Dinesh Industries > WPHY 65 Fittings

WPHY 65 Fittings

ASTM A860 is a specification that covers wrought material, high strength low alloy grade butt-welding steel fittings. Typically these ASTM A865 WPHY 65 Pipe Fittings are manufactured using either a seamless or an electric fusion-welded construction. We are leading WPHY 65 Fittings Manufacturer. The applications for the ASTM A860 specified fittings include their use in high pressured transmission and distribution systems in industries such as the oil and gas as well as the petrochemical industry. Starting materials used in the production of these flanges consist of a sheet, plate, forgings, forging quality bar, in addition to seamless or fusion-welded tubular products with the inclusion of filler metal. Biggest Manufacturer of WPHY 65 Tee. Materials used to make the ASTM A865 WPHY 65 Reducer is required to be heat treated by conducing processes such as normalizing, quenching, and tempering or stress relieving.

Buy A860 Wphy 65 Tee at factory price in Mumbai, Mss Sp 75 Wphy 65 Elbow Manufacturer

WPHY 65 Fittings

WPHY 65 Fittings

A860 Wphy 65 Tee

A860 Wphy 65 Tee

Mss Sp 75 Wphy 65 Elbow

Mss Sp 75 Wphy 65 Elbow

A694 Wphy 65 End Cap

A694 Wphy 65 End Cap

A860 Gr Wphy 65 Reducer

A860 Gr Wphy 65 Reducer

Wphy 65 Stub End

Wphy 65 Stub End

As expected of the specification the specimens, which in this case could be the A865 WPHY 65 Tee is required to conform to the values with regards to the chemical composition as well as its mechanical properties. Dinesh Industries is leading Supplier and Manufacturer of ASTM A860 Gr WPHY 65 Buttweld Fittings. The mechanical properties that the WPHY 65 Elbow must conform to include its yield strength, tensile strength, elongation, notch toughness, as well as hardness. Similar to the ASTM A860, the MSS SP 75 is a standard specification is for high strength wrought alloy grade fittings such as straight tees, reducing tees, long-radius elbows, 3R elbows, caps and reducers. The term WPHY in MSS Sp75 WPHY 65 Fittings are split up as follows – WP is the abbreviation for either wrought pipe or plate whereas the HY means high yield. Manufacturer of Grade WPHY 65 End Cap in Mumbai.

WPHY 65 Fittings Manufacturer
WPHY 65 Fittings Manufacturer

WPHY 65 Fittings Spec Chart

size Seamless Fittings: 1/2″ – 10″
Welded Fittings: 1/2″ – 48″
Dimensions ASME/ANSI B16.9, MSS-SP-43, BS4504, ASME B16.28, BS4504, BS1560, BS10
Elbows Manufacturer Angle : 30deg, 45 deg, 180 deg, 1.0D, 22.5 deg, 90 deg, 5D, 6D, 1.5D, 2.0D, 2.5D, 3D, 4D, 7D-40D .
Standard: ASME B16.9, ASME B16.28, BS, GB, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, ASME B16.25, ISO
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Origin & Mills European, Ukraine, USA, Korean, Japanese, Indian, Russian
Thickness SCH30, STD SCH40, SCH10, SCH60, XS, SCH 80, SCH20, SCH 100, SCH 120, SCH 140, SCH 160, XXS
Hydrostatic Test Not required
Type DN15-DN1200
Connection Welding
Manufacturing process Press, Push, Forge, Cast, etc.
Export to Ahvaz, London, Ranchi, Howrah, Melbourne, Istanbul, Janeiro, Ankara, Nagpur, Courbevoie, Ludhiana, Gujarat, Mexico, Caracas, Sydney, Gimhae-si, Coimbatore, Thiruvananthapuram Mumbai, Bangalore, Tau, Ludhiana, Port-of-Spain, Kolkata, Bengaluru, Kuwait, Rajkot, Jamshedpur, Pimpri-Chinchwad, Vadodara, Chennai, Dammam, Tehran, Indore, Abu Dhabi, Ernakulam, Lagos, Calgary, Noida, Muscat, Ahmedabad, Montreal, Perth, Riyadh, Hyderabad, Santiago, Baroda, Manama, Surat, Kanpur, Bogota, Khobar, Gurgaon, New Delhi,
Surface treatment Sand Rolling, Sand blasting, Sand Blasting
Surface Coatings Black Painted, Varnished, Epoxy Coated, Galvanized
Specialized Manufacturer of 45º Elbows, Reducers, Tees, Pipe Bend, Crosses, 90º Elbows, Pipe Cap, Stub End
ASTM A860 WPHY 65 is common use grade refers piping material in API 5L X65(PSL1 & PSL2)

Check A860 Gr Wphy 65 Reducer Dimensions & Weight charts, Ask For ready stock of Wphy 65 Stub End.

Various Sizes of ASTM A860 WPHY 65 Pipe Fitting

  • High Strength yield 65 Seamless ButtWeld Fittings : 1/2 – 10 inch
  • ASME SA860 65 Welded Pipe Fittings : 1/2″ – 48″
  • mss sp-75 65 Fittings : ½” NB to 24″ NB

Carbon Steel WPHY Gr 65 Elbow Degrees

MSS SP75 65 Elbow 90deg. SR

MSS SP75 65 Elbow 90deg. SR

Carbon Steel Grade 65 Elbow 180deg. LR

Carbon Steel Grade 65 Elbow 180deg. LR

CS Grade 65 High Yield Elbow 45deg. LR

CS Grade 65 High Yield Elbow 45deg. LR

WPHY Grade 65 CS 45 Degree Elbow

High Strength 65 Buttweld 45 Degree Elbow

Carbon Steel Grade 65 Elbow 180deg. SR

Carbon Steel Grade 65 Elbow 180deg. SR

65000 PSI 90 Degree Elbow

65000 PSI 90 Degree Elbow

Carbon Steel X65 Elbow 90deg. LR

Carbon Steel X65 Elbow 90deg. LR

MSS SP75 WPHY 65 180 Degree Elbow

MSS SP75 WPHY 65 180 Degree Elbow

Types of WPHY Grade 65 CS Buttweld Elbow

A860 WPHY 65 CS Miter Bend

A860 WPHY 65 CS Miter Bend

MSS SP 75 WPHY 65 Reducing Elbow

MSS SP 75 WPHY 65 Reducing Elbow

Butt welded CS Gr 65 High Yield LR Seamless elbows

Butt welded CS Gr 65 High Yield LR Seamless elbows

SCH80 high pressure A860 Gr WPHY 65 elbow

SCH80 high pressure A860 Gr WPHY 65 elbow

A860 Grade WPHY 65 ASME B16.9 SCH 40 elbow

A860 Grade WPHY 65 ASME B16.9 SCH 40 elbow

mss sp-75 65 High Yield LR Elbow

mss sp-75 65 High Yield LR Elbow

CS WPHY Grade 65 Buttweld Elbow

CS WPHY Grade 65 Buttweld Elbow

A860 MSS SP 75 WPHY 65 Return Bends

A860 MSS SP 75 WPHY 65 Return Bends

A860 65 SR Elbow

A860 65 SR Elbow

Carbon Steel WPHY Gr 65 welded elbows

Carbon Steel WPHY Gr 65 welded elbows

sch 40 90 degree Carbon Steel API 5L X65 seamless Pipe Elbows

sch 40 90 degree Carbon Steel API 5L X65 seamless Pipe Elbows

Different Types Of ASTM A860 MSS SP 75 WPHY 65 Bends

High Strength 65 Buttweld 180º Bends

High Strength 65 Buttweld 180º Bends

MSS SP-75 Gr 65 10D Pipe Bend

MSS SP-75 Gr 65 10D Pipe Bend

65000 PSI 3D  Pipe Bend

65000 PSI 3D Pipe Bend

CS Gr 65 High Yield long radius bend

CS Gr 65 High Yield long radius bend

High Strength 65 Buttweld short radius bend

High Strength 65 Buttweld short radius bend

API 5L X65 Hot Induction Bend

API 5L X65 Hot Induction Bend

WPHY 65 1D Pipe Bend

WPHY 65 1D Pipe Bend

Carbon Steel X65 1.5D Pipe Bend

Carbon Steel X65 1.5D Pipe Bend

CS WPHY Gr 65 5D Pipe Bend

CS WPHY Gr 65 5D Pipe Bend

Carbon Steel WPHY Grade 65 2D  Pipe Bend

Carbon Steel WPHY Grade 65 2D Pipe Bend

Ready Stock of ASTM A860 WPHY 65 Buttweld Fittings, Top-notch stockist of A694 Wphy 65 End Cap

Dinesh Industries is Manufacturer of ASTM A860 WPHY Grade 65 Reducer which is used in high pressure gas and oil transmission systems, Marine, Navy, Chemical Processing. SA860 WPHY 65 Fittings has dimensions, tolerances, toughness properties, tensile properties.

Cost of Grade WPHY 65 Fittings

Carbon steel WPHY 65 Pipe Fittings Price Per Piece in India mss sp-75 65 Fittings Price in INR High Strength yield 65 Weld Fittings Price in USD WPHY 65 Carbon steel Fittings Price in UAE Dirham
ASTM A860 GR 65 2-1/2″ Long Radius Elbow Per Unit 2969.40 $42.85 UAE Dirham 157.39
Carbon steel 65 4″ Long Radius Elbow Per Kg 6281.13 US $90.64 UAE Dirham 332.92
WPHY 65 Carbon steel 2″ x 2″ x 1/2″ Reducing Tee Per Unit 10384.92 US $149.86 UAE Dirham 550.43
CS 65 2-1/2″ x 2-1/2″ x 1-1/2″ Reducing Tee Per Unit 11420.23 US $164.80 UAE Dirham 605.31
A860 WPHY 65 CS 4″ Cap Per Kg 3854.33 US $55.62 UAE Dirham 204.29
Check available sizes of Mss Sp 75 Gr Wphy 65 Pipe Fittings, Get a best quote for ASME B16.9 WPHY 65 Eccentric Reducer from leading manufacturers

Composition Chart of WPHY 65 Pipe Fittings

C Mn S P Si Ni Cr Mo Cu Ti V Cb Al
0.20 1.00-1.45 0.03 0.01 0.15-0.40 0.50 0.30 0.25 0.35 0.05 0.10 0.06

Mechanical Properties Chart of MSS sp 75 WPHY 65 Buttweld Fitting

Element Tensile Strength(Min PSI) Yield Strength (Min PSI) Elongation(%, in 2in.)
WPHY 65 77000 PSI 65000 PSI 20 %
Buy A860 Gr Wphy 65 Long Radius Elbow directly from Suppliers, Specialise in distributing Wphy 65 Reducing Tee

ASME SA860 WPHY 65 Pipe Fittings Dimensions

Nominal
Pipe

Size

Outside
Diameter
90° Elbows 45° Elbows 180° Returns
(Inch)
LR
SR
LR
LR
(mm)
(Inch)
Center to Face
(Inch)
Center to Face
(Inch)
Center to Face
(Inch)
Radius
(Inch)
Center to Center
(Inch)
Back to face
(Inch)
1/2
21.3
0.840
1 1/2
5/8
2
1 7/8
2 1/2
73.0
2.875
3 3/4
2 1/2
1 3/4
5
7 1/2
5 3/16
3
88.9
3.500
4 1/2
3
2
6
9
6 1/4
3 1/2
101.6
4.000
5 1/4
3 1/2
2 1/4
7
10 1/2
7 1/4
6
168.3
6.625
9
6
3 3/4
12
18
12 5/16
8
219.1
8.625
12
8
5
12
24
16 5/16
10
273.1
10.750
15
10
6 1/4
15
30
20 3/8
4
114.3
4.500
6
4
2 1/2
8
12
8 1/4
3/4
26.7
1.050
1 1/8
7/16
2 1/4
1 11/16
1
33.4
1.315
1 1/2
1
7/8
3
2 3/16
1 1/4
42.2
1.660
1 7/8
1 1/4
1
3 3/4
2 3/4
1 1/2
48.3
1.900
2 1/4
1 1/2
1 1/8
3
4 1/2
3 1/4
2
60.3
2.375
3
2
1 3/8
4
6
4 3/16
5
141.3
5.563
7 1/2
5
3 1/8
10
15
10 5/16
12
323.9
12.750
18
12
7 1/2
18
36
24 3/8

We sale Following Mss Sp 75 Wphy 65 Fittings

Seamless Elbow 90LR 1/2

Seamless Elbow 90LR 1/2″ Sch. STD High Strength yield 65

Seamless Cap 22

Seamless Cap 22″ Sch. XS A/SA860 WPHY 65

Seamless Concentric Reducer 18

Seamless Concentric Reducer 18″ Sch. XS x 16″ Sch. XS A/SA860 WPHY 65

Seamless Concentric Reducer 2 1/2

Seamless Concentric Reducer 2 1/2″ Sch. STD x 1 1/4″ Sch. STD A/SA860 WPHY 65

Seamless Elbow 180LR 14

Seamless Elbow 180LR 14″ Sch. STD A/SA860 WPHY 65

Seamless Elbow 180SR 3 1/2

Seamless Elbow 180SR 3 1/2″ Sch. XS A/SA860 WPHY 65

Seamless Eccentric Reducer 12

Seamless Eccentric Reducer 12″ Sch. 40 x 5″ Sch. STD A/SA860 WPHY 65

Seamless Eccentric Reducer 10

Seamless Eccentric Reducer 10″ Sch. STD x 8″ Sch. STD A/SA860 WPHY 65

Seamless Elbow 90LR 1/2

Seamless Elbow 90LR 1/2″ Sch. 160 A/SA860 WPHY 65

Seamless Elbow 45SR 1 1/2

Seamless Elbow 45SR 1 1/2″ Sch. STD A/SA860 WPHY 65

Seamless Reducing Tee 1 1/4  Sch. XS x 1inch Sch. XS High Yield 65

Seamless Reducing Tee 1 1/4″ Sch. XS x 1″ Sch. XS High Yield 65

astm a860 wphy 65 2 inch elbow 90

astm a860 wphy 65 2 inch elbow 90

10

10″ TEE SCH 40 A860 65

ASTM A860 WPHY 65 12 inch SCH80 45 LR Elbow

Wrought Pipe High-Yield 65 12 inch SCH80 45 LR Elbow

MSS SP 75 65 Buttweld End Cap

MSS SP 75 65 Buttweld End Cap

4 inch sch40 WPHY 65 pipe ends

4 inch sch40 High Yield 65 pipe ends

Available WPHY 65 Fittings Stock list

Carbon Steel Grade 65 Fittings SA860 WPHY 65 Pipe Fitting
A860 65 90 Degree Elbow CS Grade 65 High Yield End Cap
Carbon Steel X65 45 Degree Elbow MSS SP75 65 Buttweld Fitting
A860 65 3D Elbow MSS Sp75 WPHY 65 End Cap
CS Gr 65 High Yield 5D Elbow Grade 65 Carbon Steel Reducer
API 5L X65 Equal Cross SA860 65 Pipe Cap
MSS SP75 65 Lateral Tee Grade WPHY 65 Cross Tee
MSS Sp75 65 1D Elbow ASME SA860 65 Short Stub End
Gr 65 Carbon Steel Buttweld Fittings Wrought Pipe High-Yield 65 Pipe Bend

Charpy impact energy of Wphy 65 Tee

Charpy impact energy 40 J at 23 °C

Cv energy absorption of A860 Wphy 65

Size, mm Lateral Expansion min, MLS[mm] Average/min, ft·lbs[J]
10 × 7.5 21 [0.53] 25/21 [34/28]
10 × 5 13 [0.33] 20/17 [27/23]
10 × 10 25 [0.64] 30/25 [40/34]

Astm A860 Wphy 65 Elbow Hardness Requirements

Hardness Requirements 22 HRC (235 HB).

Poisson’s ratio of Wrought Pipe High-Yield 65 Fittings

Poisson’s ratio 0.29 [-] at 23 °C

Application of Wphy Grade 65 Pipe Fittings

  • Chemical Industries
  • Pharmaceutical Plant
  • Thermal & Nuclear Power Plants
  • Fertilizer Plant
  • Food & Dairy Plants
  • Paper Industries
  • Oil & Gas Exploration
  • Aerospace
  • Desalination Plant

Value Added Services of WPHY 65 Fittings

  • Polishing
  • Heat Treatment, Annealing, Pickling
  • Ultrasonic Testing of
  • 100% X-Ray Welding for Large Diameter Custom Size
  • Beveling
  • Cold Drawing Services
  • Special Testing Requirements – Destructive Testing, Non Destructive Testing etc.

High quality ASTM A860 WPHY 65 Fittings manufacturers in as per DIN, ISO, JIS or ANSI standard. Manufacturer and supplier of ASTM A860 Gr WPHY 65 Elbow in SCH10-SCHXXS

We are supplying in Below Contries for More Than 20 years

wphy 65 elbow Lr 90 degree 14″  Indonesia, Philippines, Dammam -KSA, Belgium
WPHY 65 6in Sch80 45deg Sr Seamless Elbow France, Europe, Qatar, Thailand
ASTM A860 WPHY 65 High Yield Carbon Steel Fittings Germany, Thailand, Czechia, Malaysia
ASTM A860 WPHY 65 24″*20″ SCH40 Concentric reducer USA, Bangladesh, Malaysia, Finland
ASTM A860 Gr. Wphy 65 Seamless Cap Saudi Arabia (KSA), Kuwait, South Africa, Brazil
A860 Wphy 65 Seamless Concentric Pipe Reducer South Africa, Singapore, Bahrain, Singapore
ASTM A860 Grade Wphy 65 Pipe Fitting Australia, UK, Philippines, Nigeria
 1/2 / 4 inch Wphy 65 90 degree elbow Malaysia, Hong Kong, Oman, UAE
High pressure elbow 2″ SCH40s ASTM A860 Wphy 65 Italy, Iran, Chile, Singapore
elbow 90 degree LR smls Wphy 65 2INCH Turkey, Norway, United Arab Emirates (UAE), Malaysia
SCH80 1/2” Long Radious Elbows SCH80 B16.9 Wphy 65 Malaysia, Russia, Netherlands, Dubai
ASME B16.9 Wphy 65 90 DEG carbon steel Elbow Spain, Mexico, Egypt, UK
sch40 Tee Wphy 65 2″ Europe, Malaysia, United Kingdom -UK, UAE
sch40 24 inch 90 degree elbow seamless Wphy 65 Canada, Poland, UK, Ellington -the United States
Wphy 65 3 inch sch40 90 pipe elbow Malaysia, Canada, Philippines, Singapore
10″ TEE SCH 40 A860 WPHY 65 Japan, Romania, Europe, Malaysia
1/4″ Reduced Elbow 90 Degree WPHY 65 Colombia, Malaysia, Sweden, China
ASTM A860 Mss Sp 75 Wphy 65 Lap Joint Stub Ends Taiwan, Los Alamos -Mexico, Malaysia, Philippines
ASTM B16.9 90 Degree Wphy65 2″ Fitting Elbow South Korea, NY 12203 (USA), Singapore, Malaysia