Dinesh Industries > Inconel 601 Pipe Fittings

Inconel 601 Pipe Fittings

As a part of ASTM B366 specification, Inconel 601 fittings are often put through chemical and product analysis, which determines several aspects of these fittings. Generally, the specification is a guideline which the manufacturer follows; such that the fittings, when tested for heat treatment, chemical composition tension test, tensile properties and dimensions, the Inconel 601 Pipe Fittings, are able to conform to the requirements.

The most important characteristic of Inconel 601 is that the fittings have superior resistance to oxidation even when exposed to very high temperatures, i.e. exceeding up to 1250C. This property is noticed by many manufacturers and suppliers even when the alloy has been put under severe settings such as cyclical heating and cooling. This is possible only because Inconel 601 forms a tightly adherent oxide layer on the surface of the finish. This self-adherent layer proves to be beneficial for the fasteners quest to resist against spalling. Furthermore, the ASTM B366 UNS N06601 Fittings is resistant to carburization while also offering good resistance to carbon nitriding conditions.

ASTM B366 Inconel 601 Pipe Fittings manufacturers, View Inconel 601 Buttweld Fittings Weight Chart

Inconel 601 pipe fittings

Inconel 601 pipe fittings

Alloy 601 elbow

Alloy 601 elbow

ASTM B366 UNS N06601 Tee

ASTM B366 UNS N06601 Tee

The content of both high chromium and substantial aluminium is what gives these fittings good resistance to oxidizing sulfur bearing atmospheres, especially in those instances where an elevated temperature exists.  Elbows are a category of fittings that can be used to change the direction of flow between two pipes. Typically most elbows are produced with an angle of 22.5o, 45o and 90o. If pipes are of the same diameter then a regular Inconel 601 Elbow could be used. However, if there is a change in the size of the pipe a reducer elbow is used. An Inconel 601 Reducer permits for a change in the size of the pipe in order to meet the hydraulic flow requirements of the piping system or if the fitting is required to adapt to an existing piping system that is of a different size. One of the most commonly used pipe fittings, the Alloy 601 Tee could be used to either combine or divide fluid flow. Tees are fittings that could be used to connect pipes of different diameters as well as to change the direction of a pipe run, or to do both simultaneously.

Specification List of Inconel 601 Fitting

Dimensions ASME B16.28, MSS-SP-43, ASME/ANSI B16.9, BS4504, BS10, BS4504, BS1560,
Thickness SCH10, SCH 80, SCH 100, SCH20, SCH30, STD SCH40, SCH 160, XXS, SCH60, XS, SCH 120, SCH 140, available with NACE MR 01-75
Type DN15-DN1200
Connection Welding
Bending Radius R=2D, 3D, 5D, 6D, 8D, 1D, 10D or Custom
Manufacturing process Press, Forge, Push, Cast, etc.
Specialized manufacturer of Tees, Crosses, Reducers, 90º Elbows, Stub End, Pipe Bend, 45º Elbows, Pipe Cap

Stockholder of Inconel 601 Elbow in India, Inconel 601 Tee suppliers, stockist Alloy 601 Fittings, check Inconel 601 Reducer Price in India

ASTM B366 Inconel 601 Pipe Fitting Sizes

  • Alloy 601 Seamless ButtWeld Fittings : 1/2 – 10 inch
  • 601 Inconel Welded Pipe Fittings : 1/2″ – 48″
  • 601 Inconel Alloy Fittings : ½” NB to 24″ NB

Inconel 601 Fittings at Factory price in India. Ask for free sample of B366 Inconel Alloy 601 elbow & Inconel UNS N06601 end cap or Inconel Alloy 601 reducer elbow, Get Free quote for ASTM B366 601 Inconel Alloy reducer, ASTM B366 Inconel 601 tee or ASTM

Available Stock of ASTM B366 UNS N06601 Buttweld Fitting

ASTM B366 Inconel 601 Fittings Inconel 601 Pipe Fitting
ASTM B366 UNS N06601 90 Degree Elbow 601 Inconel Alloy End Cap
Alloy 601 45 Degree Elbow Inconel Alloy Din 2.4851 Buttweld Fitting
ASTM B366 UNS N06601 3D Elbow Inconel UNS N06601 End Cap
Inconel Alloy Din 2.4851 5D Elbow Inconel 601 Reducer
Alloy 601 Equal Cross Inconel 601 Pipe Cap
ASTM B366 Inconel 601 Lateral Tee 601 Inconel Alloy Cross Tee
Inconel UNS N06601 1D Elbow 601 Inconel Short Stub End
Inconel Alloy Din 2.4851 Stub End ASTM B366 Inconel 601 Pipe Cap
ASTM B366 Inconel 601 Buttweld Fittings 601 Inconel Alloy Pipe Bend
Alloy 601 Pipe Fittings Inconel UNS N06601 Long Stub End
Inconel Alloy Din 2.4851 Eccentric Reducer 601 Inconel Alloy Long Radius Elbow
Inconel 601 Equal Tee Inconel UNS N06601 Stub End
ASTM B366 UNS N06601 Concentric Reducer Alloy 601 5D Elbow
601 Inconel Concentric Reducer ASTM B366 UNS N06601 Short Radius Elbow
601 Inconel Reducing Cross Inconel Alloy Din 2.4851 Equal Cross

Check Price of 601 Inconel Alloy Fittings

Inconel 601 UNS N0660 Pipe Fittings Price Per Piece in India ASTM B366 601 Inconel Alloy Fittings Price in INR ASTM B366 601 Inconel Alloy Weld Fittings Price in USD ASTM B366 601 Inconel Alloy Fittings Price in UAE Dirham
Inconel 601 UNS N06601 1/2″ Tee Price in India 97761.88 $1407.2 UAE Dirham 5167.98
Alloy 601 UNS N06601 90 Deg LR Seamless Elbow Price in India 90049.32 $1296.2 UAE Dirham 4760.27
ANSI B16.9 Inconel 601 1-1/2″ 45 Deg Elbow Price in India 19871.99 $286 UAE Dirham 1050.49
ASME SB366 Inconel 601 1-1/4″ 45 Deg Elbow Price List 17009.32 $244.8 UAE Dirham 899.16
ASTM B366 601 Inconel Alloy 1/2″ Schedule 10 Stub End Price List 12756.99 $183.6 UAE Dirham 674.37
Inconel 601 UNS N06601 Stub End Cost in Mumbai 15077.70 $217 UAE Dirham 797.05
Price of Inconel WERKSTOFF NR.2.4851 2-1/2″ Schedule 10 Stub End in India 37506.65 $539.8 UAE Dirham 1982.71
Price of 601 Inconel Alloy 1/8″ Tee in Mumbai 13347.59 $192.1 UAE Dirham 705.59
Cost ofASME Inconel 601 Class 3000 1/8″ Elbow in India 49381.21 $710.7 UAE Dirham 2610.44
ANSI B16.9 Inconel 601 1″ Schedule 40 Stub End Price in India 17690.24 $254.6 UAE Dirham 935.16
Supplier of Inconel 601 Elbow, distributor of Inconel UNS N06601 Tee, ASTM B366 601 Inconel Alloy end cap & ASTM B366 Inconel 601 reducer in Mumbai, India

Chemical Structure of Alloy 601 Pipe Fittings

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.0 max 0.5 max 0.015 max 1.0 max Balance 58.0 – 63.0 21.0 – 25.0

Mechanical Behaviour of Inconel Alloy Din 2.4851 Buttweld Fitting

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent of Inconel UNS N06601 Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
Dealer of B366 Inconel 601 in India, Purchase ASTM B366 Alloy 601 Fittings at factory price, contact 601 Inconel Alloy Weld Fittings manufacturers

Dimensions of 601 Inconel Pipe Fittings

Nominal
Pipe

Size

Outside
Diameter
90° Elbows 45° Elbows 180° Returns
(inches)
Long Radius
Short Radius
Long Radius
Long Radius
(mm)
(inches)
Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2
21.3
0.840
1 1/2
5/8
2
1 7/8
3/4
26.7
1.050
1 1/8
7/16
2 1/4
1 11/16
1
33.4
1.315
1 1/2
1
7/8
3
2 3/16
1 1/4
42.2
1.660
1 7/8
1 1/4
1
3 3/4
2 3/4
1 1/2
48.3
1.900
2 1/4
1 1/2
1 1/8
3
4 1/2
3 1/4
2
60.3
2.375
3
2
1 3/8
4
6
4 3/16
2 1/2
73.0
2.875
3 3/4
2 1/2
1 3/4
5
7 1/2
5 3/16
3
88.9
3.500
4 1/2
3
2
6
9
6 1/4
3 1/2
101.6
4.000
5 1/4
3 1/2
2 1/4
7
10 1/2
7 1/4
4
114.3
4.500
6
4
2 1/2
8
12
8 1/4
5
141.3
5.563
7 1/2
5
3 1/8
10
15
10 5/16
6
168.3
6.625
9
6
3 3/4
12
18
12 5/16
8
219.1
8.625
12
8
5
12
24
16 5/16
10
273.1
10.750
15
10
6 1/4
15
30
20 3/8
12
323.9
12.750
18
12
7 1/2
18
36
24 3/8