Inconel Pipe Bends

Inconel Pipe Bends

Inconel 600 10D Pipe Bend, 601 Inconel Mitered Pipe Bend manufacturer in India

Supplier of UNS N06600 5D Pipe Bend, ASME S366M Inconel 625 Customized Pipe Bend

Inconel Pipe Bend manufacuter in IndiaInconel Pipe Bend

Inconel U Pipe Bend Manufactuer of IndiaInconel U Pipe Bend

Inconel Piggable Pipe Bend Manufactuer of IndiaInconel Piggable Pipe Bend

Standard Specification for Inconel pipe bends:

Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75

Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Outer Diameter : 38.0 mm – 206.0 mm

Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request

Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm

Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°

Grades : Inconel 600, 601, 625, 718, 783, 690, x750 Pipe Bends

Inconel Pipe Bends Standards / Types And Pressure Class :

ASME Pipe Bend ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN Pipe Bend DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN Pipe Bend EN10253-1, EN10253-2
ASTM B366 ASME SB366 – Standard Specification for Steel Piping Fittings
ASME B16.9 Factory-Made Wrought Fittings Buttwelding
ASME B16.25 Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Inconel Buttweld Bend Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb
Inconel 718 2.4668 N07718

Chemical Composition of Grade Inconel Pipe Bends

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
Inconel 601 0.10 max 1.0 max 0.5 max 0.015 max 1.0 max Balance 58.0 – 63.0 21.0 – 25.0
Inconel 625 0.10 max 0.50 max 0.50 max 0.015 max 5.0 max 58.0 min 20.0 – 23.0
Inconel 718 0.08 max 0.35 max 0.35 max 0.015 max 0.30 max 50.00 – 55.00 17.00 – 21.00

Mechanical Properties of ASTM B366 Inconel Pipe Bend

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Exporter of ASTM B366 Seamless Pipe Bend, WNR 2.4816 Inconel High Pressure Bending

Stockholder of ASTM B366 625 Inconel J Pipe Bend, ANSI B16.9 Inconel 601 3D Pipe Bends in Mumbai
Check standard and pricelist of Alloy 625 Hot Induction Bend

Comments are closed.