Pipe fittings help connect pipes of different shapes and sizes in piping systems. The IBR approved pipe fittings are produced following the Indian Boiler Regulation. These fittings are known for their superior strength and hardness. They are highly resistant to adverse temperatures and all forms of corrosion. The exemplary mechanical properties it has allows it to be used in high-pressure piping systems. These fittings are widely used in chemical, oil, and gas industries along with nuclear power plants. We are amongst the top ibr approved pipe fittings manufacturers in India. Our institution thrives to produce high-quality products at the most reasonable rates.
IBR approved pipe fittings
IBR approved Elbow
IBR Equal Reducer
IBR Approved End Cap
IBR Equal Tee
IBR Buttweld Pipe Fittings
The IBR approved Elbow helps change the flow of gases and fluids in a piping system. These elbows connect nearly all pipes and are available in NPS ½ to NPS 48. They are available in either a long or short radius. We rank amongst a few ibr approved pipe fittings manufacturer who offer customized fittings in different shapes and sizes.
The IBR Approved End Cap covers the end of a pipe. These fittings act as a piece of protective equipment when pipes are transported from place to place. The caps are also used as devices to seal the hydraulic flow in a piping system. They can also be welded permanently to the pipe. The IBR Equal and Reducing Tee is made up of 3 openings in the shape of a T. These tees help connect 3 pipes of equal or unequal diameter. They possess good ductility and high tensile strength. Our experienced workers make use of the best raw materials and the latest technology while producing all our top-quality products. If you want to know more about our IBR-approved pipe fittings or any other products, contact us.
IBR Fittings Manufacturer
Size Range | Welded Fittings: 1/2″ – 48″
Seamless Fittings: 1/2″ – 10″ |
---|---|
Specialized manufacturer of | 90º Elbows, Tee, Stub End, Pipe Cap, Crosses, 45º Elbows, Reducers, Pipe Bend |
Thickness | SCH 140, SCH 160, SCH10, SCH30, STD SCH40, SCH20, XS, SCH 80, SCH60, SCH 100, SCH 120, XXS |
Bending Radius | R=8D, 3D, 10D, 1D, 2D, 5D, 6D or Custom MSS Sp-43 |
Elbows | Angle : 3D, 4D, 5D, 6D, 1.0D, 1.5D, 2.0D, 2.5D, 7D-40D . Standard: MSS SP-75 JISB2312 JISB2313, ASME B16.9, 22.5 deg, 30deg, 45 deg, 90 deg, DIN2605 JISB2311 BS, 180 deg, GB, ISO |
Dimensions | ASME/ANSI B16.9, BS4504, ASME B16.28, MSS-SP-43, BS4504, BS1560, BS10 |
Manufacturing process | Press, Forge, Push, Cast, etc. |
Origin & Mills | Japanese, Korean, European, Indian, USA, Ukraine, Russian |
Type | DN15-DN1200 |
Connection | Welding |
Test Certificates | Raw Materials Certificate EN 10204/3.1B Third Party Inspection Report, etc |
IBR Approved Buttweld Elbow
IBR Weld Fittings
IBR Buttweld Pipe Fittings
IBR Reducing Tee
IBR Approved Eccentric Reducer
IBR Reducing Elbow
IBR Approved End Pipe Cap
IBR Approved Stub End
NPS (in.) |
Outside Diameter (in.) |
Pipe Schedule | Wall Thickness (inch) |
Temperature (oF) | |||||
---|---|---|---|---|---|---|---|---|---|
100 | 200 | 300 | 400 | 500 | 600 | ||||
(Pressure Rating) | |||||||||
16700 | 16700 | 16700 | 15500 | 14400 | 13500 | ||||
1″ | 1.315 | 40 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | 1783 |
1.315 | 160 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | 3632 | |
1 1/2″ | 1.900 | 40 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | 1317 |
1.900 | 160 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | 2717 | |
1.900 | 80 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | 1862 | |
2″ | 2.375 | 40 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | 1108 |
2.375 | 160 | 0.344 | 3283 | 3283 | 3283 | 3047 | 2831 | 2654 | |
2.375 | 80 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | 1605 | |
3″ | 3.500 | 40 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | 1052 |
3.500 | 160 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | 2253 | |
3.500 | 80 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | 1491 | |
4″ | 4.500 | 40 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | 891 |
4.500 | 160 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | 2111 | |
4.500 | 80 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | 1291 | |
5″ | 5.563 | 40 | 0.258 | 965 | 965 | 965 | 896 | 832 | 780 |
5.563 | 160 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | 2000 | |
5.563 | 80 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | 1154 | |
6″ | 6.625 | 40 | 0.280 | 877 | 877 | 877 | 814 | 756 | 709 |
6.625 | 160 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | 1925 | |
6.625 | 80 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | 1115 | |
8″ | 8.625 | 40 | 0.322 | 771 | 771 | 771 | 716 | 665 | 623 |
8.625 | 160 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | 1858 | |
8.625 | 80 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | 985 | |
10″ | 10.750 | 40 | 0.365 | 699 | 699 | 699 | 649 | 603 | 565 |
10.750 | 160 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | 1850 | |
10.750 | 80 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | 937 |
NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | REDUCERS | CAPS |
---|---|---|---|---|---|---|---|---|
NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Centre -to- End Dimension A, B, C, M | Centre-to- Centre O | Back-to- Face K | Alignment of Ends U | Overall Length H | Overall Length E |
½ to 2½ | 0.06 -0.03 |
0.03 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
4 | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
5 to 8 | 0.09 -0.06 |
0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
10 to 18 | 0.16 -0.12 |
0.12 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
20 to 24 | 0.25 -0.19 |
0.19 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
26 to 30 | 0.25 -0.19 |
0.19 | 0.12 | … | … | … | 0.19 | 0.38 |
32 to 48 | 0.25 -0.19 |
0.19 | 0.19 | … | … | … | 0.19 | 0.38 |
Product range and theoretical weights (kg) |
|||||||||
DN |
Schedule 10S |
Schedule 40S |
Schedule 80S |
||||||
900 Elbow |
450 Elbow |
Equal tee |
900 Elbow |
450 Elbow |
Equal tee |
900 Elbow |
450 Elbow |
Equal tee |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
Forms of Fttings | Fitting Size Range | Sch. of Buttweld fitting | Dimension Standards | |
---|---|---|---|---|
Welded Fitting | SMLS Pipe Fitting | |||
IBR Approved Tees | Upto 42″ NB | 1/8” NB to 24″ NB | SCH 10S, SCH 20, SCH 30, SCH 5, SCH 5S, SCH 10, SCH 60, SCH 80s, SCH 100, SCH 120, SCH XS, SCH XXS, SCH 40S, SCH 40, SCH STD, SCH 160, upto 50mm in case of Welded Fitting | ASME B16.28, ANSI B16.28, ANSI B16.25, ASME B16.9, ANSI B16.9, MS SP 75 |
IBR Return Bends | 1/8” NB to 8″ NB | |||
IBR Approved Reducers | Upto 42″ NB | 1/8” NB to 24″ NB | ||
IBR End Caps | Upto 42″ NB | 1/8” NB to 24″ NB | ||
IBR Approved Cross | 1/8” NB to 8″ NB | |||
IBR Approved Swage Nipple | 2 1/16” to 30” | |||
IBR Elbows — 45, 90 & 180 Degree | Upto 42″ NB | 1/8” NB to 24″ NB |