7/8
6 3 1/2 168.3 6.625 5 5/8 8 1/2 8 3 1/2 5 5/8
12 6 323.9 12.75 10 15 10 6 10

Weight Chart of DIN 1.4301 BW Fittings

Weight Chart of 304 stainless steel buttweld fittings