Dinesh Industries > Copper Nickel 70/30 Pipe Fittings

Copper Nickel 70/30 Pipe Fittings

Copper-nickel fittings are made up of copper, nickel, along with a few traces of manganese and iron. The Copper Nickel 70/30 Pipe Fittings are made up of 70% of copper and 30% of nickel. These elements give these fittings high corrosion resistance properties. They also give these elements good thermal resistance in different temperatures. They are widely used in a condenser, electronic and electric products, power plants, marine industries, etc. We are amongst the leading Copper Nickel 70/30 Pipe Fittings manufacturers and suppliers in the country. Our institution aims at providing our customers with the best products at reasonable rates.

Copper Nickel 70/30 Pipe Fittings

Copper Nickel 70/30 Pipe Fittings

ASTM B366 UNS C71500 Tee

ASTM B366 UNS C71500 Tee

Cu-Ni 70/30 Elbow

Cu-Ni 70/30 Elbow

70/30 copper nickel Stub End

70/30 copper nickel Stub End

UNS C71500 Buttweld Fittings

UNS C71500 Buttweld Fittings

DIN 2.0882 End Cap

DIN 2.0882 End Cap

Top notch ASTM B366 UNS C71500 Tee Manufacturer in India, Refer Weight Chart and Sizes of Cu-Ni 70/30 Elbow/ Reducer

The ASTM B366 UNS C71500 Tee is made up of 3 openings. This allows the supply of fluids or gases using 3 ends. These tees are available as equal or reduced tees. The Copper Alloy 70/30 Reducer is used to connect pipes of different sizes in hydraulic systems. These reducers are also used when the flow of certain fluids or gases is increased in piping systems. All our UNS C71500 Buttweld Fittings can be customized as per our client’s requirements in different shapes and sizes.

Cu-Ni 70/30 Elbow facilitates the change of direction in piping systems. These elbows are available either in long or short radiuses. They are available in nominal pipe sizes of ½ to 48. DIN 2.0882 End Cap is used to close and avoid leakage in hydraulic systems. These caps also act as a protection unit when pipes are transported or stored. The 70/30 copper nickel Stub End is used along with a backing flange. Our experienced staff makes use of cutting-edge technology and the best raw materials to produce high-quality products. If you have any queries about our products, pricing, contact us to know more.

Material Specification of Copper Nickel 70/30 Pipe Fittings

size Welded Fittings: 1/2″ – 48″

Seamless Fittings: 1/2″ – 10″

Key markets and industries
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Petrochemicals and acids.
  • Nuclear power (mostly seamless).
Specialized manufacturer of Crosses, Reducers, Pipe Cap, 90º Elbows, 45º Elbows, Tee, Stub End, Pipe Bend
Thickness SCH30, STD SCH40, SCH60, SCH10, SCH20, XS, SCH 80, SCH 140, SCH 160, SCH 100, SCH 120, XXS available with NACE MR 01-75
Export to Tau, Perth, Howrah, Melbourne, Rajkot, Chennai, Ahvaz, Mumbai, Riyadh, Manama, Lagos, Nagpur, Caracas, Ranchi, Muscat, London, Baroda, Gujarat, Calgary, Dammam, Santiago, Gimhae-si, Abu Dhabi, Kuwait, Courbevoie, New Delhi, Port-of-Spain, Janeiro, Kolkata, Thiruvananthapuram, Kanpur, Istanbul, Vadodara, Gurgaon, Ludhiana, Mexico, Surat, Ahmedabad, Bengaluru, Bogota, Hyderabad, Ludhiana, Tehran, Ernakulam, Jamshedpur, Noida, Indore, Coimbatore, Ankara, Pimpri-Chinchwad, Montreal, Khobar, Sydney, Bangalore
Bending Radius R=1D, 2D, 5D, 6D, 8D, 3D, 10D or Custom MSS Sp-43
Elbows Angle : 3D, 4D, 5D, 6D, 1.0D, 1.5D, 2.0D, 2.5D, 7D-40D .
Standard: ASME B16.9, MSS SP-75 JISB2312 JISB2313, 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, DIN2605 JISB2311 BS, GB,
ISO
Dimensions ASME/ANSI B16.9, BS4504, ASME B16.28, MSS-SP-43, BS4504, BS1560, BS10
Manufacturing process Press, Forge, Push, Cast, etc.
Origin & Mills Korean, European, Japanese, Indian, USA, Ukraine, Russian
Test Certificates Raw Materials Certificate
EN 10204/3.1B
100% Radiography Test Report
Third Party Inspection Report, etc
Type DN15-DN1200
Connection Welding

Check 70/30 copper nickel Stub End Dimensions & Weight charts, Biggest Supplier of UNS C71500 Buttweld Fittings

Prices of 70/30 copper nickel Pipe Fittings

Copper Nickel 70/30 Pipe Fittings Price in India Cupro Nickel 70/30 Fittings Price in INR Cuni 70/30 Fittings Price in USD 70/30 Copper Alloy Fittings Price in UAE Dirham
70/30 COPPER NICKEL PIPE FITTINGS 133 X 108/3 X 3MM BW RED.TEE Per Kg Rs. 1,577 US $21.20 UAE Dirham 77.89

Ready Stock of DIN 2.0882 End Cap, Top-notch Manufacturer of Copper Alloy 70/30 Weld Fittings

ASTM B366 UNS C71500 Degrees Elbow Joint

Werkstoff 2.0882 Elbow 180deg. SR

Werkstoff 2.0882 Elbow 180deg. SR

B366 Uns C70600 90 Degree Elbow

B366 Uns C70600 90 Degree Elbow

Cuni 70/30 C71500 45 Degree Elbow

Cuni 70/30 C71500 45 Degree Elbow

Copper Alloy C71500 Elbow 180deg. LR

Copper Alloy C71500 Elbow 180deg. LR

WNR 2.0882 Elbow 90deg. SR

WNR 2.0882 Elbow 90deg. SR

C71500 Copper Nickel 180 Degree Elbow

C71500 Copper Nickel 180 Degree Elbow

UNS C71500 Elbow 45deg. LR

UNS C71500 Elbow 45deg. LR

ASTM B366 C70600 Elbow 90deg. LR

ASTM B366 C70600 Elbow 90deg. LR

Various Types of Copper Alloy 70/30 Elbow

SCH80 high pressure 70/30 copper elbow

SCH80 high pressure 70/30 copper elbow

Werkstoff 2.0882 Miter Bend

Werkstoff 2.0882 Miter Bend

Copper-nickel Alloy C71500 LR Elbow

Copper-nickel Alloy C71500 LR Elbow

Butt welded copper alloy 70/30 LR Seamless elbows

Butt welded copper alloy 70/30 LR Seamless elbows

C71500 Alloy Reducing Elbow

C71500 Alloy Reducing Elbow

Cuni 70/30 C71500 SR Elbow

Cuni 70/30 C71500 SR Elbow

70/30 copper nickel welded elbows

70/30 copper nickel welded elbows

C71500 Copper Nickel ASME B16.9 SCH 40 elbow

C71500 Copper Nickel ASME B16.9 SCH 40 elbow

70/30 copper Buttweld Elbow

70/30 copper Buttweld Elbow

C71500 Alloy Return Bends

C71500 Alloy Return Bends

sch 40 90 degree copper nickel 70/30 seamless Pipe Elbows

sch 40 90 degree copper nickel 70/30 seamless Pipe Elbows

Check available sizes of 70/30 copper alloy Concentric/ Eccentric Reducer, Get a best quote for Cu-Ni 70/30 Long Radius Elbow from leading manufacturers

Different Types of Cu-Ni 70/30 Pipe Bend

ASTM B366 UNS C70600 short radius bend

ASTM B366 UNS C70600 short radius bend

SB366 C70600 Hot Induction Bend

SB366 C70600 Hot Induction Bend

Copper Alloy C71500 5D Pipe Bend

Copper Alloy C71500 5D Pipe Bend

copper nickel alloy 70/30 1D Pipe Bend

copper nickel alloy 70/30 1D Pipe Bend

70/30 copper alloy 1.5D Pipe Bend

70/30 copper alloy 1.5D Pipe Bend

Copper-nickel Alloy C71500 180º Bends

Copper-nickel Alloy C71500 180º Bends

Cuni C71500 2D  Pipe Bend

Cuni C71500 2D Pipe Bend

Cuni C71500 3D  Pipe Bend

Cuni C71500 3D Pipe Bend

DIN 2.0882 long radius bend

DIN 2.0882 long radius bend

DIN 2.0882 10D Pipe Bend

DIN 2.0882 10D Pipe Bend

Composition Standard of DIN 2.0882 End Cap

Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 70/30 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max

Mechanical Strength of Cu-Ni 70/30 Long Radius Elbow

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Buy Copper Nickel 70/30 Reducing Tee directly from Suppliers, Specialise in distributing UNS C71500 Weld Fittings

70/30 copper alloy Reducer Equivalent Material

STANDARD WERKSTOFF NR. UNS
Cupro Nickel 70/30 2.0882 C70600

Pressure Rating of Copper Nickel 70/30 Pipe Fittings

Pipe Size
(inches)
Pipe Schedule Outside
Diameter

(in)
Wall
Thickness

(in)
Temperature (oF) 
100 200 300 400 500 600 650 700 750
Allowable Stress (psi) 
16700 16700 16700 15500 14400 13500 13200 12900 12600
1″ 40 1.315 0.133 2205 2205 2205 2047 1902 1783 1743 1703 1664
80 1.315 0.179 3061 3061 3061 2841 2640 2475 2420 2365 2310
160 1.315 0.250 4493 4493 4493 4170 3874 3632 3552 3471 3390
1 1/2″ 40 1.900 0.145 1629 1629 1629 1512 1404 1317 1287 1258 1229
80 1.900 0.200 2303 2303 2303 2138 1986 1862 1821 1779 1738
160 1.900 0.281 3362 3362 3362 3120 2899 2717 2657 2597 2536
2″ 40 2.375 0.154 1371 1371 1371 1272 1182 1108 1083 1059 1034
80 2.375 0.218 1985 1985 1985 1843 1712 1605 1569 1534 1498
160 2.375 0.344 3283 3283 3283 3047 2831 2654 2595 2536 2477
3″ 40 3.500 0.216 1301 1301 1301 1208 1122 1052 1028 1005 982
80 3.500 0.300 1844 1844 1844 1712 1590 1491 1458 1425 1391
160 3.500 0.438 2787 2787 2787 2587 2403 2253 2203 2153 2103
4″ 40 4.500 0.237 1102 1102 1102 1023 950 891 871 851 831
80 4.500 0.337 1596 1596 1596 1482 1377 1291 1262 1233 1204
160 4.500 0.531 2611 2611 2611 2424 2552 2111 2064 2017 1970
5″ 40 5.563 0.258 965 965 965 896 832 780 763 746 728
80 5.563 0.375 1428 1428 1428 1325 1231 1154 1129 1103 1077
160 5.563 0.625 2474 2474 2474 2296 2133 2000 1955 1911 1866
6″ 40 6.625 0.280 877 877 877 814 756 709 693 677 661
80 6.625 0.432 1379 1379 1379 1280 1189 1115 1090 1065 1040
160 6.625 0.719 2382 2382 2382 2211 2054 1925 1883 1840 1797
8″ 40 8.625 0.322 771 771 771 716 665 623 610 596 582
80 8.625 0.500 1218 1218 1218 1131 1050 985 963 941 919
160 8.625 0.906 2298 2298 2298 2133 1982 1858 1817 1775 1734
10″ 40 10.750 0.365 699 699 699 649 603 565 553 540 528
80 10.750 0.594 1159 1159 1159 1075 999 937 916 895 874
160 10.750 1.125 2289 2289 2289 2124 1974 1850 1809 1768 1727

UNS C71500 Buttweld Fittings Sizes

Nominal
Pipe

Size
Outside
Diameter
90° Elbows 45° Elbows 180° Returns
(inches)
Long Radius
Short Radius
Long Radius
Long Radius
(mm)
(inches)
Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2
21.3
0.840
1 1/2
5/8
2
1 7/8
3/4
26.7
1.050
1 1/8
7/16
2 1/4
1 11/16
1
33.4
1.315
1 1/2
1
7/8
3
2 3/16
1 1/4
42.2
1.660
1 7/8
1 1/4
1
3 3/4
2 3/4
1 1/2
48.3
1.900
2 1/4
1 1/2
1 1/8
3
4 1/2
3 1/4
2
60.3
2.375
3
2
1 3/8
4
6
4 3/16
2 1/2
73.0
2.875
3 3/4
2 1/2
1 3/4
5
7 1/2
5 3/16
3
88.9
3.500
4 1/2
3
2
6
9
6 1/4
3 1/2
101.6
4.000
5 1/4
3 1/2
2 1/4
7
10 1/2
7 1/4
4
114.3
4.500
6
4
2 1/2
8
12
8 1/4
5
141.3
5.563
7 1/2
5
3 1/8
10
15
10 5/16
6
168.3
6.625
9
6
3 3/4
12
18
12 5/16
8
219.1
8.625
12
8
5
12
24
16 5/16
10
273.1
10.750
15
10
6 1/4
15
30
20 3/8
12
323.9
12.750
18
12
7 1/2
18
36
24 3/8

Weight Chart of Copper Nickel 70/30 Pipe Fittings

Weight Chart of Copper Nickel 90/10 Fittings

Check What and Where We Supplied Our Materials

70/30 Cupro Nickel 180 Deg bend NY 12203 (USA), Singapore, South Korea, Malaysia
Cupro Nickel UNS C71500 Buttweld Fitting UK, Philippines, Australia, Nigeria
ASTM B366 Cu-Ni 70/30 Cupro Nickel Buttweld Fitting Europe, Qatar, France, Thailand
70/30 Cu-Ni Pipe Reducer Singapore, Bahrain, South Africa, Singapore
Cu-Ni UNS C71500 Lateral Tee Los Alamos -Mexico, Malaysia, Taiwan, Philippines
ASTM B366 Cupro Nickel 70/30 90 degree Elbow Thailand, Czechia, Germany, Malaysia
MSS-SP-43 Cu-Ni Short Stub End Canada, Philippines, Malaysia, Singapore
Cu-Ni UNS C71500 Seamless Pipe Fittings Mexico, Egypt, Spain, UK
Cu-Ni 70/30 Copper Nickel Alloy Eccentric Reducer Iran, Chile, Italy, Singapore
Cupro Nickel WERKSTOFF NR. 2.0882 Equal Tee Norway, United Arab Emirates (UAE), Turkey, Malaysia
ASTM B366 70/30 Cupro Nickel Long Stub End Malaysia, United Kingdom -UK, Europe, UAE
ANSI B16.9 Copper Nickel Buttweld Elbow Philippines, Dammam -KSA, Indonesia, Belgium
Cu-Ni WERKSTOFF NR. 2.0882 Bend Malaysia, Sweden, Colombia, China
ASTM B122 Copper Nickel Cu-Ni 70/30 Welded Fittings Romania, Europe, Japan, Malaysia
UNS C71500 Cu-Ni UNS C71500 Seamless Fittings Poland, UK, Canada, Ellington -United States
CuproNickel 70/30 5D Elbows Hong Kong, Oman, Malaysia, UAE
ANSI B16.9 WP 70/30 Cupro Nickel Equal Cross Kuwait, South Africa, Saudi Arabia (KSA), Brazil
ASME SB366 70/30 90 Degree Elbow Russia, Netherlands, Malaysia, Dubai
Copper Nickel 70/30 Hot Induction Pipe Bend Bangladesh, Malaysia, USA, Finland