Inconel 625 Flanges
Generally, well suited to be used for low pressure and temperature applications, the 625 Inconel Slip On Flange is attached to a piping system by welding both inside and outside. The alloy used to manufacture Inconel 625 flanges is a nickel-based superalloy. This superalloy not only possesses excellent resistance to oxidation but also superior resistance to corrosion in a wide range of environments. Additionally, since this alloy has outstanding tensile strength and toughness properties, the Inconel 625 Flanges could be used at temperatures ranging from cryogenic up to an elevated temperature of 2000°F. ASTM B564 Inconel 625 flanges possess a high degree of formability, while demonstrating better weldability in comparison to many other highly alloyed nickel based materials. We are leading Manufacturer and Supplier of Nickel 625 Blind Flange from last 25 years. However, in those areas where welding is considered to be a hazardous risk, an Alloy 625 Threaded Flange could be fitted to pipes of various sizes without welding.
Oldest ASTM B564 UNS N06625 Slip on Flanges Manufacturer in India, Refer Dimensions of Nickel 625 Blind/ Weld Neck Flange
Inconel 625 Flanges
ASTM B564 UNS N06625 Slip on Flanges
Nickel 625 Blind Flange
ANSI B16.5 Inconel 625 Weld Neck Flanges
Din 2.4856 Forged Flanges
625 Inconel Lap Joint Flanges
This is a primary reason for which threaded flanges are highly demanded across several industries. Threaded flanges are used in conjunction with pipes that have external threads, which means these flanges can be attached without welding. Are you looking for Manufacturer of 625 Inconel Lap Joint Flanges. On the other hand, a UNS N06625 Weld Neck Flange is often used for applications where high pressure is an important requirement. This is because these flanges not only transfer stress from the flange to the pipe but they also reduce the concentration of stress from the base of the hub. Blind flanges are commonly used for testing the flow of media i.e. gas or liquid through a pipe or vessel, in addition to being used to seal the end of either piping systems or pressure vessel openings. We are Din 2.4856 Forged Flanges Manufacturer. ASTM B564 Nickel 625 BLFR Flange permit for easy access to the pipe in a system in case work must be done inside the line.
Inconel 625 Flanges Manufacturer
- Spec Chart of Inconel 625 Flanges
- Sizes of ASTM B564 Inconel 625 Pipe Flange
- Available Nickel 625 Flanges Types
- Connect Type of Inconel 625 Flanges
- ASTM B564 UNS N06625 Flange Pressure Classes
- Manufacturing Standards Types of 625 Inconel Flange
- View Prices of 625 Inconel Alloy Slip On Flange
- Chemical Compatibility of Alloy 625 Flange
- Mechanical Properties Chart of Inconel Alloy Din 2.4856 Flanges
- Inconel UNS N06625 Pipe Flange Equivalent grades
- Most Selling Nickel 625 Flange
- Inconel 625 Flanges Stock List
- 625 Inconel Plate Flange Dimension Table
- Pressure Rating of Inconel 625 Flange
- Inconel 625 Flange Weight Chart
Alloy 625 Flange Manufacturer
Spec Chart of Inconel 625 Flanges
| Size Chart | 1/2″ to 48″ (15 NB) to (1200NB) |
|---|---|
| Pressure Rating Chart ANSI | 300 LBS, 600 LBS, 150 LBS, 2500 LBS, 900 LBS, 1500 LBS |
| Coating | Zinc Plated, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized |
| Common Types | Threaded / Screwed / Forged / Plate |
| Manufacturer of |
ANSI DIN, GOST, UNI, BS, AS2129, JIS, NFE, AWWA, SABS, EN etc. |
| DIN / JIS / UNI / EN | 16Bar, 6Bar, 25Bar, 40Bar, 10Bar / PN10, PN25, PN64, PN16, PN6, PN40 |
| Connect Type/ Flange Face Type | RF, Small Tongue, RTJ, FF, LJF, Large Tongue & Groove |
| Equipment | Press machine, Bending machine, Sand-blasting machine, Pushing Machine, electric bevelling machine etc |
| Test | X-ray detector, Direct-reading Spectrograph, Magnetic particle detector, UI trasonic flaw detector, ydrostatic testing machine |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, API7S-15, API7S-43, API605, B16.48, BS4504, MSS S44, ISO70051, BS 10, EN-1092, DIN, ASME/ANSI B16.5/16.36/16.47A/16.47B, JISB2220, BS1560-3.1, EN1092 |
| Origin | West Europe / Japan / Indian / USA / Korean |
Are you looking for ANSI B16.5 Inconel 625 Threaded Flange Manufacturer. View Pressure Rating of of Din 2.4856 Forged Flanges
Sizes of ASTM B564 Inconel 625 Pipe Flange
- Alloy 625 Flange : 1/2″ (15 NB) to 48″ (1200NB)
- 625 Inconel Slip on Flange : 1/2″ NB – 12″ NB
- 625 Inconel Alloy Blind Flange : 1/2″ NB – 24″ NB
Available Nickel 625 Flanges Types
ASTM B564 Inconel 625 Blind Flange
Inconel 625 Spectacle Blind
2.4856 Inconel 625 Lap Joint Flange
Nickel 625 Orifice Flange and Plate
Nickel Alloy Uns N06625 Spacer
Nickel 625 Long weld neck flange
2.4856 Inconel 625 Flangeolet / Weldoflange / Nippoflange
Alloy 625 Expander Flange
Inconel Alloy 625 Slip-On Flange
Inconel 625 Reducing Flange
Inconel Alloy 625 Weld Neck Flanges
Inconel 625 Threaded Flange
2.4856 Inconel Socket Weld Flange
ASME SB564 UNS N06625 Blanks
Connect Type of Inconel 625 Flanges
2.4856 Inconel tongue and groove Flange
2.4856 Alloy 625 RTJ Flanges
ASTM B564 UNS N06625 SORF Flanges
ASME SB564 UNS N06625 Raise Face (RF) Flange
Din 2.4856 LWNRF Flanges
Nickel Alloy Uns N06625 SWRF Flanges
2.4856 Alloy 625 WNRF Flanges
W.nr. 2.4856 Flat Face (FF) Flanges
Inconel 2.4856 Ring Joint (RJT) Flanges
Nickel 625 BLRF Flanges
Inconel Alloy 625 male- female Flange
ASTM B564 UNS N06625 Flange Pressure Classes
Class 400 Din 2.4856 Plate Flange
Class 150 Alloy Uns N06625 Forged Flanges
Class 300 Alloy Uns N06625 Pipe Flanges
Class 2500 W.nr. 2.4856 Flanges
Class 1500 Alloy Grade 2.4856 Pipe Flange
Class 600 Alloy 625 Uns N06625 Flange
Class 900 ASTM B564 Inconel 625 Flanges
Manufacturing Standards Types of 625 Inconel Flange
ASME B16.5 Alloy Grade 2.4856 Flange
API 590 Inconel 2.4856 Pipe Flanges
MSS SP-44 ASTM B564 UNS N06625 Pipe Flange
API 605 Inconel 625 Uns N06625 Flange
ASME B16.45 Alloy 625 Uns N06625 Flanges
ASME B16.47 Series A Alloy 625 Flanges
ASME B16.47 Series B 2.4856 Inconel 625 Pipe Flanges
ASME B16.36 Inconel 625 Uns N06625 Pipe Flange
Check 625 Inconel Lap Joint Flanges Weight Chart and Sizes, Alloy Din 2.4856 Socket Weld Flange Supplier In India
View Prices of 625 Inconel Alloy Slip On Flange
| ASTM B564 Inconel 625 Pipe Flange Price Per Piece in India | Alloy 625 Flange Price in INR | 625 Inconel Alloy Flange Price in USD | Nickel 625 Flange Price in UAE Dirham |
| INCONEL 625 FLANGE, SIZE: 6 X 300 LB RTJ Per Kg | 3,553 | US $48.44 | UAE Dirham 177.93 |
| INCONEL 625 FLANGES 113/16API 10000 # RTJ Per Unit | 44,659 | US $608.91 | UAE Dirham 2236.46 |
Refer Dimensions of NCF 625 Loose Flange, View Price List of Inconel 625 ASME SB564 Puddle Flange
Chemical Compatibility of Alloy 625 Flange
| Grade | Mn | Si | S | Ni | Cr | Cu | Fe | C |
|---|---|---|---|---|---|---|---|---|
| Inconel 625 | 0.50 max | 0.50 max | 0.015 max | 58.0 min | 20.0 – 23.0 | – | 5.0 max | 0.10 max |
Mechanical Properties Chart of Inconel Alloy Din 2.4856 Flanges
| Element | Yield Strength (0.2%Offset) | Density | Tensile Strength | Elongation | Melting Point |
| Inconel 625 | Psi – 75,000 , MPa – 517 | 8.4 g/cm3 | Psi – 1,35,000 , MPa – 930 | 42.5 % | 1350 °C (2460 °F) |
Inconel UNS N06625 Pipe Flange Equivalent grades
| STANDARD | WERKSTOFF NR. | GOST | UNS | BS | EN | JIS |
| Inconel 625 | 2.4856 | ХН75МБТЮ | N06625 | NA 21 | NiCr23Fe | NCF 625 |
Most Selling Nickel 625 Flange
ASTM B564 UNS N06625 Threaded Flange
ASTM B 564 UNS N06625 inconel 625 Slip on Flange ASME B16.5 (SOF)
inconel 625 UNS N06625 Weld Neck Raised Face Flanges
ASTM B 564 UNS N06625 Long Welding Neck Flange ASME B16.5(LWNF)
Alloy 625 Ring Joint Flange
625 Inconel Slip-on Raised Face Flanges
3/4” 150# Inconel Alloy ASTM B564 NO6625 Weld Neck Flanges
Nickel 625 Lap Joint Flange
ASTM B 564 UNS N06625 Lap Joint Flange ASME B16.5 (LJW)
ASTM B 564 UNS N06625 inconel 625 Threaded Flange ASME B16.5 (THW)
625 Alloy Blind Raised Face Flanges
inconel 625 flanges
WERKSTOFF Nr 2.4856 Blind Flange
Inconel Alloy 625 Spectacle Blind Flange
ASTM B564 Inconel 625 Slip On Flange
Nickel Alloy 625 Long Weld Neck Flange
Forged Flange Inconel 625 socket weld Flanges 4″ SCH40s
alloy 625 Blind Flanges 8”600LB SCH40s ASME B16.5
ANSI B16.5 Class 150 Slip-On Flanges 6″ 625 Alloy SORF Flange
DIN 2.4856 Reducing Flanges
ASTM Inconel 625 ASME B16.5 cl 150 rf flange
ASTM B 564 UNS N06625 Socket Welding Flange ASME B16.5 (SWF)
UNS N06625 Orifice Flange
Inconel625 UNS NO6625 Flange RF LJW Lap Joint Flange 12″ class900 ANSI B16.5
Class 600# 1/2”-24” UNS N06625 SOCKET WELD FLANGE
Nickel Alloy Inconel 625 Blind BL flanges 1″ DN25 Class300 ANSI B16.5 Forged RF
ASTM b16.47 plate rf 600# nickel alloy inconel 625 flanges
ASTM B 564 UNS N06625 Orifice Flange ASME B16.5
ASTM B 564 UNS N06625 inconel 625 Blind Flange ASME B16.5
alloy 625 flanges
ASTM B 564 UNS N06625 inconel 625 Welding Neck Flange ASME B16.5 (WNF)
ASME SB564 Alloy 625 Socket Weld Flange
Inconel 625 Flanges Stock List
| UNS N06625 Weld Neck Flanges | 625 Inconel Lap Joint Flanges |
| Alloy Din 2.4856 Long Weld Neck Flanges | ASTM B564 UNS N06625 Spectacle Blind Flanges |
| Alloy 625 Spades & Ring Spacers | ASTM B564 Inconel 625 Nipoflange |
| 625 Alloy 5D Weldoflange | Inconel UNS N06625 Flange Outlet |
| Inconel 625 Flanges | ASTM B564 Inconel 625 Blind Flange |
| Inconel 625 Forged Flanges | Alloy Din 2.4856 Plate Flanges |
| Inconel 625 Flanges | Alloy Din 2.4856 BS 10 Flanges |
| Alloy 625 BS 4504 Flanges | 625 Alloy EN 1092-1 Flanges |
| Inconel UNS N06625 SORF Flange | ASTM B564 UNS N06625 BLRF Flange |
| ASTM B564 Inconel 625 WNRF Flange | Inconel 625 Series a Lap Joint Ring Flanges |
| ASTM B564 UNS N06625 Slip on Flange | 625 Inconel Alloy Threaded Flange |
| Alloy 625 Reducing Flange | Inconel Alloy Din 2.4856 Socket Weld Flange |
| Inconel Alloy Din 2.4856 PN16 blind Flanges | Alloy 625 Socket Weld Pipe Flange |
| ASTM B564 UNS N06625 Class 300 slip on flange | Inconel UNS N06625 Slip On Weld Flange |
| 625 Inconel Tongue and Groove Flanges | ASTM B564 UNS N06625 Male and Female Flange |
| Inconel UNS N06625 Reducing Flanges | ASTM B564 Inconel 625 ASME B16.5 Flanges |
| Inconel 625 SWRF Flange | 625 Inconel Forged blind flange |
| ASTM B564 UNS N06625 weld neck flange | Inconel Alloy Din 2.4856 Socket Weld Flange |
| 625 Inconel Alloy Forged slip on flanges | ASTM B564 Inconel 625 Race face slip on flange |
| 625 Inconel Alloy Ring Type Joint Flanges | Alloy 625 Raised Face Flanges |
| Alloy 625 lap joint flange | ASTM B564 Inconel 625 Slip On flange |
| 625 Inconel Forged integral puddle flange | 625 Inconel Alloy table e long weld neck |
| ASTM B564 UNS N06625 Class 150 LBS Flange | 625 Inconel PN10 Forged Flanges |
We are Stockist of Class 150 WNR 2.4856 Reducing Flanges. We keep Ready Stock of Nickel 600 Spectacle Blind Flange
625 Inconel Plate Flange Dimension Table
| Nominal Pipe Size NPS (inches) |
Class 300 | ||||
|---|---|---|---|---|---|
| Diameter of Flange (inches) |
No. of Bolts |
Diameter of Bolts (inches) |
Diameter of Bolt Holes (inches) |
Bolt Circle (inches) |
|
| 1/4 | 3-3/8 | 4 | 1/2 | 0.62 | 2-1/4 |
| 1/2 | 3-3/4 | 4 | 1/2 | 0.62 | 2-5/8 |
| 3/4 | 4-5/8 | 4 | 5/8 | 0.75 | 3-1/4 |
| 1 | 4-7/8 | 4 | 5/8 | 0.75 | 3-1/2 |
| 1-1/4 | 5-1/4 | 4 | 5/8 | 0.75 | 3-7/8 |
| 1-1/2 | 6-1/8 | 4 | 3/4 | 0.88 | 4-1/2 |
| 2 | 6-1/2 | 8 | 5/8 | 0.75 | 5 |
| 2-1/2 | 7-1/2 | 8 | 3/4 | 0.88 | 5-7/8 |
| 3 | 8-1/4 | 8 | 3/4 | 0.88 | 6-5/8 |
| 3-1/2 | 9 | 8 | 3/4 | 0.88 | 7-1/4 |
| 4 | 10 | 8 | 3/4 | 0.88 | 7-7/8 |
| 5 | 11 | 8 | 3/4 | 0.88 | 9-1/4 |
| 6 | 12-1/2 | 12 | 3/4 | 0.88 | 10-5/8 |
| 8 | 15 | 12 | 7/8 | 1 | 13 |
| 10 | 17-1/2 | 16 | 1 | 1.12 | 15-1/4 |
| 12 | 20-1/2 | 16 | 1-1/8 | 1.25 | 17-3/4 |
| 14 | 23 | 20 | 1-1/8 | 1.25 | 20-1/4 |
| 16 | 25-1/2 | 20 | 1-1/4 | 1.38 | 22-1/2 |
| 18 | 28 | 24 | 1-1/4 | 1.38 | 24-3/4 |
| 20 | 30-1/2 | 24 | 1-1/4 | 1.38 | 27 |
| 24 | 36 | 24 | 1-1/2 | 1.62 | 32 |
Pressure Rating of Inconel 625 Flange
| ANSI/ASME B16.34 | ANSI PRESSURE RATING | ||||||
| Temperature °F | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
| -20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
| 200 | 235 | 620 | 825 | 1240 | 1860 | 3095 | 5160 |
| 300 | 215 | 560 | 745 | 1120 | 1680 | 2795 | 4660 |
| 650 | 125 | 445 | 590 | 890 | 1330 | 2220 | 3700 |
| 700 | 110 | 430 | 580 | 870 | 1305 | 2170 | 3620 |
| 400 | 195 | 515 | 685 | 1025 | 1540 | 2570 | 4280 |
| 500 | 170 | 480 | 635 | 955 | 1435 | 2390 | 3980 |
| 600 | 140 | 450 | 600 | 900 | 1355 | 2255 | 3760 |
| 750 | 95 | 425 | 570 | 855 | 1280 | 2135 | 3560 |
| 800 | 80 | 420 | 565 | 845 | 1265 | 2110 | 3520 |
| 1050 | 20 | 345 | 460 | 685 | 1030 | 1720 | 2865 |
| 1100 | 20 | 305 | 405 | 610 | 915 | 1525 | 2545 |
| 850 | 65 | 420 | 555 | 835 | 1255 | 2090 | 3480 |
| 900 | 50 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
| 950 | 35 | 385 | 515 | 775 | 1160 | 1930 | 3220 |
| 1000 | 20 | 350 | 465 | 700 | 1050 | 1750 | 2915 |
| 1150 | 20 | 235 | 315 | 475 | 710 | 1185 | 1970 |
| 1200 | 20 | 185 | 245 | 370 | 555 | 925 | 1545 |
| 1250 | 20 | 145 | 195 | 295 | 440 | 735 | 1230 |
| 1300 | 20 | 115 | 155 | 235 | 350 | 585 | 970 |
| 1350 | 20 | 95 | 130 | 190 | 290 | 480 | 800 |
| 1400 | 20 | 75 | 100 | 150 | 225 | 380 | 630 |
| 1450 | 20 | 60 | 80 | 115 | 175 | 290 | 485 |
| 1500 | 20 | 40 | 55 | 85 | 125 | 205 | 345 |
Inconel 625 Flange Weight Chart
| Standard | Class | Dia | Bolt Circle Dia | No. of Bolts | Bolt Sizes | Dia of Bolt Hole |
| AS4087 Flange | PN14 | 95 | 67 | 4 | M12 | 14 |
| AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| ANSI B16.5 Flanges | ANSI 300 | 95 | 67 | 4 | 13 | 16 |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 150 | 89 | 60 | 4 | 13 | 16 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN25 | 95 | 65 | 4 | M12 | 14 |
