Dinesh Industries > Inconel 600 Flanges

Inconel 600 Flanges

INCONEL Alloy 600  or  UNS N06600 is a standard engineering grade material. This alloy is intended to be used for applications which require resistance to not only corrosion but also heat. The Inconel 600 Flanges also has excellent mechanical properties while presenting a desirable set of properties including high strength and good workability. The versatility of alloy 600 has led to this particular Inconel grade being used in a variety of applications involving temperatures that range between cryogenic to above  2000°F. The 600 Inconel Slip On Flange is designed to slip over the outer side of either a pipe, reducer, long-tangent elbow and swage. Although this type of flange has poor resistance to shock and vibration, it is easier to, however, align a slip on flange as compared to a weld neck flange. We are leading Manufacturer and Supplier of Nickel Alloy 600 Blind Flange in India.

Leading Manufacturer of ASTM B564 UNS N06600 Slip on Flange, Refer Dimensions of Nickel Alloy 600 Blind/ Rtj Flanges.

Inconel 600 Flanges

Inconel 600 Flanges

ASTM B564 UNS N06600 Slip on Flange

ASTM B564 UNS N06600 Slip on Flange

Nickel Alloy 600 Blind Flange

Nickel Alloy 600 Blind Flange

Inconel 600 Weld Neck Flange

Inconel 600 Weld Neck Flange

DIN 2.4816 Forged Flanges

DIN 2.4816 Forged Flanges

Alloy 600 Threaded Flanges

Alloy 600 Threaded Flanges

Due to the slip on type flange being a 2 part attachment, it is relatively cheaper than a weld neck flange. Designed to be used for applications where high pressure is a factor, the UNS N06600 Weld Neck Flange aids in the reduction of stress from the base of the hub, while also transferring stress from the flange to the pipe instead. Similar to weld neck flanges, a blind flange could be used for high pressure applications as well. Typically the ASTM B564 Nickel 600 BLFR Flange is provided with a flat face, raised face or RTJ facing. Whereas Alloy 600 Threaded Flange produced under specification ASTM B564 are intended for low pressure applications while providing for a speedy join especially in those areas that are considered highly flammable and forging joints via welding may prove hazardous. We are supplier of Alloy 600 Threaded Flanges.

Inconel 600 Flanges
Inconel 600 Flanges Manufacturer

Material Specification of Inconel 600 Flanges

Size Chart 1/2″ to 48″
(15 NB) to (1200NB)
Pressure Rating Chart ANSI 300 LBS, 600 LBS, 150 LBS, 2500 LBS, 900 LBS, 1500 LBS
Coating Zinc Plated, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized
Common Types Threaded / Screwed / Forged / Plate
DIN / JIS / UNI / EN 16Bar, 6Bar, 25Bar, 40Bar, 10Bar / PN10, PN25, PN64, PN16, PN6, PN40
Connect Type/ Flange Face Type RF, Small Tongue, RTJ, FF, LJF, Large Tongue & Groove
Dealer & Distributor in Khobar, Coimbatore, Melbourne, Noida, Gujarat, Mexico, Gurgaon, Ludhiana, London, Muscat, Pimpri-Chinchwad, Mumbai, Ranchi, Bogota, Courbevoie, Caracas, Dammam, Hyderabad, Bengaluru, Kanpur, Karachi, Ahmedabad, Jamshedpur, New Delhi, Ernakulam, Santiago, Chennai, Thiruvananthapuram, Sydney, Bangalore, Ankara, Janeiro, Manama, Tehran, Calgary, Tau, Kuwait, Vadodara, Ludhiana, Abu Dhabi, Perth, Lagos, Montreal, Howrah, Riyadh, Indore, Port-of-Spain, Surat, Ahvaz, Gimhae-si, Istanbul, Kolkata, Nagpur, Rajkot, Baroda
Manufacturer of

ANSI DIN, GOST, UNI, BS, AS2129, JIS, NFE, AWWA, SABS, EN etc.

Equipment Press machine, Bending machine, Sand-blasting machine, Pushing Machine, electric bevelling machine etc
Origin West Europe / Japan / Indian / USA / Korean
Test X-ray detector, Direct-reading Spectrograph, Magnetic particle detector, UI trasonic flaw detector, ydrostatic testing machine
Standards ANSI/ASME B16.5, B16.47 Series A & B, API7S-15, API7S-43, API605, B16.48, BS4504, MSS S44, ISO70051, BS 10, EN-1092, DIN, ASME/ANSI B16.5/16.36/16.47A/16.47B, JISB2220, BS1560-3.1, EN1092

Buy Inconel 600 Weld Neck Flange Best Price & Fast Delivery, Manufacturer Of DIN 2.4816 Forged Flanges In India

Size Range of 600 Inconel Pipe Flange

  • Inconel Alloy Din 2.4816 Flange : 1/2″ (15 NB) to 48″ (1200NB)
  • Inconel 600 Slip on Flange : 1/2″ NB – 12″ NB
  • ASTM B564 Inconel 600 Blind Flange : 1/2″ NB – 24″ NB

Design And Style Of ASTM B564 UNS N06600 Flanges

Inconel 600 Reducing Flange

Inconel 600 Reducing Flange

Nickel 600 Blanks

Nickel 600 Blanks

Inconel Alloy 600 Spacer

Inconel Alloy 600 Spacer

2.4816 Inconel 600 Long weld neck flange

2.4816 Inconel 600 Long weld neck flange

Alloy 600 Orifice Flange and Plate

Alloy 600 Orifice Flange and Plate

Nickel 600 Flangeolet / Weldoflange / Nippoflange

Nickel 600 Flangeolet / Weldoflange / Nippoflange

Inconel 2.4816 Threaded Flange

Inconel 2.4816 Threaded Flange

2.4816 Alloy 600 Weld Neck Flanges

2.4816 Alloy 600 Weld Neck Flanges

Alloy Grade 2.4816 Socket Weld Flange

Alloy Grade 2.4816 Socket Weld Flange

Din 2.4816 Slip-On Flange

Din 2.4816 Slip-On Flange

2.4816 Inconel 600 Spectacle Blind

2.4816 Inconel 600 Spectacle Blind

Nickel Alloy Uns N06600 Expander Flange

Nickel Alloy Uns N06600 Expander Flange

2.4816 Alloy 600 Blind Flange

2.4816 Alloy 600 Blind Flange

Inconel 2.4816 Lap Joint Flange

Inconel 2.4816 Lap Joint Flange

Nickel Alloy 600 Flange Face Connection Types

ASTM B564 Inconel 600 tongue and groove Flange

ASTM B564 Inconel 600 tongue and groove Flange

Din 2.4816 Raise Face (RF) Flange

Din 2.4816 Raise Face (RF) Flange

ASME SB564 UNS N06600 RTJ Flanges

ASME SB564 UNS N06600 RTJ Flanges

Nickel 600 SORF Flanges

Nickel 600 SORF Flanges

2.4816 Inconel 600 SWRF Flanges

2.4816 Inconel 600 SWRF Flanges

W.nr. 2.4816 BLRF Flanges

W.nr. 2.4816 BLRF Flanges

2.4816 Inconel male- female Flange

2.4816 Inconel male- female Flange

Alloy Uns N06600 Flat Face (FF) Flanges

Alloy Uns N06600 Flat Face (FF) Flanges

ASTM B564 UNS N06600 WNRF Flanges

ASTM B564 UNS N06600 WNRF Flanges

ASTM B564 Inconel 600 Ring Joint (RJT) Flanges

ASTM B564 Inconel 600 Ring Joint (RJT) Flanges

Nickel Alloy Uns N06600 LWNRF Flanges

Nickel Alloy Uns N06600 LWNRF Flanges

Various Inconel 600 Flanges Pressure Rating Types

Class 600 Inconel 600 Flange

Class 600 Inconel 600 Flange

Class 150 Inconel Alloy 600 Forged Flanges

Class 150 Inconel Alloy 600 Forged Flanges

Class 900 Inconel 600 Uns N06600 Flanges

Class 900 Inconel 600 Uns N06600 Flanges

Class 1500 ASTM B564 UNS N06600 Pipe Flange

Class 1500 ASTM B564 UNS N06600 Pipe Flange

Class 400 Alloy 600 Plate Flange

Class 400 Alloy 600 Plate Flange

Class 2500 Alloy Grade 2.4816 Flanges

Class 2500 Alloy Grade 2.4816 Flanges

Class 300 Alloy 600 Pipe Flanges

Class 300 Alloy 600 Pipe Flanges

Different 600 Inconel Flanges Standard

MSS SP-44 Inconel 600 Uns N06600 Pipe Flange

MSS SP-44 Inconel 600 Uns N06600 Pipe Flange

ASME B16.36 Inconel 600 Pipe Flange

ASME B16.36 Inconel 600 Pipe Flange

ASME B16.47 Series B 2.4816 Inconel Pipe Flanges

ASME B16.47 Series B 2.4816 Inconel Pipe Flanges

API 590 Alloy 600 Uns N06600 Pipe Flanges

API 590 Alloy 600 Uns N06600 Pipe Flanges

API 605 ASME SB564 UNS N06600 Flange

API 605 ASME SB564 UNS N06600 Flange

ASME B16.45 Alloy 600 Uns N06600 Flanges

ASME B16.45 Alloy 600 Uns N06600 Flanges

ASME B16.47 Series A Alloy Uns N06600 Flanges

ASME B16.47 Series A Alloy Uns N06600 Flanges

ASME B16.5 W.nr. 2.4816 Flange

ASME B16.5 W.nr. 2.4816 Flange

View Specification Of ASME B16.5 600 Inconel Orifice Flange, Get at discount on Alloy 600 Threaded Flanges

Price List of ASTM B564 Inconel 600 Slip On Flange

ASTM B564 UNS N06600 Pipe Flange Price Per Piece in India Inconel 600 Flange Price in INR Alloy 600 Flange Price in USD Din 2.4816 Flange Price in UAE Dirham
2 150# RF ASME B16.5 BLIND FLANGE 50-150RF-INCONEL 600 Per Kg 18,583 US $253.82 UAE Dirham 932.35
UNS N06600 INCONEL FORGED FLANGE 2300# SM.GRV.WN SCH80 SB564 ASME B16.5 DN50 Per Unit 33,199 $453.44 UAE Dirham 1665.66
Contact US For Inconel 600 UNS N06600 Spectacle Blind Flange Instant Delivery. Check Class 150 ASTM B564 Nickel 600 Socket Weld Flanges Pressure Ratings

Composition Standard of Inconel Alloy Din 2.4816 Flange

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Mechanical Analysis of Alloy 600 Flanges

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Inconel UNS N06600 Pipe Flange Equivalent Material

STANDARD UNS BS GOST AFNOR JIS EN WERKSTOFF NR.
Inconel 600 N06600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NCF 600 NiCr15Fe 2.4816

Manufacturer of Following Inconel 600 Flanges

DIN 17754 WERKSTOFF Nr 2.4816  Lap Joint Flange

DIN 17754 WERKSTOFF Nr 2.4816 Lap Joint Flange

Alloy 600 3 1/2'' Class 600 PN 110 ASTM B16.5 WNRF welding neck Flange

Alloy 600 3 1/2” Class 600 PN 110 ASTM B16.5 WNRF welding neck Flange

inconel 600 flange

inconel 600 flange

Inconel 600  Welding Neck Flange(WNF)

Inconel 600 Welding Neck Flange(WNF)

600 Alloy Weld Neck Raised Face Flanges

600 Alloy Weld Neck Raised Face Flanges

Inconel 600 Slip-on Flange(SOF)

Inconel 600 Slip-on Flange(SOF)

Inconel 600 UNS N06600 Flange WN RF 1/2

Inconel 600 UNS N06600 Flange WN RF 1/2″ ANSI 1500/900#

Nickel 600 Reducing Flanges

Nickel 600 Reducing Flanges

3inch 1500# RF Inconel 600 Weld neck flange ASME B16.5

3inch 1500# RF Inconel 600 Weld neck flange ASME B16.5

UNS N06600 Orifice Flange

UNS N06600 Orifice Flange

DIN 2.4816 Slip-on Raised Face Flanges

DIN 2.4816 Slip-on Raised Face Flanges

600 Inconel Blind Raised Face Flanges

600 Inconel Blind Raised Face Flanges

inconel 600 Lap Joint Flange(LJW)

inconel 600 Lap Joint Flange(LJW)

AFNOR-NC 15 Fe Ring Joint Flange

AFNOR-NC 15 Fe Ring Joint Flange

ASME B16.5 3 inch Class 300 PN 50 UNS N06600 WNRF ansi flange

ASME B16.5 3 inch Class 300 PN 50 UNS N06600 WNRF ansi flange

16

16″ steel weld neck flange schedule 80 class 600 Inconel 600 square flange

TÜV 305  Spectacle Blind Flange

TÜV 305 Spectacle Blind Flange

Alloy 600 Socket Welding Flange (SWF)

Alloy 600 Socket Welding Flange (SWF)

Inconel 600 Nickel alloy Lap joint flange 1/2

Inconel 600 Nickel alloy Lap joint flange 1/2″ 300# DN15 LJ flange for oil water gas LJW ANSI B16.5

inconel 600 weld neck flange

inconel 600 weld neck flange

DIN 17750 Threaded Flange

DIN 17750 Threaded Flange

ASTM B564 alloy 600 Socket Weld Flange

ASTM B564 alloy 600 Socket Weld Flange

Inconel Alloy 600 Long Weld Neck Flange

Inconel Alloy 600 Long Weld Neck Flange

Blind Nickel Alloy steel Inconel 600 Flange 3

Blind Nickel Alloy steel Inconel 600 Flange 3″ 300LB BL ANSI B16.5 Forged

BS 3072-3076 (NA14) DIN 17742 Blind Flange

BS 3072-3076 (NA14) DIN 17742 Blind Flange

alloy 600 flanges

alloy 600 flanges

inconel 600 blind flange

inconel 600 blind flange

ASME SB-564 inconel 600  Slip On Flange

ASME SB-564 inconel 600 Slip On Flange

Check Stock of ASTM B564 UNS N06600 Flanges

Inconel UNS N06600 Weld Neck Flanges Inconel 600 Lap Joint Flanges
Alloy 600 Long Weld Neck Flanges ASTM B564 UNS N06600 Spectacle Blind Flanges
Inconel Alloy Din 2.4816 Spades & Ring Spacers 600 Inconel Nipoflange
ASTM B564 Inconel 600 5D Weldoflange Inconel UNS N06600 Flange Outlet
600 Inconel Alloy Flanges 600 Inconel Blind Flanges
600 Inconel Alloy Forged Flanges Alloy 600 Plate Flanges
600 Inconel Alloy Flanges Alloy 600 BS 10 Flanges
Inconel Alloy Din 2.4816 BS 4504 Flanges ASTM B564 Inconel 600 EN 1092-1 Flanges
Inconel UNS N06600 SORF Flanges ASTM B564 UNS N06600 BLRF Flanges
600 Inconel WNRF Flanges 600 Inconel Alloy Series a Lap Joint Ring Flanges
ASTM B564 UNS N06600 Slip on Flanges ASTM B564 Inconel 600 Threaded Flanges
Inconel Alloy Din 2.4816 Reducing Flanges Alloy 600 Socket Weld Flanges
Alloy 600 PN16 blind Flanges Inconel Alloy Din 2.4816 Forged Socket Weld Flanges
ASTM B564 UNS N06600 Class 300 slip on Flanges Inconel UNS N06600 Slip On Flanges
Inconel 600 Tongue and Groove Flanges ASTM B564 UNS N06600 Male and Female Flange
Inconel UNS N06600 Reducing Flanges 600 Inconel ASME B16.5 Flanges
600 Inconel Alloy SWRF Flange Inconel 600 Forged blind Flanges
ASTM B564 UNS N06600 weld neck flange Alloy 600 Socket Weld Flanges
ASTM B564 Inconel 600 Forged slip on flanges 600 Inconel Race face slip on flange
ASTM B564 Inconel 600 Ring Type Joint Flanges Inconel Alloy Din 2.4816 Raised Face Flanges
Inconel Alloy Din 2.4816 lap joint flange 600 Inconel Slip On Integral flange
Inconel 600 Forged puddle flange ASTM B564 Inconel 600 table e long weld neck
ASTM B564 UNS N06600 Class 150 LBS Flange Inconel 600 PN10 Forged Flanges
Refar Inconel Alloy 600 Reducing Flanges Dimensions And Weight Chart, Manufacturer of WNR 2.4816 Lap Joint Flanges

Dimension Table of Inconel 600 Flanges

Nominal Pipe Size
NPS

(inches)

Inconel 600 Class 300
Diameter of
Flange

(inches)

No.
of

Bolts

Diameter of
Bolts

(inches)

Diameter of
Bolt Holes
(inches)
Bolt
Circle

(inches)

1/4 3-3/8 4 1/2 0.62 2-1/4
1/2 3-3/4 4 1/2 0.62 2-5/8
3/4 4-5/8 4 5/8 0.75 3-1/4
1 4-7/8 4 5/8 0.75 3-1/2
1-1/4 5-1/4 4 5/8 0.75 3-7/8
1-1/2 6-1/8 4 3/4 0.88 4-1/2
2 6-1/2 8 5/8 0.75 5
2-1/2 7-1/2 8 3/4 0.88 5-7/8
3 8-1/4 8 3/4 0.88 6-5/8
3-1/2 9 8 3/4 0.88 7-1/4
4 10 8 3/4 0.88 7-7/8
5 11 8 3/4 0.88 9-1/4
6 12-1/2 12 3/4 0.88 10-5/8
8 15 12 7/8 1 13
10 17-1/2 16 1 1.12 15-1/4
12 20-1/2 16 1-1/8 1.25 17-3/4
14 23 20 1-1/8 1.25 20-1/4
16 25-1/2 20 1-1/4 1.38 22-1/2
18 28 24 1-1/4 1.38 24-3/4
20 30-1/2 24 1-1/4 1.38 27
24 36 24 1-1/2 1.62 32

Pressure Class of ASTM B564 Nickel 600 Flange

Temp. Working Pressures by Classes
Class 600 Class 900
-29 to 38 103.4 155.1
50 103.4 155.1
100 103.0 154.6
150 100.3 150.6
200 96.7 145.0
250 92.7 139.0
300 85.7 128.6
325 82.6 124.0
350 80.4 120.7
375 77.6 116.5
400 73.3 109.8
425 70.0 105.1
450 67.7 101.4
475 63.4 95.1
500 56.5 84.7
538 50.0 75.2
550 49.8 74.8
575 47.9 71.8
600 42.9 64.2
625 36.6 54.9
650 28.1 42.2
675 23.0 34.6
700 17.5 26.3

Weight Chart of Alloy 600 Flange

Standard Class Dia Bolt Circle Dia No. of Bolts Bolt Sizes Dia of Bolt Hole
AS4087 Flange PN14 95 67 4 M12 14
AS 2129 Flange Table C 95 67 4 13 14
Table H  114 83 4 16 17
Table J 114 83 4 16 17
Table E  95 67 4 13 14
Table F  95 67 4 13 14
Table D  95 67 4 13 14
ANSI B16.5 Flanges ANSI 300 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 600 95 67 4 13 16
ANSI 150 89 60 4 13 16
ANSI 1500  121 83 4 19 22
ISO 7005 (DIN) Flange PN6  80 55 4 M10 11
PN16  95 65 4 M12 14
PN40 95 65 4 M12 14
PN20  90 60.5 4 M14 16
PN10  95 65 4 M12 14
PN25  95 65 4 M12 14

View what exactly we supply and where

1/2″ Class 300 Inconel 600 Flange For Gas Water And Oil Singapore, Norway, Los Alamos -Mexico, Finland
3inch 1500# RF Inconel 600 Weld neck flange ASME B16.5 Malaysia, Philippines, Europe, France
Class 1500, SCH30, Inconel 600 Pipe Flanges Europe, Egypt, Sweden, Oman
300 LB, FF, ASME B16.5, 8 Inch, 600 Inconel® RTJ Flanges UK, United Arab Emirates (UAE), Philippines, Bahrain
Inconel 600 80 Inch Flange Singapore, Hong Kong, Dammam -KSA, UAE
Forged ASME B16.5 UNS N06600 Lap Joint Flange Thailand, UK, Malaysia, Indonesia
Inconel N06600 Socket Weld Flanges, ASME B16.5, FF Mexico, Malaysia, Taiwan, Thailand
1/2″ Class 600 Alloy 600 Orifice Flange Malaysia, UK, South Korea, Bangladesh
Nickel alloy 625 Lap joint flange 1/2″ 300# DN15 Malaysia, Dubai, Qatar, Nigeria
B16.47 Series A Inconel 600 1/2″ – 96″ Blind Flange Malaysia, Turkey, Colombia, South Africa
Werkstoff Nr. 2.4816 Socket Weld Flanges Spain, Australia, Malaysia, Germany
uns N06600 pn6 threaded flange Philippines, Netherlands, Malaysia, Philippines
2″ DN15 Inconel 600 Class150 ASME B16.5 RF Weld neck flange Belgium, Malaysia, Czechia, UAE
ASTM B564 UNS N06600 nickel alloy steel WN flange United Kingdom -UK, Chile, China, South Africa
1inch DN25 600# welding neck nickel alloy 625 flange RF Forged ANSI B16.5 Canada, Italy, Japan, Saudi Arabia (KSA)
B564 N06600 Alloy 600 Weld Neck Flange Ellington -United States, Russia, NY 12203 (USA), Brazil
ASTM B166 Inconel 600 Weld Neck Flanges Poland, Singapore, Romania, Kuwait
CL150, SCH 160, Inconel 600 Weld Neck Flanges Canada, Iran, Malaysia, Singapore
ASME B16.5, FF, 22 Inch, Class 1500, 625 Alloy Reducing Flanges Europe, Malaysia, Singapore, USA