Nickel 200 Flanges
Both specifications ASTM B564, as well as ASTM B366, cover nickel alloy products including parameters such as mechanical property, testing requirements and chemical composition. However, specification ASTM B366 pertains to fittings, including some kinds of Nickel 200 Flanges, while ASTM B564 envelopes a broader set of components, which is inclusive of flanges. Typically the Nickel Alloy ASTM B366 Lap Joint Flange is shaped or forged when operations such as hammering, pressing, piercing, bending, extruding, rolling, or fusion welding as well as upsetting, are performed on them. These flanges could also be shaped by a combination of two or more of the fore mentioned operations. ASTM B564 Nickel 200 Blind Raised Face Flange is used to close the ends of a piping system.
Check sizes & dimensions of Nickel 200 Weld neck raised face flange, Alloy 200 Slip On Raised Face Flange, Manufacturer of ASTM B564 Nickel 200 Blind Raised Face Flange in India.
Blind flanges are a round plate without a hole in the centre. However, blind flanges are produced with proper bolt holes in order to support the seal off a mechanism the end of the piping system. On the other hand, an Alloy 200 Slip On Raised Face Flange is essentially a ring shaped device that can be placed over the pipe end. The face of the flange extends from the end of the pipe by enough distance, such that the person attaching this flange is able to apply a weld bead on its inside diameter. Along with the inner diameter, the OD of this kind of flange is also welded on its backside. Nickel 200 Weld neck raised face flange is often used in applications where high pressure is a factor, especially since these flanges are designed to reduce the concentration of stress from the base of the hub while transferring the stress from a flange to the pipe.
Specification Chart of Nickel UNS N02200 Flange
Standards |
GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
Pressure Rating ANSI |
Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
Pressure Calculation in DIN |
10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
JIS |
16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
UNI |
10Bar 16Bar 6Bar 25Bar 40Bar |
EN |
6Bar 25Bar 40Bar 10Bar 16Bar |
Most common Types |
Threaded / Screwed / Forged / Plate |
Production technique |
- Forged, Heat treated and machined
|
Shapes and Types we produce |
Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
Test |
Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
Equipment |
Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
View Weight chart of UNS N02200 Weld Neck Ring Type Joint Flange, 200 Nickel Blind Ring Type Joint Flange, Supplier of Nickel Alloy ASTM B366 Lap Joint Flange, DIN 2.4066 Spectacle Flange in UAE.
Size Range of ASME SB366 Alloy 200 Pipe Flange
- Alloy 200 Flange : 1/2″ (15 NB) to 48″ (1200NB)
- 200 Nickel Slip on Flange : 1/2″ NB – 12″ NB
- ASTM B564 UNS N02200 Blind Flange : 1/2″ NB – 24″ NB
Ask for free sample of Nickel Alloy 200 Threaded Flange & Nickel Alloy DIN 2.4066 Flange or Nickel Alloy ASTM B564 200 Blind Flange, Nickel UNS N02200 Reducing Flange at Factory price in India. Get Free quote for ASME SB564M Nickel 200 Forged Flange, Ni A
Available Stock of 200 Nickel Alloy Flanges
Nickel Alloy 200 Weld Neck Flanges |
200 Nickel Lap Joint Flanges |
Nickel 200 Long Weld Neck Flanges |
200 Nickel Alloy Spectacle Blind Flanges |
Alloy 200 Spades & Ring Spacers |
ASME SB366 Alloy 200 Nipoflange |
ASTM B564 UNS N02200 5D Weldoflange |
Nickel Alloy 200 Flange Outlet |
Nickel UNS N02200 Flange |
ASME SB366 Alloy 200 Blind Flange |
Nickel UNS N02200 Forged Flanges |
Nickel 200 Plate Flange |
Nickel UNS N02200 Flanges |
Nickel 200 BS 10 Flanges |
Alloy 200 BS 4504 Flanges |
ASTM B564 UNS N02200 EN 1092-1 Flanges |
Nickel Alloy 200 SORF Flange |
200 Nickel Alloy BLRF Flange |
ASME SB366 Alloy 200 WNRF Flange |
Nickel UNS N02200 Series a Lap Joint Ring Flange |
200 Nickel Alloy Slip on Flange |
ASTM B564 UNS N02200 Threaded Flange |
Alloy 200 Reducing Flange |
Nickel 200 Socket Weld Flange |
Nickel 200 PN16 blind flange |
Alloy 200 Forged Socket Weld Pipe Flange |
200 Nickel Alloy Class 300 slip on flange |
Nickel Alloy 200 Slip On Weld Flange |
200 Nickel Tongue and Groove Flanges |
200 Nickel Alloy Male and Female Flange |
Nickel Alloy 200 Reducing Flanges |
ASME SB366 Alloy 200 ASME B16.5 Flanges |
Nickel UNS N02200 SWRF Flange |
200 Nickel Forged blind flange |
200 Nickel Alloy groove weld neck flange |
Nickel 200 Socket Weld Hub Flange |
ASTM B564 UNS N02200 Forged steel slip on flanges |
ASME SB366 Alloy 200 Race face slip on flange |
ASTM B564 UNS N02200 Ring Type Joint Flanges |
Alloy 200 Raised Face Flanges |
Alloy 200 threaded lap joint flange |
ASME SB366 Alloy 200 Slip On Integral flange |
200 Nickel Forged integral puddle flange |
ASTM B564 UNS N02200 table e long weld neck |
200 Nickel Alloy Class 150 LBS Flange |
200 Nickel PN10 Forged Flanges |
Price List of ASTM B564 UNS N02200 Slip On Flange
Nickel Alloy UNS N02200 Pipe Flange Price Per Piece in India |
Nickel Alloy ASTM B564 200 Flange Price in INR |
Nickel Alloy ASTM B564 200 Flange Price in USD |
Nickel Alloy ASTM B564 200 Flange Price in UAE Dirham |
ASTM B564 200 1-1/2″ blind flange Price in India |
43015.82 |
$619.2 |
UAE Dirham 2274.48 |
Nickel Alloy UNS N02200 Slip on Flange Price in India |
62467.42 |
$899.2 |
UAE Dirham 3302.99 |
Nickel Alloy ASTM B564 200 Slip-On Flange Price in India |
63974.92 |
$920.9 |
UAE Dirham 3382.70 |
ASTM B564 200 Nickel Alloy Threaded Flange Price List |
133820.06 |
$1926.3 |
UAE Dirham 7075.4 |
Nickel UNS N02200 Weld Neck Flange Price List |
65897.2 |
$950 |
UAE Dirham 348.94 |
ASTM B564 200 Weld Neck Flange Cost in Mumbai |
34509.3 |
$497.5 |
UAE Dirham 1827.3 |
Price of Nickel Alloy DIN 2.4066 3″ Blind Flange in India |
101106.64 |
$1455.4 |
UAE Dirham 5346.05 |
Price of ASME SB564M Nickel 200 2-1/2″ Slip-On Flange in Mumbai |
93756.71 |
$1349.6 |
UAE Dirham 4957.42 |
Cost of Ni Alloy 200 2″ Threaded Flange in India |
62623.2 |
$902.8 |
UAE Dirham 3316.21 |
Nickel Alloy ASTM B564 200 1-1/2″ Weld Neck Flange Price in India |
54334 |
$783.3 |
UAE Dirham 2877.1 |
Distributor of Nickel Alloy DIN 2.4066 Reducing Flange, Stockist of Nickel UNS N02200 Slip on Flange, ASME SB564M Nickel 200 Blind Flange & Ni Alloy 200 Slip On Flange in Mumbai, India
Composition Standard of Alloy 200 Flange
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Nickel 200 |
0.15 max |
0.35 max |
0.35 max |
0.01 max |
0.25 max |
0.40 max |
99.0 min |
Mechanical Behaviour of Nickel 200 Flanges
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 21500 , MPa – 148 |
Psi – 67000 , MPa – 462 |
45 % |
Material Equivalent of Nickel Alloy 200 Pipe Flange
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Nickel 200 |
2.4066 |
N02200 |
NW 2200 |
NA 11 |
НП-2 |
N-100M |
Ni 99.2 |
Manufacting high-class Nickel Alloy 200 Flanges in India, Purchase ASTM B564 200 Flange at factory price, contact Nickel Alloy UNS N02200 Threaded flange manufacturers in Mumbai, Pune & Chennai ? India for better price.
200 Nickel Plate Flange Dimensions
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
AS4087 |
PN14 |
95 |
67 |
4 |
M12 |
14 |
AS 2129 Flange |
Table C |
95 |
67 |
4 |
13 |
14 |
Table D |
95 |
67 |
4 |
13 |
14 |
Table E |
95 |
67 |
4 |
13 |
14 |
Table F |
95 |
67 |
4 |
13 |
14 |
Table H |
114 |
83 |
4 |
16 |
17 |
Table J |
114 |
83 |
4 |
16 |
17 |
ANSI B16.5 |
ANSI 150 |
89 |
60 |
4 |
13 |
16 |
ANSI 300 |
95 |
67 |
4 |
13 |
16 |
ANSI 600 |
95 |
67 |
4 |
13 |
16 |
ANSI 900 |
121 |
83 |
4 |
19 |
22 |
ANSI 1500 |
121 |
83 |
4 |
19 |
22 |
ISO 7005 (DIN) Flange |
PN6 |
80 |
55 |
4 |
M10 |
11 |
PN10 |
95 |
65 |
4 |
M12 |
14 |
PN16 |
95 |
65 |
4 |
M12 |
14 |
PN20 |
90 |
60.5 |
4 |
M14 |
16 |
PN25 |
95 |
65 |
4 |
M12 |
14 |
PN40 |
95 |
65 |
4 |
M12 |
14 |