Dinesh Industries > Carbon steel flanges

Carbon steel flanges manufacturer in India

Carbon steel flanges manufacturer in India

CS flanges are widely manufactured in India which are applicable in pipe-line units for various industrial sectors. Carbon steel flanges are basically made up of carbon and steel alloy which provides properties such as resistance to corrosion, excellent durability, and finishing in goods. The available content of carbon range is about 1% to 2.1% in weight in the CS flanges and are useful to connect valves, pumps and pipes for the piping system.

Flanges are components in pipe systems that hold pipes together with modified faces, collars or processes. As a carbon steel flanges manufacturer in India we produce flanges of different types to be used in different applications. The Carbon Steel Flanges have high wear and tear resistance. They have less corrosion resistance compared to most stainless steels and have less strength compared to some special alloy material, but they are of high cost efficiency. There are different types of flanges used in different applications. Our Carbon Steel Blind Flange is used to close a pipe line in a system. The blind flange has a flat end with which it closes the pipe.

Contact Dinesh industries, a well established carbon steel flanges manufacturer in India.

Manufacturer of forged carbon steel flanges in Mumbai as per ANSI/ ASME B16.5, B16.47 & B16.36

The ASME B16.5 for CS pipe flange with fitting of NPS ½ within NPS 24 Metric/Inch standards covers pressure-temperature ranges, material, dimension, tolerance, marking, checking, and methods of designating for carbon steel flanges.
The ASME B16.47 is a standard for larger diameter carbon steel flanges size from NPS 26 within NPS 60, which provides ratings and dimension in both metric and inch units.

The ASME B16.36 is a standard for carbon steel orifice flanges used for measuring the flow rate of liquids or gases in a pipeline, where pairs of pressure taps, mostly on 2 sides directly opposite from each other are machined into the orifice flange.

Carbon Steel Flanges

Carbon Steel Flanges

Low CS Slip on Flange

Low CS Slip on Flange

Quenching Carbon Steel Flange

Quenching Carbon Steel Flange

Low Temp Carbon Steel Forged Flange

Low Temp Carbon Steel Forged Flange

Killed carbon steel Weld Neck Flange

Killed carbon steel Weld Neck Flange

Normalized CS Socket weld Flanges

Normalized CS Socket weld Flanges

Supplier of low temperature & normalized carbon steel flanges in different types including blind, slip on, orifice, weld neck, socket weld flange in FF/ RF faces

The carbon steel flange flat face is flat surface completely where used gasket gets packed in as bolting circle face to both connected flat surfaces of 2 flanges in pipeline.
FF faces are meant to prevent the bending movement that is put on flanges as the bolts are torqued. FF are widely used in as low temperature carbon steel flanges with low pressure system of water treatment facilities

Carbon steel raised face flange are raised surface above the bolting circle where the gasket are supposed to be placed in the joining sections. RF faces are meant to concentrate the contact pressure on the gasket area, results in increased strength of the seal and appropriate for both high and low temperature and pressure so have vast uses in oil and gas industry.

There are CS Slip On Flange types which allow pipes to slip through them so the connection could be made in the desired locations. Most flanges are welded together with the pipe for maximum and permanent connectivity. The Carbon Steel Puddle Flange is used to connect two pipes and seal them tight by holding the ends of pipes inside the flange structure. We are leading Manufacturer of Low Temp Carbon Steel flanges. The Carbon Steel Weld Neck Flange has a welded neck that increases the grip with the pipes and welding surface. Our Low Carbon Steel Forged Flange has comparatively higher corrosion resistance and strength but low wear and tear resistance. We supply carbon steel flanges in Singapore, UAE & Malaysia at very competitive price. Please contact us for any query like dimensions, ready stock sizes and latest price list.

Carbon Steel Flanges manufacturer in India
Carbon Steel Flanges Manufacturers In India

Specification Format of Carbon Steel Flanges

Manufacturing size range of Dinesh Industries Normalized carbon steel flanges faces types Forged carbon steel flanges American standards
  • 1/2 to 48 Inches
  • PN 2.5 – PN 400
  • 15NB – 1200NB
  • For large or custom sizes please contact our sales team (India)
  • Flat Face or Plain Face (FF)
  • Raised Face (RF)
  • RTJ – Ring Joint
  • Tongue and Groove – T&G
  • Male Female face – M&F
  • Lap Joint – LJ
  • ASME B16.5: Class 150 – 2500LBS
  • ASME B16.47: Series A/ B
  • ASME B16.36 (Orifice)
  • ASME B16.48 (Spectacle Blinds)
High & low temp carbon steel flanges pressure class Types of carbon steel flanges which has highest demand Manufacturing technique
  • Class 150
  • Class 300
  • Class 600
  • Class 900
  • Class 1500
  • Class 2500
  • CS socket weld flanges
  • Carbon steel slip on flanges
  • CS lap joint flanges
  • Weld neck carbon steel flanges
  • Carbon steel blind flanges
  • CS reducing flange
  • Threaded carbon steel flanges

Dinesh Industries can produce plate/ forged CS flanges as per the customer drawing, compare our price and shipping time with other carbon steel flanges manufacturers in India

  • Forged (Most popular)
  • Carbon steel plate flange
  • Cast
Types of carbon steel blind flanges Types of carbon steel weld neck flanges Types of carbon steel slip on flanges
  • CS raised face blind flange
  • carbon steel flat face blind flange
  • CS ring type joint blind flange
  • CS threaded blind flange
  • carbon steel forged blind flange
  • CS raised face weld neck flange
  • CS flat face weld neck flange
  • Carbon steel long weld neck flange
  • CS ring type joint weld neck flange
  • CS raised face slip on flange
  • CS flat face slip on flange
  • CS ring type joint slip on flange
  • CS threaded slip on flange
  • Carbon steel forged slip on flange
Marking Carbon steel forged flanges finish Carbon steel pipe flanges installations & applications
  • Manufacturer logo / name
  • Manufacturing date
  • Material grade
  • Sizes
  • ASTM/ ASME standard
  • Face type
  • Pressure class
  • Origin of country

Please note: Dinesh Industries also offer cstom marking

  • Stock Finish
  • Serrated finish
  • Spiral Serrated
  • Concentric Serrated
  • Smooth Finish
  • Cold Water Finish (mirror finish)
  • Gas, Oil & petrochemical plants
  • Nuclear power
  • Power plants
  • Industrial mechanical systems
  • Industrial vessels
  • Industrial piping connection (High/ Low pressure)
CS Flanges DIN & EN standards Thread types of companion/ screwed or carbon steel threaded flanges Value added services
  • Carbon steel Flat Flange
    Type 1
    DIN 2578, 2573
  • Carbon steel Blind Flange
    Type 5
    DIN 2527
  • CS Weld Neck Flange
    Type 11
    DIN 2627 to 2638
  • CS Threaded Flange
    Type 12
    DIN 2558, 2565, 2566, 2567, 2568, 2569
  • CS Lapped Flange
    Type 2, 4
    DIN 2622, 2641, 2655, 2656
  • NPT – MPT/ MNPT (Male), FPT, FNPT (Female) – ASME B1.20.1
  • BSP – BSPP (Female & male), BSPT (Female)
  • 24-hour emergency service
  • Hot dipped galvanized
  • MTR’s Available
  • Metal stampings
  • Cutting
  • Coating/ polishing
  • Beveling end
  • De-burring
  • Marking tagging
Meet the requirements of Testing requirements Carbon steel flanges manufacturing standards & origin country
  • Sour service
  • NACE MR0175
  • NACE MR0103
  • ISO 15156
  • NACE TM-0284
  • Verify Carbon steel flanges are manufactured as per the work order
  • Material inspection
  • hardness test
  • tensile test
  • impact test
  • visual inspection
  • CS pipe flange dimensional check by ruler, calibrated caliper or tape
  • Dry film thickness check (for coating thickness by an elcometer)
  • shell pressure test
  • Positive Material Identification Test (PMI) – Important test to check chemical composition
  • BS EN 1092-1 (Steel) – Europe
  • BS EN 1092-2 (Iron)- Europe
  • BS EN 1092-3 (Alloy)- Europe
  • ANSI – USA
  • ASME- USA
  • BS 10- UK & Australia
  • PN – Europe
  • DIN- Germany
  • EN- Europe
  • ISO 7005- Europe
  • AWWA – USA
  • JIS – Japan
  • Ghost – Russia
  • KS – Korea
  • MSS SP44 – USA
  • API-605 – USA
  • ASA – USA
  • MS 253 – Malaysia
  • AS 2129 – Australia
  • CL 125 (Light weight) – USA
  • MS 816 – Carbon steel slip on flanges – Malaysia
  • NF E 29-200/ NF E 29-203 – Framce
  • CSA B16.5/ B16.47 – Canada
  • GB/T 9112 / 9119 – China
  • UNI 2276/ 6091 – Italy
Flange ASME standard list HS code for carbon steel forged flanges
  • ASME B16.1 – Gray Iron Flanges and Flanged Fittings: 25, 125, and 250 classes
  • ASME B16.5 – Forged Flanges, NPS 1/2 to 24″
  • ASME B16.20 – Ring Joint Gaskets for Steel Flanges
  • ASME B16.21 – Nonmetallic Flat Gaskets for Steel Flanges
  • ASME B16.24 – Cast Copper Flanges: 150 to 2500 classes
  • ASME B16.36 – Orifice Flanges
  • ASME B16.34 – Large Diameter Flanges (26 to 60 NPS)
  • ASME B16.42 – Ductile Iron Flanges, 150 and 300 class
  • ASME B16.47 – Large Diameter Flanges (26 to 60 NPS)
  • 73079190
Carbon steel flanges grades High pressure carbon steel flanges LTCS/ low temperature carbon steel flanges grades

Carbon steel flange has a much better tensile strength, it lacks the corrosion-resistant properties, Although it’s stronger and more durable than stainless steel. We are Manufacturer of Large Diameter CS Flanges.

Check carbon steel pipe flanges specification, pressure rating, dimensions, grades and price list in India

Low Carbon Steel Flange Price List

Price list of Carbon Steel Flange CS Flange Price in INR CS Flange Price in USD CS Flange Price in UAE Dirham
CARBON STEEL (LWNRTJ) FLANGE CONF. TO SPECN. SA105 SIZE(MM): 150 X 25.40 X 340 Per Piece 1,314 $17.91 UAE Dirham 65.79
CS (BLRTJ) FLANGE CONF. TO SPECN. SA105 SIZE(MM): 150 X 0.00 X 37.95 Per Piece 424 $5.78 UAE Dirham 21.23
FLANGES CS : WN RF, 300#, CL1 STD, GR.SA/A350 LF2 Per Piece 171 $2.33 UAE Dirham 8.56

Carbon Steel Flange Types

Low Temp Carbon Steel Blanks

Low Temp Carbon Steel Blanks

CS Spacer

CS Spacer

Carbon Steel Reducing Flange

CS Reducing Flange

Carbon Steel Spectacle Blind

CS Spectacle Blind

Very High Carbon Steel Weld Neck Flanges

Very High Carbon Steel Weld Neck Flanges

Black Carbon Steel Threaded Flange

Black Carbon Steel Threaded Flange

Low carbon steel Lap Joint Flange

Low carbon steel Lap Joint Flange

Killed Carbon Steel Slip-On Flange

Killed Carbon Steel Slip-On Flange

Plain Carbon Steel Expander Flange

Plain Carbon Steel Expander Flange

Low Temperature Carbon Steel Long weld neck flange

Low Temperature Carbon Steel Long weld neck flange

Low Temperature Carbon Steel Flangeolet / Weldoflange / Nippoflange

Low Temperature Carbon Steel Flangeolet / Weldoflange / Nippoflange

Black Carbon Steel Blind Flange

Black Carbon Steel Blind Flange

High carbon steel Socket Weld Flange

High CS Socket Weld Flange

Low carbon steel Orifice Flange and Plate

Low carbon steel Orifice Flange and Plate

Flage Face Types of Low CS Flanges

Low Temp Carbon Steel Flat Face (FF) Flanges

Low Temp Carbon Steel Flat Face (FF) Flanges

Low Temperature Carbon Steel tongue and groove Flange

Low Temperature Carbon Steel tongue and groove Flange

Killed Carbon Steel male- female Flange

Killed CS male- female Flange

High carbon steel SORF Flanges

High carbon steel SORF Flanges

Low Temp Carbon Steel SWRF Flanges

Low Temp CS SWRF Flanges

CS Ring Joint (RJT) Flanges

CS Ring Joint (RJT) Flanges

Black Steel BLRF Flanges

Black Steel BLRF Flanges

Plain Carbon Steel WNRF Flanges

Plain Carbon Steel WNRF Flanges

Black Steel Raise Face (RF) Flange

Black Steel Raise Face (RF) Flange

Killed Carbon Steel LWNRF Flanges

Killed CS LWNRF Flanges

Carbon Steel RTJ Flanges

Carbon Steel RTJ Flanges

Type of carbon steel flanges in use are as below mentioned:

  • Weld neck carbon steel flanges are having large neck and their connecting end is welded to bottom, wherein internal diameter is similar to the flange and used in extreme conditions.
  • Carbon steel slip on flange is designed to accept pipe into the bore/centre of the flange for welding around outer diameter of the pipe and interior side of connection. Its also good in use in extreme conditions besides being inferior to neck flanges.
  • Carbon steel blind flanges are used in covering the ends of the tube, valves or pipe lines of operating process. Its type of ASME fitting which makes it suitable to resist against extreme conditions of work.
  • Threaded carbon steel flanges though do not have any welding feature but make easy quick assembly and useful for implementations within high temperature and pressure wherein male NPT threaded pipes are used.
  • Carbon steel tongue and groove flange are standard small or large size type in which the inside diameters of the groove and tongue do not extend into the flange base, thus retaining the gasket on its inner and outer diameter.
  • Killed carbon steel flanges are type of forged flange are destroyed in melting process, wherein due to addition of Manganese, Silicon, and Aluminium during the production of steel, deoxidation occurs.

Different Standards Types of CS Flange

ASME B16.5 Low Temperature Carbon Steel Flange

ASME B16.5 Low Temperature Carbon Steel Flange

MSS SP-44 Black Steel Pipe Flange

MSS SP-44 Black Steel Pipe Flange

API 590 Plain Carbon Steel Pipe Flanges

API 590 Plain CS Pipe Flanges

ASME B16.47 Series B Killed Carbon Steel Pipe Flanges

ASME B16.47 Series B Killed Carbon Steel Pipe Flanges

ASME B16.36 Black Steel Pipe Flange

ASME B16.36 Black Steel Pipe Flange

ASME B16.45 High carbon steel Flanges

ASME B16.45 High CS Flanges

ASME B16.47 Series A Very High Carbon Steel Flanges

ASME B16.47 Series A Very High Carbon Steel Flanges

API 605 Black Carbon Steel Flange

API 605 Black Carbon Steel Flange

Various Types of Pressure Class of Quenching Carbon Steel Flanges

Class 600 CS Flange

Class 600 CS Flange

Class 2500 Carbon Steel Flanges

Class 2500 Carbon Steel Flanges

Class 400 Low carbon steel Plate Flange

Class 400 Low carbon steel Plate Flange

Class 150 Very High Carbon Steel Forged Flanges

Class 150 Very High Carbon Steel Forged Flanges

Class 900 Low Temp Carbon Steel Flanges

Class 900 Low Temp Carbon Steel Flanges

Class 1500 Black Carbon Steel Pipe Flange

Class 1500 Black CS Pipe Flange

Class 300 CS Pipe Flanges

Class 300 CS Pipe Flanges

Weight Chart of Low Temperature Carbon Steel Flanges

Standard Class Diameter of Bolt Hole Bolt Circle Diameter Diameter Number of Bolts Bolt Size
ANSI B16.5 ANSI 150 16 60 89 4 13
ANSI 300 16 67 95 4 13
ANSI 600 16 67 95 4 13
ANSI 900 22 83 121 4 19
ANSI 1500 22 83 121 4 19
AS 2129 Flanges Table C 14 67 95 4 13
Table D 14 67 95 4 13
Table E 14 67 95 4 13
Table F 14 67 95 4 13
Table H 17 83 114 4 16
Table J 17 83 114 4 16
ISO 7005 (DIN) Flange PN6 11 55 80 4 M10
PN10 14 65 95 4 M12
PN16 14 65 95 4 M12
PN20 16 60.5 90 4 M14
PN25 14 65 95 4 M12
PN40 14 65 95 4 M12
AS4087 PN14 14 67 95 4 M12
Know the manufacturing process of carbon steel forged flanges and CS plate flange, wide selection of low temp carbon steel flanges in class 150-2500

Carbon steel forged flanges are manufactured using forging machines wherein steel bars are heated and shaped under high pressure and temperature.
It allows for flange dimension and shape customization, mostly applicable for high pressure, high temperature, critical applications of chemical, petrochemical, oil and gas industry.

Carbon steel plate flange are flat flanges made by cut and drilled according to flange dimension. The bolt holes are thin and lighter used in low pressure and non-critical applications like water supply, irrigation and HVAC systems. Forged carbon steel flanges are better than plate flange in aspect of corrosive properties, meanwhile plate flanges are less expensive than forged flanges.

Chemical Equation Of CS Forged Flange

Element
Weight %
Carbon
0.08 – 0.15
Silicon
0.15 – 0.50
Manganese
0.30 – 0.60
Phosphorus
0.025 max *
Sulphur
0.025 max *
Molybdenum
0.90 – 1.10
Chromium
2.00 – 2.50
Nickel
0.5 max

Mechanical Properties Of Carbon Steel Forged Flange

Property
Values
Ultimate Tensile Strength *
95 min Ksi (655 Mpa)
0.2 % Yield Strength *
75 min Ksi (517 Mpa)
Elongation *
17 % min
Reduction of Area *
35 % min
Charpy Impact Toughness
42 mean/ 33 min J at –18o C
Hardness
197 – 237 BHN (75 Ksi min)

We are Manufacturer of ANSI B16.5 Carbon Steel Blind Flange Which is Highly durable, flexible and long-lasting.

Quenching CS Flange Pressure Ratings

Flanges pressure rating in psig for common CS ASME flanges
( A105 / A350 LF2 / A350 LF3 / A350 LF6)
Temperature (F°)
150#
300#
400#
600#
900#
1500#
2500#
-20 to 100
285
740
985
1480
2220
3705
6170
200
260
680
905
1360
2035
3395
5655
300
230
655
870
1310
1965
3270
5450
400
200
635
845
1265
1900
3170
5280
500
170
605
805
1205
1810
3015
5025
600
140
570
755
1135
1705
2840
4730
650
125
550
730
1100
1650
2745
4575
700
110
530
710
1060
1590
2655
4425
750
95
505
675
1015
1520
2535
4230
800
80
410
550
825
1235
2055
3430
850
65
320
425
640
955
1595
2655
900
50
230
305
460
690
1150
1915
950
35
135
185
275
410
685
1145
1000
20
85
115
170
255
430
715
Exporter & supplier of threaded, slip on & weld neck carbon steel flanges in India, view advantages and installation process

Carbon steel pipe flanges are mode of connecting for 2 particular pipe line joints section, an advantage of such flanges is that they are convenient for welding and processing with high strength. Such connections are affordable for future disconnecting, reconnecting and zero-clearance assembly for easier maintenance activities, tube and hose connection.

Carbon steel flange are installed via welding, screwing, or lapping and in installation of flange, initially flange is placed in the pipe end, welding ring is then welded in pipe end, welding sky further is used as the sealing surface and tighten the two flanges to connect the pipe fittings. Also, some safety concern and plant external as well as internal pipe line units are considered like shutdowns and change of flow directions and others are to be known before work proceeds.

Grades Material of CS Flange

Material Size (mm) SCH/ CLASS Type Specification Manufacturing Method
CS/LTCS Flange 15NB to 600NB ASME Standard B16.5 150#, 300#, 900#, 1500#, 2500# Weld Neck, SORF, BLIND, SWRF, RING JOINT A182/A105/ A350LF FORGED
CS/LTCS Flange 650NB to 1500NB
ASME B16.47
SER.B (API 605)
Class 75/150/300 Weld Neck, BLIND A182/A105/ A350LF FORGED
CS/LTCS Flange 650NB to 1500NB
ASME/ANSI B16.47
SER.A (MSS SP 44)
Class 150/300/600 Weld Neck, BLIND A182/A105/ A350LF FORGED
CS/LTCS Flange 10NB to 1500NB
JIS & KS Flanges
Class 5K, 10K, 16K, 20K, 30K SLIP ON, WELD NECK A182/A105/ A350LF FORGED/PLATE
CS/LTCS Flange 10NB to 1000NB
DIN Flanges
Class 6Bar, 10Bar, 16Bar, 25Bar, 40Bar SLIP ON, BLIND, WELD NECK A182/A105/ A350LF FORGED/PLATE
CS/LTCS Flange 650NB to 900NB
BS 3293 Flanges
150lb/sq.in, 300lb/sq.in., 600lb/sq.in WELD NECK A182/A105/ A350LF FORGED
CS/LTCS Flange 1000NB to 3000NB
AWWA C207 Flanges
Table 1
*Class B (86 PSI)
*Class D(150-175PSI)
SLIP ON FF, BLIND FF A182/A105/ A350LF FORGED/PLATE
Table 2
*Class B (86 PSI)
*Class D(150-175PSI)
SLIP ON FF WITH HUB, BLIND FF A182/A105/ A350LF FORGED
Table 3
*Class E (275 PSI)
SLIP ON FF WITH HUB, BLIND FF A182/A105/ A350LF FORGED

Most Selling CS flange

Carbon Steel Loose Flanges

Carbon Steel Loose Flanges

Carbon Steel AS 4087 Water Flanges

CS AS 4087 Water Flanges

Ansi 150 Carbon Steel Flanges

Ansi 150 Carbon Steel Flanges

MSS SP-44 Carbon Steel SW Flange, PN150, RF

MSS SP-44 Carbon Steel SW Flange, PN150, RF

Carbon Steel Pipe Flanges

Carbon Steel Pipe Flanges

Carbon Steel Blind Flanges

CS Blind Flanges

Carbon Steel Screwed Flanges

Carbon Steel Screwed Flanges

Carbon Steel Reducing Flanges

Carbon Steel Reducing Flanges

carbon steel blind flange

carbon steel blind flange

Carbon Steel Lap Joint Flanges

Carbon Steel Lap Joint Flanges

Class 600 Carbon Steel Flanges

Class 600 Carbon Steel Flanges

Carbon Steel Socket Weld Flanges

Carbon Steel Socket Weld Flanges

Raised Face Weld Neck Flange, ANSI B16.5, A105, PN50, DN200

Raised Face Weld Neck Flange, ANSI B16.5, A105, PN50, DN200

Carbon Steel Large Diameter Flanges

Carbon Steel Large Diameter Flanges

Carbon Steel Long Weld Neck Flanges

Carbon Steel Long Weld Neck Flanges

Weld Neck Orifice Flange, 12 Inch, 300#, RF, Carbon Steel

Weld Neck Orifice Flange, 12 Inch, 300#, RF, Carbon Steel

class 150 carbon steel flange

class 150 carbon steel flange

Carbon Steel Square Flanges

Carbon Steel Square Flanges

Carbon Steel Socketweld Flanges

Carbon Steel Socketweld Flanges

Carbon Steel Table Flanges

Carbon Steel Table Flanges

Carbon Steel Orifice Flanges

Carbon Steel Orifice Flanges

ANSI B16.47 Carbon Steel Pipe Flanges

ANSI B16.47 Carbon Steel Pipe Flanges

SCH STD 900LB Orifice Welded Neck Flanges

SCH STD 900LB Orifice Welded Neck Flanges

Carbon Steel Threaded Flanges

CS+-
Threaded Flanges

carbon steel spectacle blind flange

carbon steel spectacle blind flange

ASTM A694 Carbon Steel Slip-On Flange

ASTM A694 CS Slip-On Flange

Carbon Steel Exhaust Flanges

Carbon Steel Exhaust Flanges

Carbon Steel Class 150 Flanges

Carbon Steel Class 150 Flanges

Carbon Steel Threaded Flange, 150 LB, 1/2IN, RF

Carbon Steel Threaded Flange, 150 LB, 1/2IN, RF

Carbon Steel Puddle Flanges

Carbon Steel Puddle Flanges

Carbon Steel Plate Flanges

Carbon Steel Plate Flanges

Carbon Steel Sorf Flanges

Carbon Steel Sorf Flanges

Carbon Steel Slip On Flanges

CS Slip On Flanges

Carbon Steel Slip-On Flanges

Carbon Steel Slip-On Flanges

Carbon Steel RTJ Flanges

Carbon Steel RTJ Flanges

Carbon Steel Weld Neck Flanges

CS Weld Neck Flanges

Ready Stock of Low CS Flanges

A105 Carbon Steel RTJ Flanges
CS A105 BLRF Flanges
CS A105 SORF Flanges
Carbon Steel A350 Split Flanges
CS A105 Puddle Flanges
ASME SA105 Carbon Steel Reducing Flanges
CS SAE Flanges
ASTM A694 CS Exhaust Flanges
CS Screwed Flanges
ASME SA105 CS Tank Flanges
CS A694 Flanges
Carbon Steel WNRF Flanges
CS Flanges
EN 1092-1 Flanges

Product Range & Standards of Carbon Steel Flange

Product Form Standards
Forged Flanges ASME B16.5, ASME B16.47, MSS SP 44, EN 1092-1,
NORSOK L-005, BS 4504, ASME B16.48, ASME B16.36
Forged Fittings ASME B16.11, BS 3799, MSS SP 83, MSS SP 95,
MSS SP 97, GB/T14383, GB/T14626
Valve & Valve Parts ASME B16.34, API 600, API 602
Boiler & Pressure Vessel ASME Section IX

We Are PED approved ANSI B16.48 Carbon Steel Long Weld Neck Flange Manufacturer in India

We export in below contry also find estimated delivery time

Export Location WNRF FLANGE 150# A105 SCH STD
Size
Price Estimated delivery days
Ukraine 1/2″ US $4.583 60
Netherland 3/4″ US $4.767 30
Egypt 1″ US $5.317 18
Greece 1-1/4″ US $6.417 45
Czech Republic 1-1/2″ US $7.150 45
Slovakia 2″ US $8.250 45 to 60
Finland 2-1/2″ US $11.917 45 to 60
Croatia 3″ US $12.833 60
Slovenia 4″ US $17.417 60
Turkey 5″ US $33.000 21
Belgium 6″ US $36.667 40
Switzerland 8″ US $51.333 45 to 60
Ireland 10″ US $64.167 60
Albania 12″ US $91.667 45
Austria 14″ US $174.167 60
Singapore 16″ US $192.500 8
Azerbaijan 18″ US $265.833 30 to 45
Libya 20″ US $339.167 45 to 60
Portugal 24″ US $375.833 45