Copper pipe fittings have an appealing look. These fittings are highly corrosion resistant and don’t deform under extreme temperatures. They possess good mechanical properties and are durable. Apart from this, they possess good strength. They are widely used in plumbing, service line piping systems, refrigerant lines, etc. We are amongst the leading Copper Pipe Fittings Manufacturers In India. We ensure that the products we produce are top quality and available at feasible rates to all.
Copper Pipe Fittings
ASTM B62 Cu Elbow
UNS C12200 Reducer
Copper Reducing Tee
Astm B62 Cu Buttweld Fittings
Copper End Cap
The ASTM B62 Cu Elbow is used to change the direction of flow in various piping systems. These elbows can be connected to nearly all stainless pipes. The elbows can be changed mostly in 45, 90 and 180 degrees. The Copper 90 Degree Elbow is known as a quarter degree elbow. These elbows are produced in different dimensions to suit different applications. Our experienced crew ensures that we use the best raw materials while producing the best Astm B62 Cu Buttweld Fittings using the latest technology. This is done following all industrial standards.
The UNS C12200 Reducer is used to connect pipes of different shapes. They are used when the flow is reduced or increased in piping systems. These reducers are available either as concentric or eccentric. The Copper Reducing Tee is made up of 3 female openings, amongst which the branch port or some other ports are reduced in size. To stop flow in hydraulic systems, the Copper End Cap is made use of. This cap protects the pipe from corrosion due to water build up and damage caused during transportation. All our products are easy to customize in different shapes and sizes to meet all your requirements. If you have any queries about our copper pipe fittings or any other products, contact us.
Copper Fittings Manufacturer
Size Range | Welded Fittings: 1/2″ – 48″
Seamless Fittings: 1/2″ – 10″ |
---|---|
Bending Radius | R=8D, 3D, 10D, 1D, 2D, 5D, 6D or Custom MSS Sp-43 |
Elbows | Angle : 3D, 4D, 5D, 6D, 1.0D, 1.5D, 2.0D, 2.5D, 7D-40D . Standard: MSS SP-75 JISB2312 JISB2313, ASME B16.9, 22.5 deg, 30deg, 45 deg, 90 deg, DIN2605 JISB2311 BS, 180 deg, GB, ISO |
Specialized manufacturer of | 90º Elbows, Tee, Stub End, Pipe Cap, Crosses, 45º Elbows, Reducers, Pipe Bend |
Thickness | SCH 140, SCH 160, SCH10, SCH30, STD SCH40, SCH20, XS, SCH 80, SCH60, SCH 100, SCH 120, XXS |
Dimensions | ASME/ANSI B16.9, BS4504, ASME B16.28, MSS-SP-43, BS4504, BS1560, BS10 |
Manufacturing process | Press, Forge, Push, Cast, etc. |
Origin & Mills | Japanese, Korean, European, Indian, USA, Ukraine, Russian |
Type | DN15-DN1200 |
Connection | Welding |
Test Certificates | Raw Materials Certificate EN 10204/3.1B Third Party Inspection Report, etc |
Copper Pipe Fittings Price in India | UNS C12200 Fittings Price in INR | ASTM B62 Cu Fittings Price in USD | Copper Fittings Price in UAE Dirham |
COPPER PIPE FITTINGS – A611 22 TEE EQUAL Per KG | Rs. 736 | US $9.90 | UAE Dirham 36.36 |
copper elbow fitting
copper 90 degree elbow
45 degree copper elbow
22.5 degree copper elbow
copper tee
copper reducing tee
copper 4 way tee
copper reducer
copper reducer 1/2 to 3/8
ASTM B62 Copper Short Radius elbow
copper tube reducer
copper end cap
copper compression fittings
copper press fittings
copper crimp fittings
C12200 copper Long Radius Elbow
Standard | Copper NO. | Chemical Composition | Mechanical Properties | ||||
---|---|---|---|---|---|---|---|
CU% | P% | Temper | Tensile strength (Mpa) | Elongation (%) | Average Grain Size (mm) | ||
ASTM B280/68 |
C12200 | >99.9 | 0.015 to 0.040 | >60 | >205 | >40 | >0.040 |
>50 | >245 |
Nominal Size (in) |
Equivalent Length (feet) | |||||||
---|---|---|---|---|---|---|---|---|
90o Elbow | 45o Elbow | Line 90o Tee | Branch 90o Tee | Ball Valve | Gate Valve | Butterfly Valve | Check Valve | |
3/8 | 0.5 | 1.5 | 1.5 | |||||
1/2 | 1 | 0.5 | 2 | 2 | ||||
5/8 | 1.5 | 0.5 | 2 | 2.5 | ||||
3/4 | 2 | 0.5 | 3 | 3 | ||||
1 | 2.5 | 1 | 4.5 | 0.5 | 4.5 | |||
1 1/4 | 3 | 1 | 5.5 | 0.5 | 0.5 | 5.5 | ||
1 1/2 | 4 | 1.5 | 7 | 0.5 | 0.5 | 6.5 | ||
2 | 5.5 | 2 | 9 | 0.5 | 0.5 | 0.5 | 7.5 | 9 |
2 1/2 | 7 | 2.5 | 12 | 0.5 | 1 | 10 | 11.5 | |
3 | 9 | 3.5 | 15 | 1 | 1.5 | 15.5 | 14.5 | |
3 1/2 | 9 | 3.5 | 14 | 1 | 2 | 12.5 | ||
4 | 12.5 | 5 | 21 | 1 | 2 | 16 | 18.5 |
NPS (inch) |
Pipe Sch. | Wall Thk. (in) |
OD (inch) |
Temperature | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
100 | 200 | 300 | 400 | 500 | ||||||||
Allowable Stress (Pressure Rating) | ||||||||||||
16700 | 16700 | 16700 | 15500 | 14400 | ||||||||
1″ | 40 | 0.133 | 1.315 | 2205 | 2205 | 2205 | 2047 | 1902 | ||||
80 | 0.179 | 1.315 | 3061 | 3061 | 3061 | 2841 | 2640 | |||||
160 | 0.250 | 1.315 | 4493 | 4493 | 4493 | 4170 | 3874 | |||||
1 1/2″ | 40 | 0.145 | 1.900 | 1629 | 1629 | 1629 | 1512 | 1404 | ||||
80 | 0.200 | 1.900 | 2303 | 2303 | 2303 | 2138 | 1986 | |||||
160 | 0.281 | 1.900 | 3362 | 3362 | 3362 | 3120 | 2899 | |||||
2″ | 40 | 0.154 | 2.375 | 1371 | 1371 | 1371 | 1272 | 1182 | ||||
80 | 0.218 | 2.375 | 1985 | 1985 | 1985 | 1843 | 1712 | |||||
160 | 0.344 | 2.375 | 3283 | 3283 | 3283 | 3047 | 2831 | |||||
3″ | 40 | 0.216 | 3.500 | 1301 | 1301 | 1301 | 1208 | 1122 | ||||
80 | 0.300 | 3.500 | 1844 | 1844 | 1844 | 1712 | 1590 | |||||
160 | 0.438 | 3.500 | 2787 | 2787 | 2787 | 2587 | 2403 | |||||
4″ | 40 | 0.237 | 4.500 | 1102 | 1102 | 1102 | 1023 | 950 | ||||
80 | 0.337 | 4.500 | 1596 | 1596 | 1596 | 1482 | 1377 | |||||
160 | 0.531 | 4.500 | 2611 | 2611 | 2611 | 2424 | 2552 | |||||
5″ | 40 | 0.258 | 5.563 | 965 | 965 | 965 | 896 | 832 | ||||
80 | 0.375 | 5.563 | 1428 | 1428 | 1428 | 1325 | 1231 | |||||
160 | 0.625 | 5.563 | 2474 | 2474 | 2474 | 2296 | 2133 | |||||
6″ | 40 | 0.280 | 6.625 | 877 | 877 | 877 | 814 | 756 | ||||
80 | 0.432 | 6.625 | 1379 | 1379 | 1379 | 1280 | 1189 | |||||
160 | 0.719 | 6.625 | 2382 | 2382 | 2382 | 2211 | 2054 | |||||
8″ | 40 | 0.322 | 8.625 | 771 | 771 | 771 | 716 | 665 | ||||
80 | 0.500 | 8.625 | 1218 | 1218 | 1218 | 1131 | 1050 | |||||
160 | 0.906 | 8.625 | 2298 | 2298 | 2298 | 2133 | 1982 | |||||
10″ | 40 | 0.365 | 10.750 | 699 | 699 | 699 | 649 | 603 | ||||
80 | 0.594 | 10.750 | 1159 | 1159 | 1159 | 1075 | 999 | |||||
160 | 1.125 | 10.750 | 2289 | 2289 | 2289 | 2124 | 1974 |