The SABS, or as referred to as SANS is the South African National standard has developed specification SABS 1123 as a standard intended to be used for water and sanitation along with Equipment and systems as well as Metallic pipes and fittings. Typically the sabs 1123 flange material includes several stainless steel grades such as alloy 304 and 316, nickel alloys such as Inconel and Hastelloy, carbon steel as well as alloy steel.
SABS 1123 Flanges
SABS 1123 table 1000/3 flanges
SABS 1123 Flanges Standards
This standard used in the production of SABS 1123 table 1000/3 flanges specifies requirements for the material to be used in addition to dimensions. It is interesting to note that there are six types of SABS 1123 Flanges Dimensions suitable for working pressures up to 4 000 kPa. These flanges have the ability to perform well between working temperatures in the range −10 °C to 200 °C. The sabs 1123 pipe flanges used to connect a piping system to a pressure vessel is required to comply with the relevant requirements of the standard keeping in accordance with which the characteristics of the manufactured pressure vessel. Two of the most predominant users of the sabs 1123 table 1000/3 flanges include the petrochemical industry as well as the power industry.
Table of Content
Size Chart | 1/2″ to 48″ (15 NB) to (1200NB) |
---|---|
Pressure Rating Chart ANSI | 300 LBS, 600 LBS, 2500 LBS, 900 LBS, 150 LBS, 1500 LBS |
Coating | Oil Black Paint, Yellow Transparent, Zinc Plated, Anti-rust Paint, Cold and Hot Dip Galvanized |
DIN / JIS / UNI / EN | 16Bar, 6Bar, 25Bar, 40Bar, 10Bar / PN10, PN25, PN64, PN16, PN6, PN40 |
Connect Types/ Flange Face Types Manufacturer | RF, Small Tongue, RTJ, FF, LJF, Large Tongue & Groove |
Common Types | Threaded / Screwed / Forged / Plate |
Manufacturer of |
ANSI DIN, GOST, UNI, BS, AS2129, JIS, NFE, AWWA, SABS, EN etc. |
Equipment | Sand-blasting machine, Press machine, Bending machine, Pushing Machine, electric bevelling machine etc |
Test | Direct-reading Spectrograph, X-ray detector, Magnetic particle detector, UI trasonic flaw detector, ydrostatic testing machine |
Origin | West Europe / Japan / Indian / USA / Korean |
Standards | DIN, ASME/ANSI B16.5/16.36/16.47A/16.47B, ANSI/ASME B16.5, B16.47 Series A & B, API7S-15, API7S-43, API605, B16.48, BS4504, EN-1092, JISB2220, BS1560-3.1, MSS S44, ISO70051, BS 10, EN1092 |
TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detectorEquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Stainless Steel | ASTM A182 Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
Carbon Steel | High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80), A105N, ASTM A350 LF2 / ASME SA350, ASTM/ASME A/SA105 A/SA105N & ASTM A105 / ASME SA105 |
Duplex Steel | ASTM A 182, ASME SA 182 UNS NO S31803, S32205. Werkstoff No. 1.4462 |
Nickel Alloy | ASTM / ASME SB 564 UNS 4400 (MONEL 400 ), UNS 2200 ( NICKEL 200 ), UNS 8825 INCONEL (825), UNS 2201 (NICKEL 201 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 6600 (INCONEL 600 ), UNS 10276 ( HASTELLOY C 276 ) |
Copper Nickel | Cupro Nickel 70/30 (C71500), Copper Nickel 90/10 (C70600 ), ASTM / ASME SB 62 / 151 / 61 / 152, UNS C71640 |
Alloy Steel | F11, F12, F5, F9, F22, F91 |
Pipe Outside Diameter | ID | Outside Diameter | Thickness | PCD | No Holes | Hole ID | Weight | Radius |
mm | mm | mm | mm | mm | mm | KG | mm | |
40 | 140 | 10 | 100 | 4 | 18 | |||
63 | 165 | 12 | 125 | 4 | 18 | |||
50 | 150 | 10 | 110 | 4 | 18 | |||
75 | 185 | 12 | 145 | 4 | 18 | |||
110 | 220 | 12 | 180 | 8 | 18 | |||
90 | 200 | 12 | 160 | 8 | 18 | |||
125 | 220 | 12 | 180 | 8 | 18 | |||
160 | 285 | 16 | 240 | 8 | 22 | |||
140 | 250 | 14 | 210 | 8 | 18 | |||
180 | 285 | 16 | 240 | 8 | 22 | |||
225 | 340 | 18 | 295 | 8 | 22 | |||
200 | 340 | 18 | 295 | 8 | 22 | |||
250 | 395 | 18 | 350 | 12 | 22 | |||
315 | 445 | 22 | 400 | 12 | 22 | |||
280 | 395 | 20 | 350 | 12 | 22 | |||
355 | 505 | 25 | 460 | 16 | 22 | |||
450 | 615 | 30 | 565 | 20 | 26 | |||
400 | 565 | 25 | 515 | 16 | 26 | |||
500 | 670 | 30 | 620 | 20 | 26 | |||
630 | 835 | 36 | 780 | 20 | 26 | |||
560 | 730 | 35 | 675 | 20 | 26 |
SABS 1123 Weld Neck Flanges | US $0.5-1000 / Piece (FOB Price) |
SABS 1123 Threaded Flanges | US $300-500 / Ton (FOB Price) |
SABS 1123 forged Flanges | US $1-900 / Piece (FOB Price) |
SABS 1123 Socket Weld Flanges | US $0.5-1000 / Piece (FOB Price) |
SABS 1123 Blind Flanges | US $1-300 / Piece (FOB Price) |