Stainless Steel 304 Flanges are some of the most widely used flanges of all. Dinesh Industries is a manufacturer and supplier of 304 grade stainless steel materials including flanges. We offer a wide range of flanges in this grade and in different types as well. Our SS 304 plate flange is a metallic ring that is used to add to the attachment surface at the end of a pipe. Since the 304 material is strong and has an extent of corrosion resistance, it is suitable for more general service applications. Also, the pricing is very cheaper, these are used widely. The a182 is a specification for fittings in the 304, 304L and 304H grades of steels.
Stainless Steel 304 Flanges
ASTM A182 f304 flange
SA 182 F304 Pipe Flange
The ASTM a182 f304 flange therefore has the advantages of cost effectiveness, strength and corrosion resistance. The ASME sa 182 f304 pipe flange types can vary. There are socket weld, weld neck, slip on, lap joint and threaded flanges. The f304 blind flange is different from all other types in that it is not used to connect two pieces together. Rather, it is applied to close a pipeline. The UNS S30400 flange is made up of this 304 chromium nickel alloy and we can cater any order of 304 stainless steel flanges. You can contact us for more information.
Stainless Steel 304 Flanges
Table of Content
Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
---|---|
Standards | API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092 |
Pressure Rating ANSI | 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS |
Pressure Calculation in DIN | 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Coating | Anti-rust Paint, Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent |
Most common types | Forged / Threaded / Screwed / Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
Test | Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector |
Equipment | Bending machine, Pushing Machine,Press machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Manufacturer of |
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Uses & application |
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
ASTM A182 Grade F304 Long Weld Neck Flanges
720 psi SS 304 Flange
ASTM A182 Gr F304 Pipe Flanges
ASME SA182 F304 Welding Neck Flanges
A182 F304 Socket Welded Flange, PN50, DN25, THK SCH 40, RF End
ASTM A182 Type 304 Slip On Flanges
304 Stainless Steel Flanges
ASTM A182 F304 Blind Flanges
A182 Gr F304 Orifice Flanges
Class 600 Stainless Steel Flanges
ASME B16.5 A182 Gr F304 Blind Flanges
SA182 Grade F304 Socket Weld Flange
SS DIN 1.4301 Blind Flanges
ASTM A182 Gr F304 ANSI 150 Flanges
ASTM A182 Grade F304 Pipe Flange
Stainless Steel ASTM A182 F304 Weld Neck Flange
SS 304 Lapped joint Flanges
Large Diameter SS 304 Slip On Flange
ASTM A182 Grade F304 Threaded Flanges
F304 AWWA SO Flange, DN300, Class D, STD Bore
Forged A182 Grade F304 Lap Joint Flanges
ASTM A182 Gr F304 Figure 8 Flanges
SS Grade F304 Spacer Flanges
A182 Gr F304 Exhuast Flanges
ASTM A182 F304 Lapped Joint Flange, DN25, ANSI B16.5
Stainless Steel F304 Socket Weld Flanges
ASTM A182 F304 Flanges
ANSI B16.5 Weld Neck Flange, ASTM A182 F304, PN150, DN350
ASTM A182 F304 Plate Flange, 120 LB, 5 Inch
SA182 Gr F304 Blank Flanges Rotatable
Stainless Steel UNS S30400 WNRF Flanges
SA182 F304 Spade Flanges
A182 F304 Spade Ring Blind Flanges, DN50, PN50
ASME B1.20.1 Class 300 Stainless Steel 304 Threaded Flanges
ASTM A182 304 SS Flanges
ASTM A182 304 SS Plate Flanges
Price list of Stainless Steel 304 Flange | 304 SS Flange Price in INR | 304 SS Flange Price in USD | 304 SS Flange Price in UAE Dirham |
---|---|---|---|
FLANGES STAINLESS STEEL : WN RF, 150#, SS 10S BORE, SA/A182GR.F304 | 419 | $5.71 | UAE Dirham 20.98 |
FLANGES STAINLESS STEEL : WN RF, 150#, SS 10S BORE, SA/A182GR.F304 | 480 | $6.54 | UAE Dirham 24.03 |
FLANGES STAINLESS STEEL : SW RF, 300#, SS 40S BORE, SA/A182GR.F304 | 240 | $3.27 | UAE Dirham 12.02 |
FLANGES STAINLESS STEEL A 182 GR F304/304L FLG WN 150 RF 20B462 40/S BORE ITEM FLANGE-TYPE-WELD NECK | 813 | $11.08 | UAE Dirham 40.71 |
Grade 304 stainless steel flange is excellent in a wide range of atmospheric environments and many corrosive media, Grade 304 is considered to be resistant to potable water up to approximately 200 mg/L chlorides at ambient temperatures.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100 °C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
---|---|---|---|---|---|---|---|---|---|
0-100 °C | 0-315 °C | 0-538 °C | at 100 °C | at 500 °C | |||||
304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
Stainless Steel 304 Flange | UNS S30400 Blind Flange |
304 SS Slip on Flange | SS A182 F304 Threaded Flange |
ASME SA182 F304 Reducing Flange | ASTM A182 F304 Socket Weld Flange |
SS 304 Flanges | 304 Stainless Steel Lap Joint Flanges |
ASTM A182 F304 Long Weld Neck Flanges | 304 SS Spectacle Blind Flanges |
ASME SA182 F304 Spades & Ring Spacers | UNS S30400 Nipoflange |
SS A182 F304 5D Weldoflange | Stainless Steel 1.4301 Flange Outlet |
Stainless Steel 304 Forged Flanges | ASTM A182 F304 Plate Flange |
SS A182 F304 Ring Type Joint Flanges | ASME SA182 F304 Raised Face Flanges |
304 Stainless Steel Tongue and Groove Flanges | 304 SS Male and Female Flange |
Stainless Steel 1.4301 Reducing Flanges | UNS S30400 ASME B16.5 Flanges |
Stainless Steel 304 Flanges | ASTM A182 F304 BS 10 Flanges |
ASME SA182 F304 BS 4504 Flanges | SS A182 F304 EN 1092-1 Flanges |
Stainless Steel 1.4301 SORF Flange | 304 SS BLRF Flange |
UNS S30400 WNRF Flange | Stainless Steel 304 Series a Lap Joint Ring Flange |
ASTM A182 F304 PN16 blind flange | ASME SA182 F304 Forged Socket Weld Pipe Flange |
304 SS Class 300 slip on flange | Stainless Steel 1.4301 Slip On Weld Flange |
SS A182 F304 Forged steel slip on flanges | UNS S30400 Race face slip on flange |
Stainless Steel 304 SWRF Flange | 304 Stainless Steel Forged blind flange |
304 SS groove weld neck flange | ASTM A182 F304 Socket Weld Hub Flange |
ASME SA182 F304 threaded lap joint flange | UNS S30400 Slip On Integral flange |
304 Stainless Steel Forged integral puddle flange | SS A182 F304 table e long weld neck |
304 SS Class 150 LBS Flange | 304 Stainless Steel PN10 Forged Flanges |
ASTM A182 F304 Stainless Steel Flanges | SS 304 Slip On Flange |
ASTM A182 gr F304 Flange | A182 Gr F304 SORF |
SS 304 Blind Flange | ASTM A182 F304 Flanges |
SA 182 Gr F304 Socket Weld Flanges | A182 F304 Material |
FNPT A182 F304 Flange | A182 Grade F304 BLRF |
ASME SA182 F304 Lap Joint Flange | A182 Gr F304 SORF |
150 psi SS 304 Flanges | ASTM A182 SS 304 Blank Flanges |
Stainless Steel 304 Flanges | ASTM A182 F304 Swivel Flanges |
SS 304 Blind Flange | SS 304 SORF Flange |
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 Flanges | PN14 Flanges | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C Flanges | 95 | 67 | 4 | 13 | 14 |
Table D Flanges | 95 | 67 | 4 | 13 | 14 | |
Table E Flanges | 95 | 67 | 4 | 13 | 14 | |
Table F Flanges | 95 | 67 | 4 | 13 | 14 | |
Table H Flanges | 114 | 83 | 4 | 16 | 17 | |
Table J Flanges | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 Flanges | ANSI 150 Flanges | 89 | 60 | 4 | 13 | 16 |
ANSI 300 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 Flanges | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 Flanges | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 Flanges | 80 | 55 | 4 | M10 | 11 |
PN10 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN16 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN20 Flanges | 90 | 60.5 | 4 | M14 | 16 | |
PN25 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN40 Flanges | 95 | 65 | 4 | M12 | 14 |
ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
PRESSURE CLASS | PN 2.5 TO PN 40 |
BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
PRESSURE CLASS | PN 2.5 TO PN 400 |
BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
TABLE | D, E, F, H |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
PRESSURE CLASS | PN 6 TO PN 100 |