Dinesh Industries > Duplex Pipe Fittings

Duplex Pipe Fittings

We at Dinesh Industries, provide top notch and quality assured pipe fittings to help you meet your needs and standards.
Until today, we are widely known Duplex pipe fittings manufacturer in India, where we assure good quality standards delivered at a reasonable pricing.

Although it offers excellent resistance to corrosion across wide range of environments, duplex steel fittings are offered to you at an affordable pricing, so we are helping you to save your pocket.
Wondering on what makes this pipe fittings so interesting? Well, this pipe fitting exhibits:

  • Good strength characteristics.
  • Excellent resistance to stress corrosion cracking.
  • Have greater resisting capabilities than other grades of stainless steel such as 304 and 316.
  • Exhibit magnetic properties.

We are a significant and well-known manufacturer of duplex 2205 fittings including alloy 2205 elbow and tee in India at most affordable cost as per ASME B16.9

Duplex pipe fittings

Duplex pipe fittings

Alloy 2205 Elbow

Alloy 2205 Elbow

Uns S31803 Tee

Uns S31803 Tee

ASTM A815 Duplex 2205 Reducer

ASTM A815 Duplex 2205 Reducer

DIN 1.4462 End Cap

DIN 1.4462 End Cap

Duplex Stainless Steel 2205 Stub End

Duplex Stainless Steel 2205 Stub End

Adding to this, quality assurance to an end user is our priority. We also ensure that duplex pipe fittings offer good resistance to intergranular corrosion, along with inheriting good corrosion resistance to stress corrosion cracking with the help of various testing methods such as:

  • Non-destructive testing or NDT
  • Destructive testing
  • Proof testing.
  • Hydrotesting.

These testing mainly enrich the quality standards of S32205 duplex fittings Along with this, it hardened by heat treatment processes. because they have high strength, it is found that duplex 2205 fittings exhibit lower machining characteristics than the grade 304.

But with the help of cutting edges, chip breakers, etc, we can enhance the machining characteristics. Based on the above mentioned characteristics, we have been providing such quality services to the customers and industries who need products from us; since a long period of time. This is one of the reasons why we are also known to have large customer base, by bringing smiles with our services.

Table of Content

Duplex 2205 Fittings

Duplex 2205 Fittings

Standard Specification of Duplex Pipe Fittings

size range Duplex steel pipe fittings standard Schedule
  • Seamless: 1/2″to 10″
  • Welded: 1/2″to 48″
  • ANSI/ ASME B16.25
  • ANSI/ ASME B16.25
  • JIS B2312
  • ANSI/ ASME B16.28
  • MSS SP-75
  • MSS-SP-83
  • MSS-SP-95
  • ANSI/ ASME B16.9
  • MSS-SP-43 (Type A/ Type B)
  • JIS B2313
  • API 590-605
  • SCH 140
  • SCH 160
  • XH
  • SCH 10
  • SCH 100
  • SCH 60
  • SCH 120
  • SCH 20
  • STD
  • SCH 80
  • XXH
  • SCH 40
ASTM standard Duplex 2205 fittings ends Manufacturing technique of duplex 2205 pipe fittings
ASTM A815 Bevelled  Hot forming
Types of elbow duplex Types of DIN 1.4462 reducer Uns S31803 tee types
  • 90 degree elbow
  • short radius elbow
  • 45 degree elbow
  • 180 degree elbow
  • long radius elbow
  • Eccentric reducer
  • Concentric reducer
  • Reducing Tee (Unequal)
  • Equal Tee (Straight Tee)
Our duplex steel buttweld fittings complete the requirements of Bespoke duplex pipe fittings manufacturer in India UNS S32205 elbow testing
  • ISO 15156
  • MTC EN 10204 / 3.1B
  • NACE TM-0284
  • Sour service
  • NACE MR0175
  • NACE MR0103
  • Stub End
  • Elbow(45° C, 90° C, 180° C)
  • Pipe Bend
  • Reducer
  • Tee
  • Cap
  • Ultrasonic test
  • Magnetic Particle Examination
  • PMI test
  • HIC tested
  • 100% Radiography Tested
Production method ASTM A815 material services we offer Bevel types of duplex stainless steel pipe fittings
  • Welded fittings
  • Seamless fittings
  • Fabricated
  • Saw cutting
  • Threading
  • Polishing
  • Torch cutting
  • Plasma cutting
  • Hot dipped galvanized
  • Grinding
  • Beveling
  • Welding
  • Compound Bevel
  • Plain Bevel
2205 duplex steel
elbow radius		 Manufacturing process duplex steel pipe bending radius
  • Short radius (90 & 45 degree)
  • Long radius ( 90 & 45 degree)

 
  • Push
  • Press
  • Forge
  • Cast
  • 8D bend
  • 10D bend
  • 180 degree long radius bend
  • 4D bend
  • 180 degree short radius bend
  • 5D bend
  • 1D bend
  • 3D bend
Key market of 2205 duplex fittings Origin Marking of duplex steel fittings
  • Nuclear power (mostly seamless).
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Petrochemicals and acids.
  • Japanese
  • European
  • Indian
  • Russian
  • Korean
  • USA
  • Ukraine
  • Sizes
  • Manufacturing date
  • Manufacturer logo / name
  • Material grade

 
Other types of 2205 duplex stainless steel fittings Angle of bending Duplex steel 2205 fittings bending technique
  • Cross
  • Stub end
  • Cap
  • 60°
  • 30°
  • 45°
  • 90°
  • 15°
  • 135°
  • 180°
  • Rotary Draw Bending
  • Mandrel Bending
  • Roll Bending
  • Hot Induction Bending
  • Ram-Type Bending

As a trusted supplier in Mumbai since 20 years , we are experts in delivering duplex steel fittings like ASTM A815 UNS S31803 reducer and stub end that perfectly satisfies your needs.

UNS S32205 Duplex F60 Pipe Fittings Size Range

  • SS UNS S32205 Seamless ButtWeld Fittings : 1/2 – 10 inch
  • Duplex Stainless Steel 32205 Welded Pipe Fittings : 1/2″ – 48″
  • Duplex 2205 UNS S32205 Fittings : ½” NB to 24″ NB

Since we are a stockist We have and provide various duplex steel buttweld fittings with size ranging from 1/2″ to 48″ (welded) and from 1/2″ to 10″ (seamless) at best price, view sizes and weight chart

Check Duplex 2205 UNS S32205 Fittings Price List

Price Per Piece in India Price in INR ASTM A815 UNS S31803 Weld Fittings Price in USD Price in UAE Dirham
Duplex Steel ASTM A815 1/2″ Tee 97761.88 $1407.2 UAE Dirham 5167.98
Duplex Steel 2205 90 Deg LR Seamless Elbow 90049.32 $1296.2 UAE Dirham 4760.27
ASTM A815 Steel UNS S31803 1-1/2″ 45″ Elbow 19871.99 $286 UAE Dirham 1050.49
Duplex Steel S32205 1-1/4″ 45″ Elbow 17009.32 $244.8 UAE Dirham 899.16
ASME SA815M Duplex Steel 2205 1/2″ Schedule 10 Stub End 12756.99 $183.6 UAE Dirham 674.37
Steel ASTM A815 Stub End 15077.70 $217 UAE Dirham 797.05
UNS S32205 2-1/2″ Schedule 10 Stub End 37506.65 $539.8 UAE Dirham 1982.71
Duplex 2205 1/8″ Tee 13347.59 $192.1 UAE Dirham 705.59
2205 Duplex Class 3000 1/8″ Elbow 49381.21 $710.7 UAE Dirham 2610.44
ASTM A815 Steel UNS S31803 1″ Schedule 40 Stub End 17690.24 $254.6 UAE Dirham 935.16

 

Export to Elbow Size Price Estimated delivery days from India
Malaysia 3/4 in. US $23.40 10
Italy 1/2 in. US $23.22 30
Indonesia 1-1/4 in. US $31.62 9
Philippines 1 in. US $23.40 14
Oman 1-1/2 in. US $26.56 5
Jordan 2-1/2 in. US $65.30 21
Cyprus 3 in. US $65.06 45
Norway 2 in. US $31.62 45
Algeria 4 in. US $117.70 45
Sudan 1/2  US $8.19 30
Equatorial Guinea 1 US $7.59 45-60
Trinidad And Tobago 8 US $124.34 60
Angola 5 in. US $391.02 45
The Republic Of Congo 1/2 US $10.80 45-60
Canada 1 1/4 US $12.29 45
Gabon 3/4 US $6.42 45-60
Mexico 1 1/2 US $12.29 45
Costa Rica 5 US $167.18 45
Panama 2 1/2  US $14.03 45
Puerto Rica 6 US $130.92 45

Different Types of Duplex 2205 Pipe Fittings

Duplex steel Stainless Steel 90D S32205 Elbow

Duplex steel Stainless Steel 90D S32205 Elbow

S31803 butt welded duplex pipe fitting

S31803 butt welded duplex pipe fitting

concentric reducer 2205 duplex steel 6 inch

concentric reducer 2205 duplex steel 6 inch

Duplex Steel BW S32750 Equal Tee

Duplex Steel BW S32750 Equal Tee

Elbow ANSI B16.9 SUS 2205 1-1/2'' 90D Long Radius

Elbow ANSI B16.9 SUS 2205 1-1/2” 90D Long Radius

Reducer Duplex 2205

Reducer Duplex 2205

Equal Tee 8 INCH SCH40 BW Seamless ASME B16.9 A815 S32205

Equal Tee 8 INCH SCH40 BW Seamless ASME B16.9 A815 S32205

SUS 2205 4

SUS 2205 4″ 1.5 D 90D Short Radius SCH40 ANSI B16.9

Duplex 2205 Pipe Fittings

Duplex 2205 Pipe Fittings

duplex stainless steel elbow

duplex stainless steel elbow

2205 duplex stainless steel fittings

2205 duplex stainless steel fittings

ASME SA 403 Duplex Reducing Tee

ASME SA 403 Duplex Reducing Tee

duplex steel elbow

duplex steel elbow

ASME SA 403 Duplex Pipe Reducer

ASME SA 403 Duplex Pipe Reducer

Duplex Stainless Steel 2205 Short Stub End

Duplex Stainless Steel 2205 Short Stub End

WERKSTOFF NR. 1.4462 End Cap

WERKSTOFF NR. 1.4462 End Cap

We can provide specialised duplex 2205 pipe end cap and long/short radius elbow with the best possible quality, never forget to evaluate our price with other duplex pipe fittings manufacturer in India

Chemical Equation of ASTM A815 Alloy 2205 Reducer

C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal

Mechanical Characteristics of Alloy 2205 Elbow

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Physical Properties of 2205 Duplex Seamless Fittings

Density (Kg / M3) Modulus of Elasticity (GPa) Poisson’s Ratio Thermal Conductivity (W/moC) Thermal Capacity (I/KgoC) Electrical Resistivity
7800 200 0.3 15 500 0.80
We commit to providing DIN 1.4462 cross and concentric/ eccentric reducer as quickly as possible with the required documentation, view duplex steel elbow properties also

Equivalent Material of Uns S31803 Stub End

STANDARD WERKSTOFF NR. UNS
2205 1.4462 / 1.4462 S31803

Dimension of Duplex Stainless Steel 32205 Pipe Fittings

Nominal
PipeSize		 Outside
Diameter		 90° Elbows 45° Elbows 180° Returns
(inches)
Long Radius
Short Radius
Long Radius
Long Radius
(mm)
(inches)
Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2
21.3
0.840
1 1/2
–
5/8
2
1 7/8
3/4
26.7
1.050
1 1/8
–
7/16
2 1/4
1 11/16
1
33.4
1.315
1 1/2
1
7/8
3
2 3/16
1 1/4
42.2
1.660
1 7/8
1 1/4
1
3 3/4
2 3/4
1 1/2
48.3
1.900
2 1/4
1 1/2
1 1/8
3
4 1/2
3 1/4
2
60.3
2.375
3
2
1 3/8
4
6
4 3/16
2 1/2
73.0
2.875
3 3/4
2 1/2
1 3/4
5
7 1/2
5 3/16
3
88.9
3.500
4 1/2
3
2
6
9
6 1/4
3 1/2
101.6
4.000
5 1/4
3 1/2
2 1/4
7
10 1/2
7 1/4
4
114.3
4.500
6
4
2 1/2
8
12
8 1/4
5
141.3
5.563
7 1/2
5
3 1/8
10
15
10 5/16
6
168.3
6.625
9
6
3 3/4
12
18
12 5/16
8
219.1
8.625
12
8
5
12
24
16 5/16
10
273.1
10.750
15
10
6 1/4
15
30
20 3/8
12
323.9
12.750
18
12
7 1/2
18
36
24 3/8

Pressure Rating Chart of ASME SA 403 Uns 2205 Fittings

NPS
(inch)		 Pipe Sch. Wall
Thk.
(in)		 OD
(inch)		 Temperature
100 200 300 400 500
Allowable Stress (Pressure Rating)
16700 16700 16700 15500 14400
1″ 40 0.133 1.315 2205 2205 2205 2047 1902
80 0.179 1.315 3061 3061 3061 2841 2640
160 0.250 1.315 4493 4493 4493 4170 3874
1 1/2″ 40 0.145 1.900 1629 1629 1629 1512 1404
80 0.200 1.900 2303 2303 2303 2138 1986
160 0.281 1.900 3362 3362 3362 3120 2899
2″ 40 0.154 2.375 1371 1371 1371 1272 1182
80 0.218 2.375 1985 1985 1985 1843 1712
160 0.344 2.375 3283 3283 3283 3047 2831
3″ 40 0.216 3.500 1301 1301 1301 1208 1122
80 0.300 3.500 1844 1844 1844 1712 1590
160 0.438 3.500 2787 2787 2787 2587 2403
4″ 40 0.237 4.500 1102 1102 1102 1023 950
80 0.337 4.500 1596 1596 1596 1482 1377
160 0.531 4.500 2611 2611 2611 2424 2552
5″ 40 0.258 5.563 965 965 965 896 832
80 0.375 5.563 1428 1428 1428 1325 1231
160 0.625 5.563 2474 2474 2474 2296 2133
6″ 40 0.280 6.625 877 877 877 814 756
80 0.432 6.625 1379 1379 1379 1280 1189
160 0.719 6.625 2382 2382 2382 2211 2054
8″ 40 0.322 8.625 771 771 771 716 665
80 0.500 8.625 1218 1218 1218 1131 1050
160 0.906 8.625 2298 2298 2298 2133 1982
10″ 40 0.365 10.750 699 699 699 649 603
80 0.594 10.750 1159 1159 1159 1075 999
160 1.125 10.750 2289 2289 2289 2124 1974

Alloy 2205 Elbow Degrees

Werkstoff Nr. 1.4462 Elbow 180deg. LR

Werkstoff Nr. 1.4462 Elbow 180deg. LR

Duplex Stainless Steel 2205 Elbow 45deg. LR

Duplex Stainless Steel 2205 Elbow 45deg. LR

Duplex Ss 2205 90 Degree Elbow

Duplex Ss 2205 90 Degree Elbow

Duplex Steel 2205 Elbow 90deg. SR

Duplex Steel 2205 Elbow 90deg. SR

Saf 2205 Elbow 90deg. LR

Saf 2205 Elbow 90deg. LR

Uns 2205 Duplex 180 Degree Elbow

Uns 2205 Duplex 180 Degree Elbow

2205 Uns S31803 45 Degree Elbow

2205 Uns S31803 45 Degree Elbow

Duplex 2205 Uns S31803 Elbow 180deg. SR

Duplex 2205 Uns S31803 Elbow 180deg. SR

Available ASTM A815 UNS S31803 Elbow Types

SCH80 high pressure DSS uns s31803 elbow

SCH80 high pressure DSS uns s31803 elbow

astm a815 uns s31803 wp-s welded elbows

astm a815 uns s31803 wp-s welded elbows

Butt welded s31803 stainless steel LR Seamless elbows

Butt welded s31803 stainless steel LR Seamless elbows

2205 Duplex Stainless ASME B16.9 SCH 40 elbow

2205 Duplex Stainless ASME B16.9 SCH 40 elbow

ASTM A815 Duplex 2205 LR Elbow

ASTM A815 Duplex 2205 LR Elbow

Alloy 2205 Miter Bend

Alloy 2205 Miter Bend

ASME B16.9 Duplex 2205 Reducing Elbow

ASME B16.9 Duplex 2205 Reducing Elbow

astm a815 uns s31803 Return Bends

astm a815 uns s31803 Return Bends

sch 40 90 degree 2205 Stainless Steel seamless Pipe Elbows

sch 40 90 degree 2205 Stainless Steel seamless Pipe Elbows

Duplex 2205 Steel Buttweld Elbow

Duplex 2205 Steel Buttweld Elbow

22cr Duplex SR Elbow

22cr Duplex SR Elbow

Different Types of Alloy 2205 Bends

uns s31803 duplex long radius bend

uns s31803 duplex long radius bend

duplex uns s31803 10D Pipe Bend

duplex uns s31803 10D Pipe Bend

DSS uns s31803 1D Pipe Bend

DSS uns s31803 1D Pipe Bend

astm a815 uns s31803 wp-s 3D Pipe Bend

astm a815 uns s31803 wp-s 3D Pipe Bend

s31803 stainless steel 5D Pipe Bend

s31803 stainless steel 5D Pipe Bend

2205 Duplex Stainless 2D Pipe Bend

2205 Duplex Stainless 2D Pipe Bend

ASTM A815 Duplex 2205 1.5D Pipe Bend

ASTM A815 Duplex 2205 1.5D Pipe Bend

Alloy 2205 180º Bends

Alloy 2205 180º Bends

Saf 2205 Hot Induction Bend

Saf 2205 Hot Induction Bend

Uns 2205 Duplex short radius bend

Uns 2205 Duplex short radius bend

Available Stock of Duplex Pipe Fittings

UNS S32205 Duplex F60 Fittings Duplex UNS S32205 Pipe Fitting
Duplex SS 32205 90 Degree Elbow Duplex 2205 UNS S32205 End Cap
Duplex SS UNS S32205 45 Degree Elbow SS Duplex 2205 Buttweld Fitting
Duplex SS 32205 3D Elbow ASTM A815 Duplex Steel S32205 End Cap
SS Duplex 2205 5D Elbow UNS S32205 Reducer
Duplex SS UNS S32205 Equal Cross UNS S32205 Pipe Cap
UNS S32205 Duplex F60 Lateral Tee 2205 UNS S32205 Cross Tee
ASTM A815 Duplex Steel S32205 1D Elbow Duplex Stainless Steel 32205 Short Stub End
SS Duplex 2205 Stub End UNS S32205 Duplex F60 Pipe Cap
UNS S32205 Duplex F60 Buttweld Fittings 2205 UNS S32205 Pipe Bend
Duplex SS UNS S32205 Pipe Fittings ASTM A815 Duplex Steel S32205 Long Stub End
SS 2205 Eccentric Reducer 2205 UNS S32205 Long Radius Elbow

UNS S31803 Weld Fittings Weight Chart

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91

Dimensions of ANSI B16.9 SAF 2205 Reducer

Nominal
Pipe Size		 Outside
Diameter		 Reducers
Reduced from
(inches)
(mm)
(inches)
Reduced to
(inches)
Concentric & Eccentric Length
(inches)
1/2
21.3
0.840
1/4
1 1/2
3/8
1 1/2
3/4
26.7
1.050
3/8
2
1/2
2
1
33.4
1.315
3/8
2
1/2
2
3/4
2
1 1/4
42.2
1.660
1/2
2
3/4
2
1
2
1 1/2
48.3
1.900
1/2
2 1/2
3/4
2 1/2
1
2 1/2
1 1/4
2 1/2
2
60.3
2.375
3/4
3
1
3
1 1/4
3
1 1/2
3
2 1/2
73.0
2.875
1
3 1/2
1 1/4
3 1/2
1 1/2
3 1/2
2
3 1/2
3
88.9
3.500
1
3 1/2
1 1/2
3 1/2
2
3 1/2
2 1/2
3 1/2
3 1/2
101.6
4.000
1 1/4
4
1 1/2
4
2
4
2 1/2
4
3
4
4
114.3
4.500
1 1/2
4
2
4
2 1/2
4
3
4
3 1/2
4
5
141.3
5.563
2
5
2 1/2
5
3
5
3 1/2
5
4
5
6
168.3
6.625
2 1/2
5 1/2
3
5 1/2
3 1/2
5 1/2
4
5 1/2
5
5 1/2
8
219.1
8.625
3
6
3 1/2
6
4
6
5
6
6
6
10
273.1
10.750
4
7
5
7
6
7
8
7
12
323.9
12.750
5
8
6
8
8
8
10
8

Certifications and End Prep of A815 Duplex Steel Stub Ends

End Prep:

  • Beveled Ends
  • Victaulic Grooves
  • Flanged Ends
  • Squared Ends
  • Threaded Ends (Male Only)

Certifications:

  • MSS-SP 43
  • ASME SA 815 / 403
  • ASME SB 366
  • ASME B 16.9 short pattern / long pattern
  • Bevelled in compliance with ASME B 16.25

Heat Resistance and Heat Treatment of Duplex Ss 2205 Buttweld Fittings

Heat Resistance 300°C
Heat Treatment 1020 – 1100°C
Registered Office: 23, Dhumal House, 1st Floor, Room No.4, 1st Carpenter Street, Mumbai, India
Phone No.: +91 22 66103554 | Email: info@dineshindustries.com DMCA.com Protection Status
Factory: Rakhial Road, Rakhial, Ahmedabad, Gujarat, India
Copyright © 2021 Dinesh Industries | All Right Reserved. Design and SEO By Mesotek