Monel Pipe Bends

Monel Pipe Bends

Monel 400 10D Pipe Bend, Alloy k500 Mitered Pipe Bend manufacturer in India

Supplier of Monel 10D Pipe Bend, UNS N05500 Customized Pipe Bend

Monel  Pipe Bend manufacuter in IndiaMonel Pipe Bend

Monel 400 U Pipe Bend Manufactuer of IndiaMonel 400 U Pipe Bend

Monel k500 Piggable Pipe Bend Manufactuer of IndiaMonel k500 Piggable Pipe Bend

Standard Specification for Monel pipe bends:

Specifications : ASTM B366 & ASME SB366

Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75

Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Outer Diameter : 38.0 mm – 206.0 mm

Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request

Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm

Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°

Grades : Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)

Monel Alloy Pipe Bends Standards / Types And Pressure Class :

ASME Pipe Bend ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN Pipe Bend DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN Pipe Bend EN10253-1, EN10253-2
ASTM B366 ASME SB366 – Standard Specification for Steel Piping Fittings
ASME B16.9 Factory-Made Wrought Fittings Buttwelding
ASME B16.25 Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Monel Pipe Bend Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe
Monel K500 2.4375 N05500

Chemical Composition of Grade Monel Alloy Pipe Bends

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Mechanical Properties of Monel Pipe Bend

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Monel 400 / k500 Pipe Bends Application

  • Monel 400 Pipe Bends uses in Oil and Gas Pipeline
  • ASTM B366 K500 Pipe Bend uses in Chemical Industry
  • Grade 400 Monel Buttweld Bend uses in Plumbing
  • Monel ASTM B366 K500 Pipe Bends uses in Heating
  • ASTM B366 400 Monel Pipe Bends uses in Water Supply Systems
  • ASTM B366 K500 Monel Bends uses in Power Plant
  • Monel 400 Pipe Bends uses in Paper & Pulp Industry
  • 400 Monel Pipe Bend uses in General Purpose Applications
  • ASME SB366 Monel 400 Pipe Bend uses in Fabrication Industry
  • Monel K500 Pipe Bends uses in Food Processing Industry
  • Alloy 400 Pipe Bends uses in Structural Pipe

Exporter of Monel 400 J Pipe Bend, WNR 2.4360 High Pressure Bending

Stockholder of Alloy K500 Hot Induction Bend, DIN 2.4375 Buttweld Bend in Mumbai
Check standard and pricelist of Monel Piggable Bend

Comments are closed.